Dyno Day 2 Pulls with A/F for $40 @ NE Dyno And Tuning.
 

It is at:

Date: Saturday : 09-27-2003
Dyno Shop: New England Dyno & Tuning
Address: 7 Lenora Street - Worcester, Massachusetts 01607
Phone: 508-752-5557
Website: http://www.nedyno.com/
Cost: $40.00
Dyno Used: Dynojet 248h
Details: 2 consecutive dyno pulls with A/F readout
Sign Ups: 14 / 35
Participant List: [view]


http://www.dynoperformance.com/dynoday.php

Ah, the 27th is the NED Import Wars!

wish i lived closer:(

have fun;)

i dynoed my car 2 weeks ago with fuel problems

244hp and 260lbs of torque

How is your car setup these days Fast?

thats the same address I sent a money order to for my digital boost gauge.

they also have a website
www.dynotune.org
www.speedshop.org

btw the digital boost gauge is awsome quality and very accurate .1 psi accuracy

look at the sig;)

let me know if you have any questions


mods on my 99 3.0CL

COMPTECH HEADERS
AEM PULLIES
AC AUTODESIGN COLDAIR INTAKE
CUSTOM CAM GEARS
APEX VTEC CONTROLLER
TANABE MUFFLER
CUSTOM EXAUST PIPING 3" INCHES
ZEX 125 SHOT .............. (new shot)
RPM SWITCH FOR NOS
SPARK PLUGS FOR NOS
TRANNY COOLER
MSD IGNITION
WALBORO 255 FUEL PUMP (new)
5 way adjustable shocks (new)


BEST RUN 13.6@106MPH (with 100 shot) !!!!

HAVE IT ON VIDEO!!!

check out www.undergroundracing.com

beater 02 TL-S

TX to Massachusets is what, 20 hours drive ? ;)

Longer than that. I drove from Portsmouth, NH, to Knoxville, TN, in 16 hours. Mind you, Portsmouth is about an hour-and-a-half to two hours north (northeast) of Worcester.

http://www.mapquest.com/directions/m...&lr=2&x=87&y=8

Austin, TX
US

7 Lenora St
Worcester, MA
01607-1431 US

Total Distance: 1971.50 miles
Total Estimated Time: 31 hours, 52 minutes

1: Start out going East on E 5TH ST toward BRAZOS ST. 0.33 miles
2: Turn LEFT onto RED RIVER ST. 0.14 miles
3: Turn RIGHT onto E 7TH ST. 0.19 miles
4: Turn LEFT onto I-35 N. 0.12 miles
5: Merge onto I-35 N/ US-81 N via the ramp- on the left. 136.50 miles
6: Take the I35E N exit toward DALLAS. 0.35 miles
7: Merge onto I-35E N. 47.02 miles
8: Merge onto I-20 E via exit number 418B toward SHREVEPORT. 12.29 miles
9: Take I-635 N toward MESQUITE. 8.90 miles
10: Merge onto I-30 E via exit number 8B toward TEXARKANA. 309.47 miles
11: Merge onto I-40 E via exit number 143B toward MEMPHIS. 342.48 miles
12: Merge onto I-65 N via exit number 208B- on the left- toward LOUISVILLE. 167.59 miles
13: Merge onto I-264 E via exit number 131-A. 11.34 miles
14: Merge onto I-71 N via exit number 23A toward CINCINNATI. 311.17 miles
15: Merge onto I-271 N via exit number 220 toward ERIE PA. 40.42 miles
16: I-271 N becomes I-90 E (Portions toll). 447.96 miles
17: Take NEW YORK STATE TRWY S/ I-87 S toward NEW YORK (Portions toll). 14.52 miles
18: Take the exit- exit number 21A- toward I-90 E/ MASS TPKE/ BOSTON. 0.90 miles
19: Merge onto NEW YORK STATE TRWY E (Portions toll). 24.09 miles
20: NEW YORK STATE TRWY E becomes I-90 E/ MASS PIKE/ MASSACHUSETTS TURNPIKE (Portions toll). 93.31 miles
21: Take the exit- exit number 10A- toward US-20/ WORCESTER/ RT-146/ PROVIDENCE. 0.71 miles
22: Turn RIGHT. 0.34 miles
23: Turn LEFT. 0.07 miles
24: Turn RIGHT onto MA-146 N/ MA-122A N/ WORCESTER PROVIDENCE TURNPIKE. Continue to follow MA-146 N/ MA-122A N. 0.94 miles
25: Turn LEFT onto MILLBURY ST. 0.34 miles
26: Turn LEFT onto LENORA ST. 0.02 miles
Total Estimated Time: Total Distance: 1971.50 miles
31 hours, 52 minutes

Christ Pete! I doubt the dude is gonna make that trip! It was nice of you to give him directions though.

Im not interested in using the dyno, however i am always in the worcester area and i might stop by to check it out... if there are other CLs there. Keep us updated Nashua

:D

Besides Steve, is anyone considering going and getting dynoed? I'm curious at this point to find out both what the car dynos at and what my 1/4 would be. maybe I can do both that Saturday.

Anyway I might sign up...although it seems I might be the second weakest car there (Altima SE everything else should be pretty fast).

ferizzo, dyno and Import Wars at the same day!...I have put some 150 miles and 3 hrs just to do the trip and back to Epping. Not feasible for me.

By Spet 27, I may already have this new Mr Dyno Gadget and I will be having it tuned at the NED.