Vent problem 2013 RDX (power transistor)
02-21-2018, 08:28 AM
#1
6th Gear
Thread Starter
Join Date: Dec 2014
Location: Wejherowo, Poland
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Vent problem 2013 RDX (power transistor)
Hello guys,
I have a problem with my 2013 RDX. When I turn ignition ON, ventiation blower motor starts working at full speed. When I decelerate it on the ac panel it still blows at full speed. If I push turn off buton it still works at full speed. It goes of only when I turn off the ignition. AC works ok. Probably there is a problem with heater blower resistor (power transistor 79330-TR0-A01). Anybody had similiar problem? Where that resistor is located?
Thanks for help!
I have a problem with my 2013 RDX. When I turn ignition ON, ventiation blower motor starts working at full speed. When I decelerate it on the ac panel it still blows at full speed. If I push turn off buton it still works at full speed. It goes of only when I turn off the ignition. AC works ok. Probably there is a problem with heater blower resistor (power transistor 79330-TR0-A01). Anybody had similiar problem? Where that resistor is located?
Thanks for help!
It was bad power resistor
03-02-2018, 08:09 AM
#3
Burning Brakes
Thread
Thread Starter
Forum
Replies
Last Post