rondog

iTrader: (1)

With demand present for an affordable body enhancement for the 2G Acura TL, we decided to go ahead with the 2nd Generation Acura TL splitter kit from RonJon Sport Design.

Our goal is to provide the best quality possible for the fairest price and the most attractive design with board member's direct feedback, so you know it won't be a compromise. With dozens of designs and 4 production kits built to date, our experience will be on display as we engineer the best possible installation techniques in the industry. They will be problem free and secure.

Here's more information…


5-piece kit is made up of:

• Front lip add-on (primed ABS plastic)
• Pair of side skirt add-ons (primed ABS plastic)
• 3 piece rear lip add-ons(primed ABS plastic)
• Hardware and 3M double sided tape included
• Exterior RonJon vehicle emblem and catalog

The design has fairly simple yet noticeable, the kit will bolt right up, conforming to the profile of the car from underneath. Here are the illustrations our in-house design studio (made up of Rondy Marji and John Vicente of http://jmvdesign.ca/) has come up with:

(click images below to enlarge)









Pricing Breakdown:
(limited to first 15 kits)
Schedule:

• We start on Friday, March. 3rd.
• Prototyping ends on March. 25th
• Production begins on March. 29th.
• First articles begin to ship out on April 20th.

Consumer Notes:

• Pre-order pricing limited to first 15 kits, $200 deposit required
• The pieces to the kit come unfolded with hardware included
• General UPS ground shipping rates vary from $80 to $150 depending on location
• No modifications to the kit or vehicle are needed for installation
• Professional installation is suggested
• Front lip, sides and rear parts are made from OEM quality ABS Plastic
• Lowers ground clearance by approximately 2.0" all around visually improving the vehicle stance
• Painted option is considered special order and is non-refundable
• Painted option requires 30 day turn around time or less
• Painted option color accuracy cannot be guaranteed without actual vehicle present
• Can be installed as prepped and primed matte black, paint is optional
• We accept PayPal or credit card over the phone.

Additional notes:

• We will be photographing our progress every step of the way as we post the images on our web page seen here:
  http://www.ronjonsportdesign.com/2g_tl_kit.html , on our Facebook fan page seen here: http://www.facebook.com/ronjonsportdesign as well as this thread.
• Call us for any other needed information or to order!

Here's the first picture of the bumper in the studio with fiberglass profile splashes of the 2003 Acura TL bumpers:

lokee99

iTrader: (3)

I am in for an unpainted version. What is your paypal?

rondog

iTrader: (1)

pm sent.

03tLsNBP

iTrader: (9)

when i click on the pictures it shows me an enlarged photo of the 4G kit.

rondog

iTrader: (1)

Whoops, try these previews, if a mod can help, I'd appreciate it...

lokee99

iTrader: (3)

Payment sent. When I click on the photos it just shows me the same picture same size. Do you have any pics with it actually on the car? Oh and you wouldnt happen to have one of those rims sales like before would you ???? lol.. I am still mad i didnt get those 19" chrome inspyres!!!! None the less I am looking forward to the roof and trunk spoiler.


the new pics work

rondog

iTrader: (1)

click above or just click here:

http://www.ronjonsportdesign.com/2g_tl_kit.html

as far as the wheels, email me, I can offer you a discount depending on a few things...
info@ronjonwheels.com


BTW, got your payment, thank you. A receipt is coming your way.

swllen_cu

iTrader: (1)

Man this is a GREAT alternative to the OEM lip kit!!

kidduce

iTrader: (1)

I understand the deposit part. When is the rest due? On day of shipping?

ThreePointTwoTeeEl

iTrader: (1)

The kit looks sick.

rondog

iTrader: (1)

Thanks guys, glad to bring a kit to the market for the 2nd Gen TL guys!

Yes, right before the kit is finished and ready to ship. I'm hustling to finish the 4th Gen Kit so we can start on this kit. Progress pics every step of the way, it will just get better from here on out.

kidduce

iTrader: (1)

Will you be shipping from Ca? If im not mistaken I thought I read you guys were doing this in Socal.

rondog

iTrader: (1)

Yes, from Southgate, remaining kits will be here in NY for stock if there are any left from the first 15.

klectic

Renders look nice. Can't wait to see this installed! Great job in deciding to create a quality kit for the 2Gs!

How low will the kit hang? Not sure if you know what I mean by this, but for example, the WW kit hangs real low making the car look a lot "lower" than it is..

..that rendering want's me to slap on some Legends on my SSM!

rondog

iTrader: (1)

1.5-2.0", we'l see exactly when we build the kit on the car and evaluate what we can get away with. We'll be making the kit have a slight notch in the middle to help with scraping...

klectic

Thanks for the info, just re read the details and saw you stated it there as well, sorry!

kidduce

iTrader: (1)

Ima Get on this list. Just need acouple more days of convincing lol. Damn marriage.

crimsoncyan

what color will the unpainted ones turn out?

InspireUA5

RonJon, nice to see a brand new kit for 2nd gen TL.
I think the lip kit is too thin and small for the TL. I like the design of 3rd and 4th gen TL kit and especially CL kit. If 2nd gen TL kit has a similar one to them then it will be nice!

rondog

iTrader: (1)

Either Matte Black or Grey Primer like these parts in the pic below:





We will make sure it is noticeable, but it was designed to be a lower cost item.

nchand916

Ok I'm a little confused. I have a 00 and the 02-03 frnt is different than 99-01. I heard the uderbody is slightly diff. Example: a 99-01 oem lip front won't fit a 02-03 and vice versa. So id the spiltter kit goin to fit a 00 front. Can I get a guarentee because I don't want to order it and end up not fitting. I know the rear and sides will fit but I'm just concerned about the front

fsttyms1

The lower curve of the bumper is the same, its the contour for the lower grill opening and the way the oem comes up to it thats different. If this mounts to the underside like shown it shouldnt be a problem. We will have to wait and see for it to be made and fit though to be sure.

rondog

iTrader: (1)

Right, we will confirm of course with two cars in the booth when fit check comes around, we'll also be able to make adjustments if needed to accommodate both vehicles, mounting underneath has it's benefits.

InspireUA5

Hi Ron Jon,
would you be interested of making a grille for 02-03 Acura TL? I have been looking for one badly...

here is my quick DIY pic

rondog

iTrader: (1)

We'll see, one thing at a time. On a side note, the 4th Gen TL is already almost up to 15 preorders, the 2nd gen TL is only 2 orders in, we need a few to make sure this will go. The price point of $590 is very affordable, and we will continue to work on the prototype, but if things don't pick up, I will have no choice but to put the project on hold.

For those saying you will hold off until you see the real thing, take a look at out 3G TL kit, and our current 4G TL kit progress, if we are anything, we are accurate and keep true to the design, it will only get better from here, not worse. By the time the kit is made, the pre-order special pricing will no longer be in effect.

nchand916

I will definately order. I'm jus concerned if the frnt will fit or not. My 2000 has its base trim not the optional upgrade type s like lip.

lokee99

iTrader: (3)

They posted this issue up earlier. Since it will be a undermount it shouldnt be a problem but Ron said they would make adjustments if need be. And I am sure that this is going to be done before you get your kit.

lokee99

iTrader: (3)

Looking forward to some pics

swllen_cu

iTrader: (1)

Any progress pics?

randomthought

Payment sent. Can't wait for final product.

03tLsNBP

iTrader: (9)

question.

is there any way we can buy just a single piece of the kit? like just the side skirts, or just the front lip? maybe not now during the preorder, but maybe in the near future?

rondog

iTrader: (1)

Been so busy as of late, we are trying to finish the 4G TL kit then go full steam ahead with this kit. I would still like more preorders, since it is doing ok, but not great. But we need to clean out plate before we get really going with this kit. Parts can be purchased individually, pricing will be established a little later.

Thanks to those who support us and our willingness to start new projects like this.

lokee99

iTrader: (3)

How are you guys as far as the dates goes?

JterrorC

iTrader: (1)

a G for this.....NOT....i dont see the value

TequiLa

iTrader: (3)

... then don't buy it.

Flipster23

iTrader: (15)

ok, its not a G its 590 right now its only a G if u wanted it painted...

JterrorC

iTrader: (1)

im not being a dick...i do have my own opinion tho..and it looks like the homedepot lip... + + ..ye 6!

iamhomersimpson

I just found this kit and think it looks great. Looking at some options to get funds for this kit currently.

Any eta on delivery dates? I know we are still waiting on more to sign up

randomthought

While I don't know what the homedepot kit is, I'd assume it's a simple chunk of rubber bolted to the bottom of the car. Look a little closer and you'll see the subtle deals that makes this a great product at a great price. A "G" is also about the cost of the oem kit painted new, so it's not actually a bad price.

Still eagerly waiting for updates but will be patient for a high quality product.

TequiLa

iTrader: (3)

You do have the right to express your opinion, but in this case you were being a dick for doing so. This is a thread for pre-ordering the kit, not complaining about it.