Originally Posted by Jacobpockros
(Post 12896115)
Did you notice any gain with the Whale Penis intake?
Originally Posted by anthracitecl
(Post 12896178)
Damn I love your intake! I want one too!!!
|
Here goes a few pictures I just took now since my brothers cl and my uncles car is in the driveway enjoy.
http://i27.photobucket.com/albums/c1...body/001-2.jpg http://i27.photobucket.com/albums/c1...body/003-2.jpg http://i27.photobucket.com/albums/c1...body/002-1.jpg |
I like the CL-P the most
|
how much would you charge to make another one of those cause that looks to beast :bigeek:
|
^ x2
|
It all depends how many all of you guys would want total. I can get a price list together of all the materials used. If you guys are serious I can have a few made.
|
Damn! looks really nice!!!:toocool: love it! Is it YAMAHA? I don't know much about bike.
and let me know how much it(intake) cost. You can pm me. Thanks. |
Originally Posted by anthracitecl
(Post 12911045)
Damn! looks really nice!!!:toocool: love it! Is it YAMAHA? I don't know much about bike.
and let me know how much it(intake) cost. You can pm me. Thanks. |
I might be interested as well depends on the price but i belive we have to keep it via PM because none of us is a vendor here :2cents:
|
I agree with Streetka. pmed
|
Ok I'll speak with my friend today to get a material price list and a idea about how much it would cost to make them labor wise.
|
that bike looks good. love the stretch.
|
bad ass bike man!
|
I'am interested in this intake as well. Looks really good in the engine bay.
|
You need a new rear tire.
And your swingarm looks broken :snicker: |
Originally Posted by p.diddy
(Post 12915541)
that bike looks good. love the stretch.
Originally Posted by nspec_ya4
(Post 12916079)
bad ass bike man!
Originally Posted by Blazinaccord
(Post 12916283)
I'am interested in this intake as well. Looks really good in the engine bay.
Originally Posted by civicdrivr
(Post 12918934)
You need a new rear tire.
And your swingarm looks broken :snicker: As for the swingarm I know most people don't like them extended but trust me mine it put to use and is far from just for looks. So far my best 60ft to date is 1.5 while still foot shifting. I'm changing the rear sprocket when I put the new tire on, getting it dyno tuned since it's still only tweaked by me, and adding a air shifter within the next few weeks. Hopefully I can cut a 1.4 60ft and run at least a 9.5 et. Depending how close I am to running high 8's I might spray it with a small shot just to say I have a 200+whp and still a street bike. |
As soon as we come up with a material price list and a total price for it made I'll let you guys know. Also would you all want it to be polished aluminum like mine or powder coated any color you want? The powder coater we use is one minute away from his shop and does great work.
|
I would definately want one. Aluminum or powder coated black.
|
I haven't been around a computer lately since I've been on vacation the past week in NY. I decided before I left I want to get my intake piping, throttle body, p2r throttle body spacer, upper intake manifold, upper intake manifold top cover, p2r intake plenums, and valve covers powder coated. Once I'm back and pick up the parts I will know how much the coater would charge to get the intake piping coated. While I have it apart I'm going to do a valve adjustment and relocate the battery to the trunk to clean up the engine bay some.
As for the price of the intake it will cost $400 shipped anywhere in the united states. The material list is: 1. Burns Stainless aluminum transition long 14 degree or short 30 degree taper 2 3/4 - 3 1/2. I went with short on mine. $39.30 2. Vibrant Performance aluminum 90 degree piping. $43.95 Each two total 3. Vibrant Performance aluminum straight piping. $36.95 4. Vibrant Performance silicone reducer coupler $28.95 Three colors available black, blue, or red. 5. Vibrant Performance five inch tall air filter $46.95 6. Vibrant Performance stainless steel t bolt clamps. $13.95 each two total Total price for materials would be $267.95 polished without powder coating which would be a additional cost if wanted. Here's a picture I took after I took everything off to get coated. http://i27.photobucket.com/albums/c1...-45-29_193.jpg |
love the car, love the bike, love the intake..
|
|
Originally Posted by rush
(Post 12968902)
|
Originally Posted by rush
(Post 12968902)
his is 3.5", is yours the actual 4"? |
Thanks for the compliments guys. AARONSredTYPE-S you can have the same exact intake as mine if you read post number 60. I posted all the details about it finally lol. Yours looks good too rush.
|
Thanks how many bends does your intake have
|
i found all the material on cxracing.com for $118 without a filter, which is about 50-60 somewhere else. So, 170-180 total is great for a 4" intake....
on another note, are you gonna smoke the tails and black out the chrome window trim? |
Originally Posted by rush
(Post 12971793)
Thanks how many bends does your intake have
|
Originally Posted by AARONSredTYPE-S
(Post 12972152)
i found all the material on cxracing.com for $118 without a filter, which is about 50-60 somewhere else. So, 170-180 total is great for a 4" intake....
on another note, are you gonna smoke the tails and black out the chrome window trim? |
Originally Posted by 1foxbody
(Post 12972630)
Yes I just can't make up my mind whether to just smoke the whole light or just the clear part. Correct I'm blacking out the trim also.
rvinyl.com is a good place for tail light film and the vinyl for the trim, or decalfx is good too. thats where im gonna get my stuff...gl |
Originally Posted by AARONSredTYPE-S
(Post 12972740)
cool, but dont black out the whole light, just the red or just the clear.
rvinyl.com is a good place for tail light film and the vinyl for the trim, or decalfx is good too. thats where im gonna get my stuff...gl |
not abad decision if you know 100% what you want and the person doing it is really good, because there is no going back from paint. Plus, on my old red cl-s, i painted the tails and it never looked as good as the vinyl because of the finish. Plus the coats have to be exact and perfectly even or you will see it clear as day when the light is on....we'll see what you do..look on you tube for the guys i talked about with the vinyl and you will see how simple it is and may change your mind...gl buddy
|
Originally Posted by AARONSredTYPE-S
(Post 12975095)
not abad decision if you know 100% what you want and the person doing it is really good, because there is no going back from paint. Plus, on my old red cl-s, i painted the tails and it never looked as good as the vinyl because of the finish. Plus the coats have to be exact and perfectly even or you will see it clear as day when the light is on....we'll see what you do..look on you tube for the guys i talked about with the vinyl and you will see how simple it is and may change your mind...gl buddy
|
I got my car all back together finally! I got a few parts powder coated and while they were off I had type jdm do a valve adjustment thanks again Steven! I changed the plugs also. Here's some pictures I took today don't mind the white shit on my passenger side headlight that was throttle body cleaner from my friend by accident. They still need to be buffed out anyways.
http://i27.photobucket.com/albums/c1...body/015-2.jpg http://i27.photobucket.com/albums/c1...body/016-2.jpg http://i27.photobucket.com/albums/c1...body/017-3.jpg |
best engine bay ive seen on a cl...looooove it
|
Wow nice progress so far. What are your other plans?
Btw, very nice bike, and I love that extended fork. How does it ride with extended? Did handling improved by a lot? |
Originally Posted by AARONSredTYPE-S
(Post 12983192)
best engine bay ive seen on a cl...looooove it
Originally Posted by turbo_911
(Post 12986055)
Wow nice progress so far. What are your other plans?
Btw, very nice bike, and I love that extended fork. How does it ride with extended? Did handling improved by a lot? |
Your shits coming along great bro. Engine bay is sex as well.
http://i27.photobucket.com/albums/c1...3A01126302.jpg http://i27.photobucket.com/albums/c1...body/003-3.jpg |
Originally Posted by Jacobpockros
(Post 12986516)
Your shits coming along great bro. Engine bay is sex as well.
|
Originally Posted by 1foxbody
(Post 12986643)
Thank you! I opened up the headlights today to black the bezels and corners out. I'm also going to try and make the lenses as clean as possible with a wet sand and buff. I already did it once while they were on the car with wax and it helped some as you can see from those two pictures. Once I decide what to do with my taillights I'll do that soon also.
If your going to re-do them though, I recommend trying to find some source of uv protection for them just to be safe. |
All times are GMT -5. The time now is 05:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands