NathanJax's 2008 Acura RL build
#41
Matt just offered up his Matte Grafite CV3's in the +35 +42 offsets... if you want them... He's digging the new CVT's in Gloss Grafite...
#42
Racer
Thread Starter
So I got the ProClipUsa phone holder in. It's exactly the holder I wanted, although it sticks out a little further than I want. However, it was $70 and really think it cost about $10 to make, but whatever. Like I said, it was the exact holder I wanted.
Drivers perspective
I also got my trunk mat
I ordered the 09+ swaybar and bushings as well. I'll post comparison pics of the stock 05-08 one compared to the 09+ when I get it swapped out.
.
Drivers perspective
I also got my trunk mat
I ordered the 09+ swaybar and bushings as well. I'll post comparison pics of the stock 05-08 one compared to the 09+ when I get it swapped out.
.
Last edited by NathanJax; 03-07-2015 at 01:29 PM.
#46
Racer
Thread Starter
#48
#49
Racer
Thread Starter
This one goes on the rear. The front you have to drop way too much stuff for it to be worth it.
I grew up at my fathers mechanic shop and have access to it along with lifts/tools/etc.
#50
Senior Moderator
IIRC, there is a big misconception here about what it takes to install the front. I say that because someone came in claiming they had done the front with little more effort than the back, and everyone here was saying you have to remove the engine. Were they full of shit?
#51
Senior Moderator
Along the lines of CV3, but supposedly these are Stance(?).
#52
Racer
Thread Starter
IIRC, there is a big misconception here about what it takes to install the front. I say that because someone came in claiming they had done the front with little more effort than the back, and everyone here was saying you have to remove the engine. Were they full of shit?
My headlights just showed up. Best thing is all the connections are still there, they cut the wiring harness and sent them. So the side marker connector isn't an issue. I also have the ballast and HID bulb on each side...
The following users liked this post:
oo7spy (03-12-2015)
#57
Racer
Thread Starter
#59
Racer
Thread Starter
Thanks. Picking the car up from paint today so I"ll snap a few pics
I got it directly from NavTool. ACURA RL 2005-2008 NAVIGATION VIDEO INTERFACE
Mine was actually on sale down to $170 when I got it.
#60
Racer
Thread Starter
Car is back from paint. I had all 4 new chrome strips replaced on the front/rear bumper, as well as the lower chrome on the front grill, replaced the driver fog light, fixed the rock chips in the front bumper, fixed a couple dings on the drivers side and fix the dings in the rear bumper. They also sanded and cleared my headlights, even though I'm throwing my JDM headlights on this week. I figured while they're sanding/clearing stuff, might as well do them
I also had them paint the grill. We left a tiny strip of silver on each side and color matched the rest of the grill.
Onto the pics of the grill. No need for the rest of the car, you couldn't really see in the pics all the things that were wrong/fixed...
I also had them paint the grill. We left a tiny strip of silver on each side and color matched the rest of the grill.
Onto the pics of the grill. No need for the rest of the car, you couldn't really see in the pics all the things that were wrong/fixed...
#62
Senior Moderator
Car looks good.
#63
Racer
Thread Starter
So I can't get a decent pic of the lights when my iPhone. Don't have a regular (good camera)
ASpec will be here Wednesday or Thursday of next week. I'll wait to put the JDM headlights in until then so I only have to remove the bumper once.
.
ASpec will be here Wednesday or Thursday of next week. I'll wait to put the JDM headlights in until then so I only have to remove the bumper once.
.
Last edited by NathanJax; 03-19-2015 at 05:56 PM.
#65
Racer
Thread Starter
Figured it was time for something different so I went a car route this time.
#66
great job on the Mod's your moving so fast my goal is to have in completely no more than a year after I have bought it so I have about six months left. where did you get the chrome molding from.
#67
Racer
Thread Starter
Bought from my local Acura dealer. They give a decent discount to local forum members
#69
Senior Moderator
The following users liked this post:
EL19 (04-28-2015)
#71
Racer
Thread Starter
Hopefully my front lip will be here Monday or Tuesday so I can throw it on with the headlights...
I decided on some rims. Might change them up later, but I was tired of rolling stocks for now.
Rohana RC10 20x9 +35 and 20x10 +40
Nitto 555 235/35/20 and 275/30/20
Crappy iPhone pics. Once I get my headlights and lip on this week I'll get some good pics. I also have the paint in my garage to do my calipers. I'm doing silver with black letters and bolts
I decided on some rims. Might change them up later, but I was tired of rolling stocks for now.
Rohana RC10 20x9 +35 and 20x10 +40
Nitto 555 235/35/20 and 275/30/20
Crappy iPhone pics. Once I get my headlights and lip on this week I'll get some good pics. I also have the paint in my garage to do my calipers. I'm doing silver with black letters and bolts
The following users liked this post:
Ratheruneeq (09-11-2015)
#73
Racer
Thread Starter
Front lip finally came in. My first lip actually came in last Wednesday, but the box was busted and the lip was cracked in two pieces. They re-ordered a new lip and it cam in today. I'll have the headlights and the lip installed by Wednesday night...
#74
Senior Moderator
Looks good!
#76
Racer
Thread Starter
Well, I finally got the rear sway bar swapped out. I can tell a little bit of a difference. I think it's probably worth the $60 and 15 minutes I spent swapping it out. Gotta remove the rear tires and it unbolts, slides out either side with pulling down on the exhaust to get the bar out. I put it on a lift to do it.
05-08 bar 17.3mm
09-12 bar 19.3mm
Here's a pic of the 05-08 on top and 09-12 on the bottom
I hope to get to the front ASpec lip and headlights tomorrow.
.
05-08 bar 17.3mm
09-12 bar 19.3mm
Here's a pic of the 05-08 on top and 09-12 on the bottom
I hope to get to the front ASpec lip and headlights tomorrow.
.
#77
Racer
Thread Starter
Got the front lip installed today. Crazy that you have to drill holes and cut out the fog lights. Talking about a scarey 30 minutes...
I went to install the JDM headlights but I stopped and concentrated on the bumper. I'm leaving on vacation for a week (driving my car) and I had to make sure I had a bumper to drive with. I'll have to do some research with installing them as well but I'll get in to that later.
.
I went to install the JDM headlights but I stopped and concentrated on the bumper. I'm leaving on vacation for a week (driving my car) and I had to make sure I had a bumper to drive with. I'll have to do some research with installing them as well but I'll get in to that later.
.
The following users liked this post:
oo7spy (04-06-2015)
#78
Moderator
iTrader: (2)
Join Date: Apr 2012
Location: Buffalo Grove, IL
Age: 34
Posts: 2,676
Received 612 Likes
on
490 Posts
Got the front lip installed today. Crazy that you have to drill holes and cut out the fog lights. Talking about a scarey 30 minutes...
I went to install the JDM headlights but I stopped and concentrated on the bumper. I'm leaving on vacation for a week (driving my car) and I had to make sure I had a bumper to drive with. I'll have to do some research with installing them as well but I'll get in to that later.
.
I went to install the JDM headlights but I stopped and concentrated on the bumper. I'm leaving on vacation for a week (driving my car) and I had to make sure I had a bumper to drive with. I'll have to do some research with installing them as well but I'll get in to that later.
.
#79
Racer
Thread Starter
I'm trying to search now and see if anyone has a "how to" on the JDM headlights for an easy swap.
#80
Senior Moderator
The ASpec does so much for this car.