JGarcias PWP
The following users liked this post:
jeroplex (10-26-2011)
#43
Burning Brakes
which brand did you go with? or are those real BBS? i almost went with the same style wheel but went with the privat since they have more curve and not as flat. cant wait to see them on your car
#44
Instructor
Thread Starter
i wish they were real. i cant afford legit bbs lm's* at the moment. i got them off ebay from 323 motorsports.
#46
Drifting
#47
Instructor
Thread Starter
venting...
its taking me forever to put these on! 323motorsports sent me the staggered setup even tho i requested all 4 to be 8.5 wide. so i said fuck it, ill go w/ a staggered setup. so i order my luggies from wheeldude and they ended up in jersey. i know this because the guy who recvd them called me to see if i had his lugs...i didnt. so i called both places friday and both were going to the sema show and i had to wait. FUCK!!! Luckily both places call me today to make it right. So i have to wait another week or so. straight torture...
The following users liked this post:
VortexBlueTSX (11-09-2011)
#55
Instructor
Thread Starter
first off...mad props/respect to you for being the first person on this forum to have lm wheels. i have not seen anyone else w/ these unless they are the privat* brand...and to me those are not reps, they are curved and shit...
as far as originality...i dont want the sports kit, i dont want to have a black grille, i dont want a roof rack, i am not going to clear my headlights...what im trying to say is just because i decided on these wheels does not mean i want my car to look like yours. you did a great job with your ride, im going to do what i want with mine.
The following users liked this post:
ssjoeboe9 (11-08-2011)
#56
Burning Brakes
Hey i dont know if you got tires yet...but if you are looking for a dedicated summer tire i have the Falken 452 and i cant say anything bad about them these tires are unreal! Looking good man
#57
Instructor
Thread Starter
#58
Burning Brakes
new new new, i got them when i purchased my wheels....http://www.falkentire.com/Tires/FK-452-3 great tire!
#60
Instructor
Thread Starter
new new new, i got them when i purchased my wheels....http://www.falkentire.com/Tires/FK-452-3 great tire!
#63
Instructor
Thread Starter
LM reps are 19x8.5 +35 all the way around. falken 452s are 245/35/19.
figured i could take time out from saving endangered animals to update my thread. i am not sure i like these in person, imo they look better than the car does. my fronts poke out about 1 or 2 mm and my rear is kinda flush. i think ill rock these for a month or two then go to another set.
future plans:
side markers w/ switchbacks (HAS THIS BEEN DONE ON A 2g TSX?) any pics if so?
coils - this is first!!!
rear lip and roof spoilers
type s front lip
euro grille
aero skirts and rear bumper
previously i said i didnt want to remove my amber signals but now that depo has headlights ill get them. my camber kit has held up nice and ive got adjustable ball joints for the front coming in the mail soon. once again props to azine!!!
figured i could take time out from saving endangered animals to update my thread. i am not sure i like these in person, imo they look better than the car does. my fronts poke out about 1 or 2 mm and my rear is kinda flush. i think ill rock these for a month or two then go to another set.
future plans:
side markers w/ switchbacks (HAS THIS BEEN DONE ON A 2g TSX?) any pics if so?
coils - this is first!!!
rear lip and roof spoilers
type s front lip
euro grille
aero skirts and rear bumper
previously i said i didnt want to remove my amber signals but now that depo has headlights ill get them. my camber kit has held up nice and ive got adjustable ball joints for the front coming in the mail soon. once again props to azine!!!
#65
Instructor
Thread Starter
2 bjs
i finally got around to installing the spc ball joints for the front. this was first time ive installed ball joints and it was no joke. the ball joint press is scarier than the spring compressor. it was tuff getting the old ones off.
sorry, but i dont have good before/after pics...before (the day i got my wheels on)
Attachment 116087
after...
i like the results so far. i have an alignment scheduled tomorrow and then i get to test them out by going to san diego this wknd.
i do have a problem i cant figure out tho. i set both to get -1.5 and my passenger side does not go as far in as the drivers side...any ideas as to why? i have the passenger side set as negative as possible and it still sticks out further than my driver side. drive side is about halfway. my friend seems to think that one of the wheels may be a different offset. i was gonna rotate them when i get back from the alignment shop to see if thats the case. thx for looking!
sorry, but i dont have good before/after pics...before (the day i got my wheels on)
Attachment 116087
after...
i like the results so far. i have an alignment scheduled tomorrow and then i get to test them out by going to san diego this wknd.
i do have a problem i cant figure out tho. i set both to get -1.5 and my passenger side does not go as far in as the drivers side...any ideas as to why? i have the passenger side set as negative as possible and it still sticks out further than my driver side. drive side is about halfway. my friend seems to think that one of the wheels may be a different offset. i was gonna rotate them when i get back from the alignment shop to see if thats the case. thx for looking!
#69
Nice job! Glad to see they went on. Might have to look into this.
The unevenness might also be because you adjusted the bjs without touching the toe? Just a guess. Let the alignment shop do the fine tuning and then figure it out. I just got my spacers installed. Man what a difference 10mms can make.
The unevenness might also be because you adjusted the bjs without touching the toe? Just a guess. Let the alignment shop do the fine tuning and then figure it out. I just got my spacers installed. Man what a difference 10mms can make.
#70
Instructor
Thread Starter
Nice job! Glad to see they went on. Might have to look into this.
The unevenness might also be because you adjusted the bjs without touching the toe? Just a guess. Let the alignment shop do the fine tuning and then figure it out. I just got my spacers installed. Man what a difference 10mms can make.
The unevenness might also be because you adjusted the bjs without touching the toe? Just a guess. Let the alignment shop do the fine tuning and then figure it out. I just got my spacers installed. Man what a difference 10mms can make.
Thread
Thread Starter
Forum
Replies
Last Post