HKS Draggers are in
#44
lowrd on tein CS biatch
iTrader: (2)
I had a stainless steel exhaust on my probe for over 5 years and drove that through all the snow and no signs of rust or anything so u'll be fine! just wash it when u get the chance.
I had an exhaust leak on my cl and the bolts were rusted to SHIT.
YOU MUST TORCH THEM OFF.
heat bolt up till it's red then knock it out.. you will not damage the flange by doing this if you are careful with the torch.
but heat it up, and then the bolts will fly out with one touch of a hammer. if u try and do it w/o heat ur could bend the flange from hitting it with a hammer. so. I recommend the torch
I had an exhaust leak on my cl and the bolts were rusted to SHIT.
YOU MUST TORCH THEM OFF.
heat bolt up till it's red then knock it out.. you will not damage the flange by doing this if you are careful with the torch.
but heat it up, and then the bolts will fly out with one touch of a hammer. if u try and do it w/o heat ur could bend the flange from hitting it with a hammer. so. I recommend the torch
#45
Waits for Shakira in his
Thread Starter
Join Date: Aug 2008
Location: Hyattsville Maryland
Age: 32
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
I finally put them on and went out for a test drive... all i can say is wow i love this exhaust pic will be posted tomorrow
#50
lowrd on tein CS biatch
iTrader: (2)
just read ur sig...
does ur car really hold it's own against a cl-s now with the mods u got?
I'd think it'd be close, but my $ is on the type S nudging u out. (or would it?)
pulley, intake, and exhaust, isn't a 35hp equivalent..
but i am curious to see how the 2 would look in a WOT run
videos PLZ
does ur car really hold it's own against a cl-s now with the mods u got?
I'd think it'd be close, but my $ is on the type S nudging u out. (or would it?)
pulley, intake, and exhaust, isn't a 35hp equivalent..
but i am curious to see how the 2 would look in a WOT run
videos PLZ
#51
Waits for Shakira in his
Thread Starter
Join Date: Aug 2008
Location: Hyattsville Maryland
Age: 32
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
Lol when i say i keep up with CL-S i mean i can and i have beat some type-s im guessing they were stock but the modded CL-S I just keep up not pass lol at least not yet.
#54
Whats up with RDX owners?
iTrader: (9)
#57
Suzuka Master
iTrader: (3)
that aint the only clean thing about your car. i did some investigative work when i saw paul to look my car over yesterday. dont worry i wont let the cat out the bag. but i must say im very impressed.
#58
Whats up with RDX owners?
iTrader: (9)
Were you the one in the video asking what exhaust was on the car?
lol
lol
#60
Whats up with RDX owners?
iTrader: (9)
Oh.
Paul made a video of the first startup, there was someone in the background asking what exhaust was on the car.
Anyway, thanks for the compliment
Paul made a video of the first startup, there was someone in the background asking what exhaust was on the car.
Anyway, thanks for the compliment
#62
Whats up with RDX owners?
iTrader: (9)
#63
Suzuka Master
iTrader: (3)
i was supposed to crash at his house next week so he could do my 3g swap and rebuild but with this snow it might be pushed back a few days. he said it would only take like 2 days. paul is like 3 hours from me so its not too bad for me. oh sorry for threadjack also. were looking at a '07 TL tranny so it should last. yea too bad you cant stop by.
Last edited by p.diddy; 12-19-2009 at 08:01 PM.
Thread
Thread Starter
Forum
Replies
Last Post
SilverBullet_RENAMED
Car Parts for Sale
14
01-04-2003 01:38 AM
jdtypeS
Car Parts for Sale
11
06-18-2002 02:54 PM