aaronnn

LED interior.. a few new ideas that was put in. unfinished for now, still working on the dash and center console. will be updated in the upcoming weeks

enough talk here's the pics.


If you look closely into the cointray, there's a white LED in there also. My MP3 player is connected to the blitzsafe adapter that is hidden away through the back.


lighting in the cupholders. its pointed straight to the headunit. it helps shine the center console nicer.


When the cointray is closed, it hides away my mp3player, revealing the LED'ed butt warmers and my Amp controller for the extra bass boost (which came with the LED already in it).


love the look with a water bottle in the cupholder! lights the whole bottle up


different angle


map light


here you can see the custom work done for the LED's in the map light


LED's lit up without the cover


LED close up


Close up, different angle


what y'all think?

more LED's still in the works. i have the Dome light done too, but it looks the same as the map lights so didnt really bother taking pics of that. i also have it done in the glove compartment, AC vents, and Glove compartment..

will update again soon

oVerBoost

wow! nice work, especially on the shifter gate. Is that a cf trim around the shifter? where'd you get that form?

pughater

thats nice

aaronnn

thanks.

the cf collar trim was from a member on this board. it was off a CL and i just bought it off him on the private sales section of AZ.

NYZGREATST

dawg, would you be willing to make me a set for my car? i bought a set off ebay but they give off more of a blue/purple hue, which is a little harsh on my eyes.

aaronnn

if you want it done, the car has to be here because this isnt a simple plug and play thing. you have to remember that the bulbs you buy off ebay are just LEDs plugged into a bulb that fits into your stock sockets.. but these, you have to solder directly into the wires. basicly pulling the whole harness out and just using the wires..

it can definitly be done, but it woud mean, it'll take the same amount of time to go back to stock. although, real LED's connected properly is so much nicer than cheap knockoff LED's sold on ebay, pepboys, autozone, ricer stores, etc...

TL_Fo_Life

First of all, YOU ARE THE MAN! Very nice mod. I wanna be the first one to request a DIY from you, for the shifter lights. Can you post a pic of the shift gate without the covers, so we can see whats doin' under there.

NYZGREATST

yikesss. hmm, possible to do a DIY for me? your right, the ebay led's are such crap. im about to go back to my stock bulbs.

z3Ro

for the cupholder idea...the best is if u put 1 led in the middle of the individual cupholders...drille a hole there...n it lites up even brighter with bottles...ive done this with just an led taped on the bottom of a bottle...should try it...

TranceFusion

very nice!

VoLLy

iTrader: (8)

The shift plate lights are hott!

aaronnn

i thought of that too, but what i was trying to do is do something like the MDX. if you ever been in one, it has a light that shoots from the top of the car, where the sunglass holder is and lights up the whole center console. i wanted to have that same look, except i didnt do it from the top, i did it from the cupholders. and yes i achieved my goal of having it light the center console. its just that i noticed it work as a bottle lighter too, but that wasnt really my main goal..

for a DIY, i could work on that later after work.. but there will be alot of money spending to do this project. first you'll need a really good set of individual LED's, remember to buy bundles. voltage regulators, resistors, diodes, circuit boards, extra wiring, solder/soldering wire, and massive amounts of patience. because all these electical parts are REALLY small, it'll be a REAL pain if you have big fingers. i'll try to get pics and everything of how it looks behind these beautiful lighting when i get a chance afterwork.


thanks for the compliments guys. i cant wait myself to get the whole interior done. that's gonna be a challenge, but will be done soon. just kinda getting hard to do since its so cold out and i cant stop my hands from shaking so much. its not an in-house project, you need a power source and you have to be right by the car the whole time to get things connected properly.

SiCrew

looks awesome, very nice job!

theshrink

i think superfluxes would be better than those 3mm... take that back... i KNOW ... nevertheless nice...

whatwasthat

damn, i want to do tihs.

btw, what's the word on your Headlights? sold those projectors yet?

varunverma23

do you have a ! and ? for your sportshift? haha

looks good.

AZN.M3NACE

*jealous* now i wanna do this...

aaronnn

i know superfluxes are definitly awesome. BUT its hard to use those in the way i put mine in. i definitly considered it, but then again, it requires more work and money.

aaronnn

i havent sold the headlights yet, but im gonna be working on my new set after the winter. its too cold right now to do anything. if you still want it by then, i can just give it to you. all i really want is the money i paid for the projectors and shipping. so let's just say 100 bucks plus shipping and its all yours (for both sides)

aaronnn

more pics:


inside armrest console.


a closer look to the LED's and the complicated wiring inside of the armrest console.


glove compartment lighting


closer look into the glovebox lighting


center dome light


8 pieces of LED's equally distanced throughout the space in the dome light


LED's inside the AC Vents for the rear seats. it actually lights the leg and seating area of the rear so people in the back has some lighting too.


sneak preview of my experiments for the center console.

the whole center console will be updated soon. keep checking!!

-Rz-UA5

the shift gate is SWEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEET
props up bro, I wish i have the tools and knowledge..
keep us updated man

nguyen

straight up ganster man

PenancE

that is fuckin hot\


PLEASE MAKE A DIY FOR THE SHIFT LIGHTS, I SO WANNA DO THAT TOO, ALONG WIT THE DASH!!!

Da_iLLeZt_TL973

wow aaron your back at it again man.....i have some led's in my front air vents i havent gotten around to the back yet i cant wait to see this in person......so ummmm when can we meet up so i can check this out man???....if u dont mind give me a call so we can talk about this lol hot shit i really wanna do my shift gate give me a call!!

Jputt

Alot of work but not a bad result.

aaronnn

haha yeah. gotta keep modding and catching up to these new cars coming out. we'll definitly meet up again soon, maybe you should come swing by to the GSP meeting this sunday.

check the Acurazine meets sections guys. for those in NJ and local to the area, should stop by and check out the LED's in person if you want