Fun with sandpaper...
#46
I know I am bumping an old thread. I have done this on a few cars. Best bet is to brush or spray on a clearcoat:mineral spirits 50:50 mix to protect the lens. This will last far longer than any uv sealant. You can put the sealant or wax after the clear coat.
#47
#48
Thanks for the comment's.
1st. 1500 grit- 10 minutes wet sanding
2nd. 2000 grit- 20 minutes wet sanding
(after the sanding you wont be able to see through the light at all, so dont worry)
3rd. 3M rubbing compound (rub it in hard, or use a buffer)
4th. Meg's Polish
5th. Meg's carnuba wax
You could start with 1000, 1500, then 2000 grit if the headlights have severe scratches or haze.
When I said oxidation I ment a haze that can be seen and felt.
1st. 1500 grit- 10 minutes wet sanding
2nd. 2000 grit- 20 minutes wet sanding
(after the sanding you wont be able to see through the light at all, so dont worry)
3rd. 3M rubbing compound (rub it in hard, or use a buffer)
4th. Meg's Polish
5th. Meg's carnuba wax
You could start with 1000, 1500, then 2000 grit if the headlights have severe scratches or haze.
When I said oxidation I ment a haze that can be seen and felt.
Thread
Thread Starter
Forum
Replies
Last Post
IIDXholic
3G RLX (2013+)
23
10-19-2015 09:40 PM
Sarlacc
Console & Computer Gaming
5
09-30-2015 02:15 PM