Originally Posted by Sheefo2k
(Post 16390303)
Lol smart man. Not much on the daily wagon yet but I did buy a E63 AMG.
|
I do gotta get back to posting pictures LOL. I will defiantly take some once the weather warms up here in Minnesota. The AMG was a deal I couldn't pass up. Super clean 2011 6.2L NA with 29K miles summer garage queen.
|
Originally Posted by jobata23
(Post 16345558)
I finally replaced the factory Battery with a better one and went with Optima Red 35 series with A V6 battery strap. Also after replacing the old battery with the Red Top, My Bluetooth stop disconnecting from my Iphone. https://cimg7.ibsrv.net/gimg/acurazi...97a22ef76.jpeg |
Originally Posted by Sheefo2k
(Post 16390396)
Best thing ever! I did the same exact thing earlier in the fall. Did your sound quality REALLY improve too? or my mind playing tricks on me?
|
Originally Posted by jobata23
(Post 16293365)
Finally, I had the time to install The rear JDM bumper and lip Also I installed the greddy CBE. Next week I will be installing my Takeda CAI and the CTE supercharger.. stay tune!! https://cimg7.ibsrv.net/gimg/acurazi...73e5c04e0.jpeg Hey, Jobata, First off, sweet build (my wife won’t let me go that far). Second, I’m curious to know where you picked up the replacement impact bar? I just did my rear bumper swap and had to remove the stock one for proper fitment. Anyhoo, that’s all I got ✊🏽 |
Originally Posted by geopas1030
(Post 16405295)
Hey, Jobata, First off, sweet build (my wife won’t let me go that far). Second, I’m curious to know where you picked up the replacement impact bar? I just did my rear bumper swap and had to remove the stock one for proper fitment. Anyhoo, that’s all I got ✊🏽
|
Originally Posted by jobata23
(Post 16405640)
thanks man, I guess I’m one of the lucky few who gets an approval from the wifey! But I bought my JDM rear bumper as a kit and it included the rear beam, and I got it from Heeltoe automotive
|
|
Dang!! I love me some CW2, but wow! Keep up the good work!
|
This. Is. Awesome.
|
Thanks for the support ppl! and I will be getting another tune this week and
I will be installing these: •ZDX throttle body with PRL adapter •1000cc injectors •Fuel Pump https://cimg9.ibsrv.net/gimg/acurazi...905b52591.jpeg https://cimg2.ibsrv.net/gimg/acurazi...416b6fe81.jpeg https://cimg0.ibsrv.net/gimg/acurazi...9f1efa0a9.jpeg https://cimg3.ibsrv.net/gimg/acurazi...c50984f4e.jpeg |
I got the car tuned last weekend and the car almost made 320 whp and 251 torque with current condition, and I achieved my 300 whp goal for the car
https://cimg8.ibsrv.net/gimg/acurazi...7a1e8a72e.jpeg https://cimg2.ibsrv.net/gimg/acurazi...38f8ae2ff.jpeg |
Originally Posted by jobata23
(Post 16434570)
I got the car tuned last weekend and the car almost made 320 whp and 251 torque with current condition, and I achieved my 300 whp goal for the car
https://cimg8.ibsrv.net/gimg/acurazi...7a1e8a72e.jpeg https://cimg2.ibsrv.net/gimg/acurazi...38f8ae2ff.jpeg |
Originally Posted by Eroc_CW2
(Post 16441402)
Those are some great numbers man! Car is turning out great!
|
Originally Posted by jobata23
(Post 16441710)
Thanks man, btw did you install the supercharger yet? The last time I spoke to you I believe in Instagram
|
I wrapped the grille and blacked out chrome trim on the doors and handles, and also new wheels will be mounted soon!
https://cimg7.ibsrv.net/gimg/acurazi...78ee0ca16.jpeg https://cimg6.ibsrv.net/gimg/acurazi...fcebd0692.jpeg |
I finally the new wheels are on and I like this more than my previous set.
https://cimg1.ibsrv.net/gimg/acurazi...9df1fe41f.jpeg https://cimg2.ibsrv.net/gimg/acurazi...29e444cb6.jpeg https://cimg3.ibsrv.net/gimg/acurazi...7c82e7f18.jpeg |
Looks good
wheel and tire specs? |
Originally Posted by 2012wagon
(Post 16449652)
Looks good
wheel and tire specs? |
|
Looking good man. Any modifications to run this setup, camber, roll, etc?
|
Thank you, well my front fenders are Rolled and slightly pulled and The rear fenders are rolled Only. The Front Has a natural camber of -1 and the rear is set to factory specs of -1 camber and toe is zero all around. Also I added a 5mm spacers on the rear to make it flush with fender and lowered the car a little bit more. Here are a few recent pictures of the car with my final adjustment.
https://cimg0.ibsrv.net/gimg/acurazi...5057b1f8d.jpeg https://cimg4.ibsrv.net/gimg/acurazi...7a6e19d3b.jpeg https://cimg3.ibsrv.net/gimg/acurazi...d3e1e1d07.jpeg |
that sits beautifully!
|
Super sick!!!
[QUOTE=jobata23;16450172]https://cimg0.ibsrv.net/gimg/acurazi...fa0354144.jpeg https://cimg9.ibsrv.net/gimg/acurazi...32211f134.jpeg[/ |
Hey man, looking good.
Just ordered a similar wheel setup. You mind posting some pictures to show how much the wheels poke? |
Originally Posted by EuroRspec
(Post 16495391)
Hey man, looking good.
Just ordered a similar wheel setup. You mind posting some pictures to show how much the wheels poke? |
The new stance is perfect. One of the best wagons I have seen.
|
Originally Posted by CCColtsicehockey
(Post 16496630)
The new stance is perfect. One of the best wagons I have seen.
https://cimg2.ibsrv.net/gimg/acurazi...4afde9651.jpeg https://cimg3.ibsrv.net/gimg/acurazi...58c1dcec3.jpeg |
|
:toocool:
|
Car looks great!! Good job and good numbers too
|
Looking good. In regards to the double din, what happens to the oem display at the dop of the dash?
|
Originally Posted by EuroRspec
(Post 16592870)
Looking good. In regards to the double din, what happens to the oem display at the dop of the dash?
|
Very nice job. Did the JDM rear help with the clearance issue USDM wagon's have with sedan exhausts?
|
Originally Posted by Tourian
(Post 16637081)
Very nice job. Did the JDM rear help with the clearance issue USDM wagon's have with sedan exhausts?
|
Originally Posted by jobata23
(Post 16639285)
thanks but The Greddy CBE exhaust never had a clearance issue, The USDM Wagon bumper sticks out more and So the exhaust tips was tucked in more.
|
Originally Posted by jobata23
(Post 16592718)
New summer wheels and double din on finally!
https://cimg1.ibsrv.net/gimg/acurazi...c815f8874.jpeg https://cimg5.ibsrv.net/gimg/acurazi...f1204d526.jpeg https://cimg8.ibsrv.net/gimg/acurazi...277ff2801.jpeg https://cimg1.ibsrv.net/gimg/acurazi...632f9e88b.jpeg https://cimg2.ibsrv.net/gimg/acurazi...29fcc718a.jpeg https://cimg3.ibsrv.net/gimg/acurazi...478f9c6cb.jpeg https://cimg4.ibsrv.net/gimg/acurazi...47dd9f6b8.jpeg @cu2wagon dust off that parts pile under your bed! |
Hey i've been searching for that JDM bumper you have but I'm having a hard time finding it, do you maybe have a part number or website??
|
Originally Posted by SaffronSpaceCowboy
(Post 16689298)
Hey i've been searching for that JDM bumper you have but I'm having a hard time finding it, do you maybe have a part number or website??
|
All times are GMT -5. The time now is 05:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands