etxxz

Been waiting SOOOOO frikin long and FINALLY!!
i've had a bunch in the past, but sold all in a-tl just so i could make $75

$135shipped from:
S&J USED AUTO PARTS <-----got bad reputation so beware
40 Excelsior Ave.
Saratoga Springs New York 12866
1-800-456-8144

http://www.acurainspired.com/gallery...6206&uuid=1248

YIPPPA!


now i need the rubber adaptor and a gasket before i can hook this beauty up to my Injen CAI!!




If you're wondering WHY i'm posting this, is because i'm taking a before'n after dyno....<---this is just an excuse for proffesional dynotuning on my vafc

MikePA

OK, time to place ur bets on how much additional hp and torque this results in. Me? I have no idea.

ndawood

should be interesting to see how much extra power you get out of this!!

55M2G7L

let us know how it feels after you put it on

etxxz

I'm just curious on WHERE i'm going to find the red Injen rubber adaptor thingy for my TB-CAI connection.

Will the type-S rubber work? i might just call up injen

fsttyms1

lots of parts stores sell teh silicon hose adapters. i know our auto zones do,

NSXNEXT

iTrader: (2)

Yeah but a 2.75 to 3" is tough to find. AEM makes one but it's pricey.

Edr0e

I almost bought parts off of them S&J auto parts...

Instead I found someone in ohio who said they were willing to ship to cali, and they ended up scamming me for $450 and sending me 2 bounced checks.


APB Auto ( Lisa Smith )
P.O. Box 38416
Olmsted Falls, Ohio 44138

etxxz

wait, the CAI is 2.75in and 64mm is~2.5in...am i right?

Anyhows, i'll be checking with Autozon, auto disc, and so on untill i find it.

I'd want to know though, WILL this be the same rubber used by the Type-S intake? 'cause i need the rubber to be the cool injen red to match my engine bay AND the intake

you can buy from em, they came thru for me...after almost 3 weeks, countless ammount of call and emails. I asked for a refund because nobody responded and so i can in contact with the owner, John. who WILL resolve the thing for you.

call em up, maybe they got (can find) more -S Tbs available.

Faizalstar

go to any home depot or hardware/plumbing store. my first intake never came with one, got it from a plumbing store for a few cents.

NSXNEXT

iTrader: (2)

You all are not getting it. Finding a reducer that goes from 3" to 2.75" is tough. You will never find one at Home Depot (no plumbing O.D. is 2.75") You need to make something yourself or get one from AEM (or maybe another CAI vendor that sells them).

NSXNEXT

iTrader: (2)

I just located one too. I'm picking it up on Monday. And no I checked, he doesn't have any more of them.


Here's a good tip to make sure you're getting a TypeS TB
If the 8th digit in the VIN is a 6, it's a TypeS (CLS or TLS). If it's a 4, it's a CLP/TLP.

ou sig

Injen has alot of parts they sell on their site, they might have one.

http://www.injen.com/hose.html

etxxz

NEW INFO on -S tb locations. Apparently S&J Used Auto parts just takes your money with or WITHOUT having your part and after they have your money, they locate the part. Well, my -S tb came from:
Pam's Auto
7505 Ridgewood rd
Saint Cloud MN 56303
1800 560 7336
www.pamsautosalvage.com
i tried finding a VIN in my -s tb and coulnt find one...where is it?


Oh, apparently my TB came with a TB tower...there are 2 pieces, the whole assembly, with sensors etc and then theres a second part about 2cm thick under it.

Beautifull!! on the overstock section they have a 2.5in x 2in Hose, a 3" x 2" Hose and another 2.75in x 3in Molded Silicone hose
http://injenonline.com/cgi-bin/Merch...ategory_Code=H

whichone is the one i need? consider Intake is 2.75in and type-S TB is 2.5in

NSXNEXT

iTrader: (2)

You won't find the VIN on the TB. You need to ask them what car it came off of. They should be able to provide you with the VIN# for the car.

A while back I got what I thought was a TLS TB a while back and I checked the VIN# and low and behold it was from a TLP.


The hose you need is a 3" to 2.75" coupler.

NSXNEXT

iTrader: (2)

You need this hose.

http://injenonline.com/cgi-bin/Merch...ategory_Code=H

NSXNEXT

iTrader: (2)

Wow, $5.75 part with a $10 shipping charge.

etxxz

haha yeah, funny!! that pieace costs like $3 to ship.

NSXNEXT, broda, you sure i need the 3inch? 'cause 64mm=2.5in (2.54cm~1in)
thx yo!


anyhows, i'm calling injen tomrow morning and talk down that shipping cost...pffff

1st timer

[QUOTE=etxxz]wait, the CAI is 2.75in and 64mm is~2.5in...am i right?

64/25.4=2.51,so yes you are right.

NSXNEXT

iTrader: (2)

I love it when no one believes me. Listen to someone who has done it before.

https://acurazine.com/forums/showthread.php?t=83292

"The TB Bolted right on with no issues at all. What i did for the time being with my intake was i got a 3 inch to 2.75 inch coupling."

subtledreamer

sweeeeeeet, be sure to keep us updated!

jleon2516

Is that first pic of a type s TB? The inlet under the TB opening in a type s is slight bent down and to the side. The one in the TL-P comes straight out with no bends.

etxxz

you da man...quoted from Bigman, corrected i stand.

part ordered and paid for...man dont i love wasting money, the Tl is still gonna take me to school, work and back home

etxxz

I'll be making a dynotunning appointment for Feb 13th...i'd do it next weekend on the 5th but there's a drifting competition i AINT NOT EVAR gonna miss!

i'll keep you ladies posted

NSXNEXT

iTrader: (2)

Just trying to help out the TL brothas.

etxxz

Thanks.


everyone read:
https://acurazine.com/forums/showthr...96#post1127796