zup2sky

Any pics? Hows carplay on NEX?

ironichaos

I will try to get some pictures today. As for carplay, I haven't gone to the apple store to get the cables yet. My only complaint is that the stock USB no longer even supplies power which is annoying because I thought that I would have the ability to charge to USB devices at once, but oh well it is a small price to pay. I will try to go get the carplay cables today and install the new firmware too and test it out.

ironichaos

I just realized that I do not need the HDMI to lightning for carplay I am doing the update now and will report back soon!

vandeec5

I've been having problems installing the Pac Swi-RC onto my TSX. Does it tap into the Pink of the radio harness? I swore when I looked at it, it wasn't pink.... #16 correct? Please confirm.

ironichaos

Not sure I used the idatalink Maestro much easier as all you have to do is log into the website and it programs it for you. As for the colors of pins I connected to, I think I spliced into a brown pin and a pinkish/red pin. Not 100% on that though. http://puu.sh/dP731/fae84aeeed.png Here is the wiring diagram idatalink gives you. Note that I did not hook up the bluetooth wire as it said it was under the glove box. My unit auto pairs anyways so there was no need to hook that part up.

D4nnyD

its actualy 2 wires. I had the same confusion before. its #16 and another. read the instructions on the pac site again.

EDIT:

"Connect the INTERFACE's white wires to Pin16 (Pink) of the above connector. Connect pin 5 (Brown, Yellow or Orange) to chassis ground."

cano1098

Hello I really want to do this enmi acura but I have some questions I hope you can answer me:

1- what is the information that stays on the screen stock?

2- the stock auxiliary an usb still work?

3- the steering wheel audio controls still work with the new stereo?

4- what features or things whatever they lost the car after the process?

thaaaanks

lucweezy

Help help im having problem with the white wires,

Chris.db

Great build !

Kedd22

I am about do a Head unit (Pioneer AVH-4100NEX) install in about a week, I was wondering how to keep my factory usb and aux in my center console. Is there like a adapter I can buy or any other method of keeping it intergrated to my 4100NEX?

Thanks alot!