little brad

those of you riding lower than most, what camber kits are you running? where'd ya get em? i need to get my ass in gear and do this so i don't end up buying tires every few months. i just wanna get something i know will do the job. tia

Farabeast

I have the SPC kit, no problems with it. I believe they had two kits available, you'll want the one for a 3"+ drop. I bought it new on ebay, dont remember from who or what I paid.

Time For Sleeep

I have the spc camber kit in the front and the rear.

I would suggest popping the few extra bucks for the Ingalls for the fronts.

The SPC's aren't low profile (or something like that) and tend to do a good deal of bumping and clanking if you're slammed really low.

I'm sure someone can roll in here and explain it in much more detailed terms =P.

mantis23

I have the SPC front and rear. I'm dropped 3+ inches.

No problems at all.

little brad

thanks for the input, boys. i dont know exactly how low i am, but im tuckin stock tires.

cltypeSLOW

i would say to get the ingalls front setup, and the SPC rear. if i could do it all over again thats how i would do it. im not too happy with my SPC fronts as they add about 1-1.5 inches to the top of your control arm...so that really hurts your suspention travel and when you hit big bumps theres this godawful noise that you get from the control arms balljoint smacking the shock tower.

htown

I'm running SPC fronts and rear

Here's me tucking 45 series with camber kit

All Mine

Good to know. I just blew out both front 19"s. So I'm guess mmy camber is pretty damn bad. One of the vendors on here was selling fronts for like $145, but I can't remember which brand they are.

cltypeSLOW

ebay the camber kits...i found a seller on there doing front and rear for 3+ drop brand new for only 215 shipped