Hey guys i just bought me a set of vette sawblades and i know there 5x120 and i will need adapters but i was up late last night and i couldnt find anything on this can someone please help and what do you guys think of this wheel option ?

Hey guys i just got a set of sawblades and i know ill need a adapter to run them but thats the problem i cant find them for cheap i need your help please. Also will i need to do anything else or that will be all i need please lmk .

On the TL? All depends on what year and size you get. What do you need help on? The adapter size?

I have the 17inch set but all i know is that there 5x120 and my car aint lol so can someone please help in finding out if i need more than just adapters and where can i find some cheap ones

front: 17x8.5 +56
rear: 17x9.5 +56

you can get 5x114.3 to 5x120 adapters on ebay. that would be the cheapest place. because of that offset though, you would need the adapter to be at least 35mm in the front and 30mm in the rear to be flush.

ok so tomorrow im going to get my new tires what size should i go with on the sawblades there 17x8.5 F & 17x9.5 R they've told me 205/40/17 F and 215/40/17 can anyone please help before tomorrow

205 and 215 will give a stretch, if that's the look your going for (going by your name, I'm assuming it is) then that should be fine. If not, I believe standard size for 8.5 is 245 and for 9.5; 265. I could be wrong.

Tire size depends on your offset and how low you are. First, did you get the proper adapters to run these corvette wheels? If so, how big are the adapters?

guys thanks alot for all the help yes i did get my adapters and i already got my tires yesturday i went with 205 upfront and 215 in the rears can i upload pics from my iphone ? so you guys can tell me what you think

i usually share my phone photos with the photobucket app for android. then i just copy the img link and post. iphone is probably similar method.