Slepybear

Alright, I have searched, looked around, and checked the owners manuel, but i can't find the sizes of the bulbs to replace
-Dome lights
-Courtesy (door) lights
-Map lights


Can someone tell me the sizes of each and how many to get etc.
or point me in the direction of a good online store to get them? I need them in green.

azn_xxxd

Im assum ur having 99 Tl right ok here some specs

1999 ACURA TL

Low beam headlamp
HID-D2R

High beam headlamp
9005
9005SU Silverstar ULTRA for Ultra Night Vision - The Whitest and Brightest Halogen
9005ST Silverstar High Performance Lighting: The Whiter and Brighter Halogen
9005XV XtraVision Halogen - The Brighter Light
9005CB Cool Blue Halogen - The Whiter Light

Parking light
1157A
1157AST Silverstar Signal Lighting: Complete the Look: Crisp, Clean, Style
1157ALL Long Life Upgrade: Up to twice the life of the standard lamp

Front turn signal
1157A
1157AST Silverstar Signal Lighting: Complete the Look: Crisp, Clean, Style
1157ALL Long Life Upgrade: Up to twice the life of the standard lamp

Rear turn signal
7440

Tail light
7443

Stop light
7443

High mount stop light
7440

License plate
168
168LL Long Life Upgrade: Up to twice the life of the standard lamp

Back up light
921
921LL Long Life Upgrade: Up to twice the life of the standard lamp

Front sidemarker
1157A
1157AST Silverstar Signal Lighting: Complete the Look: Crisp, Clean, Style
1157ALL Long Life Upgrade: Up to twice the life of the standard lamp

Map light
168
168LL Long Life Upgrade: Up to twice the life of the standard lamp

Dome light
DE3175

Step/Courtesy light
158

Trunk/Cargo area
168
168LL Long Life Upgrade: Up to twice the life of the standard lamp


Or go here to check it out
http://www.sylvania.com/ConsumerProd...lacementGuide/

VoLLy

iTrader: (8)

168/194 will work for both map and door lights. You need a 39mm long festoon bulb for the dome.

starstruckTL

are all Sylvania Bulbs l.e.d.??

VoLLy

iTrader: (8)

no, none of them are. Sylvania's are all filament bulbs.

Slepybear

thanks

starstruckTL

what brand is l.e.d.? n how did you remove the covers? im scared that i might break them if i use a screw driver or something

TequiLa

iTrader: (3)

ermm I measuered it earlier today and it was 36mm

VoLLy

iTrader: (8)

I found 36mm too short, so just to be safe i bought the 39mm and it fit my sockets.

jwskier187

theres a really good website that just hooks you up with the right size and everything. forgot the name but i bought from them and they just gave me the right size after i told them my model of my car.

6MTUA5

iTrader: (2)

No way!!! azn_xxx made a useful post

JCharged

iTrader: (5)

^ lol.

02type-s

L.E.D stands for Light Emiting Diode. Its not a brand, its a type of bulb. Brighter, sharper, energy efficient, and lasts a LOT longer.

Example- ever seen the way the tail lights on the newer Caddillacs light up? They are L.E.D.

And to remove the covers, use a very small flathead screwdriver to slowly pry it off in the spot that has a notch to fit it in.

02type-s

Oh, and Slepybear, dont forget your trunk light if you are doing all interior.

I have white led clusters in my license plate light and reverse lights as well as the full interior and I love them!

vivftp

Anyone know what bulb size goes in the glove compartment and the console? Those are the only 2 bulbs I haven't changed yet.

Also, anyone know why the console has a green light? Seems kinda... odd... just to make it a bit different from the rest of my setup, I might like to make the console a nice blue LED

6MTUA5

iTrader: (2)

It's not a green light there's a little filter there that makes it appear green. That little plastic piece above the cigarette lighter/charger spot is what I'm talking about. Here's a view from under the cup holders so you can see where to change the bulb.

vivftp

Thanks for the info... you wouldn't happen to know the bulb sizes tho... would ya?


BTW, is that the underside of your cupholder? If so, then it's very



Also, this is a bit off topic, but has anyone ever done a cupholder mod? I ask becuase we all know the default cup holders for the back include 1 big and 1 small... any way to make both big? Or change it up into a new design?

Razzi

i have a 99 so the stock cupholder was just absolutely horrid. friend of mine picked up some holders from an 02-03. all you have to do is sand down a few tabs, takes like 2 mins maybe, definitely nowhere near as bad as it sounds. and it slides right in, now my drinks stick it like duct tape

SmokedTLS

superlumination.com has sizes and colors, got everything for my dome lights to door lights to signals and reverse lights. EVERYTHING