Setting Luk SAC ?
 

So I made a setup with a 3 jaw puller to wind back the PP to where it need to be but why when the tab is are far as it goes there's still is a 1/8" gap where the pressure plate meets the flywheel.
I know nothing about the sac pressure plate.

Should i just screw it down now or is there something else I need to do ?

https://cimg5.ibsrv.net/gimg/acurazi...b46d3a7d0c.jpg


https://cimg6.ibsrv.net/gimg/acurazi...4b8505311a.jpg