LiQiCE

I just bought a Comptech Axleback Exhaust from a member and he shipped the axleback exhaust, but absolutely no bolts or washers. Are these required or can I get away with using the stock bolts/washers that are already holding up my exhaust?

Thanks!

darrinb

i think ya need the c/t ones

1gCL

iTrader: (1)

The bolts are different sizes. Just run to Home Depot and pick up a pair.

AztecRol

iTrader: (2)

If you do a search, you will see post from me. Its probably like two years ago now. But I had the same problem. I bought a set used from a board member and got no screws. I had called comptech, and they gave me the bolt sizes. I know they were metric. I wanna say 10 X 32????? Anyways, I know I posted the size of the bolts, nuts, and washers. I also posted how many you needed!!

juniorbean

iTrader: (5)

When I bought mine from Comptech (about 18-20 months ago) it came with all the hardware.

The ones we sell also come with all the hardware (since they're manufacture direct).

That's strange that it didn't come with anything

blader

junior, he bought them used .. thats why they didnt come with anything

member probably either forgot to include them or lost them. The stock bolts I think are welded to the muffler flange itself, so you can't use them.