***Upper Control Arms/Shock Tower HELP***
#1
***Upper Control Arms/Shock Tower HELP***
I have recently changed my upper control arm ball joints bc the old ones were looking a little old and in rough shape. I had adjustable ball joints on the old set-up the new joints dont let me adjust the camber as much only +/-1.5 im still running a -2.5 in the front as to before i ran -.5 in the front camber. the problem now is that my UCA's hit the shock tower really bad on really small bumps. Before it really didnt do it as much. Would this be because the camber is so much off any help would be great. i ordered new control arms with a adj. ball joint that goes to +/- 4 degrees. thanks guys
Thread
Thread Starter
Forum
Replies
Last Post
adreano17
3G TL Tires, Wheels & Suspension
2
09-29-2015 08:48 AM