What could it be?

Thread Tools
 
Search this Thread
 
Old 04-30-2010 | 08:53 AM
  #1  
Sun1914's Avatar
Thread Starter
Advanced
iTrader: (1)
 
Joined: Mar 2009
Posts: 96
Likes: 0
From: Yonkers, New York
What could it be?

Hey guys I'm hoping some one has an answer to my question...

So, I've changed my stock sways to used comptech (F&R) I also changed the springs to a set of used Eibach Springs and new Tokico shocks.

but my suspension still feels suspect. The first day everything felt great but now it feels loose and I'm getting a rattling sound from the rear. A buddy says it may be the bushings gone bad...I just wanted to get a 2nd op....

If it is the bushings does anyone know how many bushings are needed to change them all?

All info, comments, suggestions welcomed...thanks guys

Last edited by Sun1914; 04-30-2010 at 08:54 AM. Reason: mispelling
Old 04-30-2010 | 09:12 AM
  #2  
MurdaZ's Avatar
Three Wheelin'
iTrader: (1)
 
Joined: Apr 2007
Posts: 1,862
Likes: 3
what endlinks did u use, did u reuse the oem ones? go under the car and give each end a good wiggle and see if u hear any binding or what,
Old 04-30-2010 | 09:34 AM
  #3  
Sun1914's Avatar
Thread Starter
Advanced
iTrader: (1)
 
Joined: Mar 2009
Posts: 96
Likes: 0
From: Yonkers, New York
Originally Posted by MurdaZ
what endlinks did u use, did u reuse the oem ones? go under the car and give each end a good wiggle and see if u hear any binding or what,
I bought brand new Moogs.
Old 04-30-2010 | 11:38 AM
  #4  
hANDYcaptd's Avatar
It's the Halladay season!
iTrader: (5)
 
Joined: Mar 2008
Posts: 4,533
Likes: 110
From: Philly, PA
I don't think bushings would make a rattling noise. I would check ALL the bolt for tight and correct torque specs.
Old 04-30-2010 | 12:41 PM
  #5  
01tl4tl's Avatar
Team Owner
 
Joined: Sep 2006
Posts: 33,535
Likes: 1,137
did the correct springs go on front and back?? - its happened before that they got swapped--ooops




All times are GMT -5. The time now is 07:21 PM.