clridahh

I have a problem with my aem cai for my cl-p. Its a two piece set and i got the bypass valve with it. I thought to my self how is the second piece going to be supported?? I went along and installed the bypass valve and the second piece. The second piece had no support. It was just hanging from the first piece. Two days later, i noticed that the second piece was comming off and the bypass valve was loose. The whole thing was loose! i tried to attach it back but the bypass valve was shifting and felt broken. Does anyone know if my bypass valve is messed up?? and does anyone know a way to support my second piece?? thankss everyonee..i may ask more questions later..pics would help too

------------------
BLACK ON BLACK CL-P
HYPER WHITE LIGHTS
POLARG M6
AEM INTAKE/BYPASS VALVE
...IF IT DOESNT KILL YA..IT ONLY MAKES YA STRONGER!!!...

Iridium130

------------------
_-Phil-_!
2K1 #10,029 Satin Silver CL-S since 6/13/00 named Laetitia with Navi! Mods : XEPHYR PERFORMANCE CAI~3M Reflective Tint(37%) tint~Hiper Hibrid Plasma "Xenon" road lamps & high-beams~Uniden LRD 6599SWS Radar Detector~Shine by Meguiar's Gold Wax~Member of the Scratched Rims Club~Upgraded cupholder ~

Xephyr2K

Dear AEM customer,

Visit my forum her for photos on how I resolve this problem with a few dollars of parts. Email me and Ill point you in the right direction or sell you my hardware for 6 or 7 dollars.. Hope that helps,

Chris


------------------
2001 Nighthawk Black CLS Type S - Xephyr Performance CAI, PIAA 19173(Yellow) Road Lamp Upgrades, Full Wood Trim, Spoiler, 1/4 Mile in 14.424@97.23 MPH Atco Raceway 3/10/01 Best GTECH Sprint 5.554/28/01 with Poobah watching Xephyr Performance Intakes

clridahh

The problem i have really is that there is a piece molded on the second pipe...i dont know if its to put that one wire on that molded piece or to use it to support it..thanksss




------------------
BLACK ON BLACK CL-P
HYPER WHITE LIGHTS
POLARG M6
AEM INTAKE/BYPASS VALVE
...IF IT DOESNT KILL YA..IT ONLY MAKES YA STRONGER!!!...

laser1180

well, this is wat i did.... drill a tiny hole, then zip tie it... Mine was secure very good, even i take the bypass valve off, the secondary still hanging there, so i think zip-tie is ur best bet... I was having the same problems too, secondary kept moving, and it get loose... after i zip tie it, it had been 3 months now, still safely secure. Hope this will help.



------------------
Edward
99TL, 01 CLP with stuff.
Houston(Sugarland),TX