fixedtl

OK i know most of you dislike my car and i'm gonna get flamed for this but here it is anyway
here an old front end

New pics

yunginTL

that is some crazy different shit man, how u get the front end like that? custom?

fixedtl

custom , and the flares are wraped in silver carbon ,and the front is black and silver carbon.

yunginTL

how much all the bodywork cost and what kind of air ride?

Inspire

Definitely not my style, but give you props for having the balls to do all that crazy cuttn'. The Job don't look bad at all either... at least from these photos I can't tell...

fixedtl

The rear and side was from the first custom job the cost of the first kit was 3gs, everything else like the new front, flares i did myself, and wraped it myself. As for air i have Smc its a brand they are well know and good quailty if you dont want to spend alot.

REV-01

you wheels are kinda weak with those flares, get something wider

shimbo519

If anything, mold the front fenders into the front bodykit and the same for the rear. The lines just dont seem to flow. Also, is there a way to align the front bodykit better? It looks like it's pointing down.

@cUr@-TL

not my cup of tea, but props to you for having the balls to do that...

IMO, if the kit was completly molded it would look/flow at lot better.. and wider wheels would fit better...

Bareback

the skirts don't blend in at all - not a good seam, the wheels look too small. Overall it looks like yu got the job done at a high school mech. class. It needs to be cleaned up, removing those bumps in the skirts and aligning them and repainting all of them. The back end? what the hell is that? It looks horrible, you just forgot about it?

Looks like a Michael Jackson after all those surgeries and they forgot to put his nose back on.

TLofNYC

2 fast 2 furious.....

mezzerTL-S

nice rims

car_lost

are you done?

the front lip needs more work. doesnt look like it fits right and the flares dont look that great either.

LatinSmoke 01CL

Definitely different. You wont see another TL like that on the street

TLEXTREME

props for effort--not my style personally but i thing the only thing left you can do is throw some stickers on it to increase HP.--lol

TightTL

I almost threw up my lunch. Sorry man.

Dreamdtt2000

I think if you mold the front/back and fenders cleanly it would look good. Right now it looks messy. I don't like the side skirts though. Your back plates looks so sloppy.

Dreamdtt2000

Where did get the carbon fiber hood from?

snowman81

Not my style...cleaining up the seams all the way around would help it flow a little better. I don't think the body kit goes well with the lines of the car anyway. Can you do something different with the rear license plate? Just looks like it got stuck there. I wouldn't ever do that to my car, but if that's your style then nice job.

alpswd

What is that shit holding your license plate to the rear bumper? Clay?

brianlin87

iTrader: (1)

your wheels look bad cuz of those flares, get something MUCH wider

bkzjimmy

kinda looks like u found a bunch of different pieces of bodykits and put it on ur car.....it looked better b4

ryguyGTSK

how much was your air ride and install?? is it just front and back..??

benzo555

omfg.. no comment..

dark inspire

props for creativity but im not feelin' it at all. Do you do the work yourself?

SiCrew

props on the custom bodywork, and i like how the rear fender flares also have a flare piece on the door, its a nice look...peace

AsianRage

You need to mold the kit and smoothen it out alot. It's so ghetto looking now and it has soooo much potential.

fixedtl

Yes i know i should mold the flares in. The reason for not molding is this is my daily driver and since i have air ride it has lots of body flex, the flare will crack sooner or later. Even if the flare were molded right it will still give out. I have seen it crack on friends cars. The front but dont line up is because it made out of polyurathane and poly dont work well with fiber glass and bondo, it too flex and the glass and bondo will not hold i have tryed.

fixedtl

I can do front , back , side to side , all up. i have 10 switches the air ride cost a lil less the 3gs they had to make custom brackets for it

***EL*MAFIOSO***

props on individuality and not carin' what anyone else thinks bout your ride
personally i guess the only pic i like is your avatar
and i guess some advice besides molding all that stuff and makin it flow would be to get wider rims with fatter lips, you got those huge flares on em man, use em!
anyway, i hope you keep workin on it and i'd love to see how it'll look or what you'll do next.
good luck bro

fixedtl

THANKS BRO AND YEA I WILL BE GETTING SOME WIDER RIMS FOR IT TO LINE UP WITH THE FLARES

njzprettyboy

whens the new kit coming :shhhh:

NYZGREATST

the car looks like parts were just carelessly thrown onto it. nothing works. it really makes that red car with the sarona kit looks sickk, and every1 know how i feel bout that kit

Phrosttz0

Why would you ever do something like that to TL, maybe a civic would have been a better choice to do that to

mr.motoring

Referring to the pictures on the right... I didn't know they make miniature TL RC cars?!!!

***EL*MAFIOSO***

WHERE?? HOW MUCH?? I WANT 3!!!


















oh, you're

leeherman

Looks like the car was parked next to a J.C. Whitney warehouse that exploded.

Sorry man...

***EL*MAFIOSO***

sorry, wtf iz jcwhitney?

ndawood

Its a little over the top for me but props for doing something like this.

leeherman

They sell a LOT of tacky add on crap.

http://www.jcwhitney.com/autoparts/S...-10101/s-10101

Have you ever wanted to add a lighted hood ornament to your TL (I hope not)? They have it. Cheesey "bumper protecting" moldings? Yep, got 'em. Leopard skin seat covers? That too.

Regards,