2003 CL-S 6spd Turbocharged.... DONE!!!
02-01-2003, 08:10 PM
#1
Safety Car
Thread Starter
2003 CL-S 6spd Turbocharged.... DONE!!!
02-01-2003, 08:34 PM
#5
Senior Moderator
Re: 2003 CL-S 6spd Turbocharged.... DONE!!!
Originally posted by allmotor_2000
Project Complete!!!!
http://photos.yahoo.com/bc/gunjan_ra...c=ph%26.view=t
Project Complete!!!!
http://photos.yahoo.com/bc/gunjan_ra...c=ph%26.view=t
02-01-2003, 08:38 PM
#6
Safety Car
Thread Starter
It's significantly quicker 
but I have yet to take it past 5K RPM's!! I am running a 5psi spring right now... it reaches max boost at 2300 RPM in any gear. 4th gear is ridiculous while passing people on the freeway. I need to twiddle with the fuel pressure and make sure everything runs right before going all out.
This is the second mod to my car... the first being the Comptech Headers. I'd say the difference is like 5-6x of the Comptechs. I will take it easy until I dyno it and figure out everything is working properly.
By the way... I JUST LOVE THE BLOWOFF VALVE!! I *pssffftt* past this convertible 'vette and you should have seen the baffled look on his face!!
The car has stock exhaust and is stock height.
but I have yet to take it past 5K RPM's!! I am running a 5psi spring right now... it reaches max boost at 2300 RPM in any gear. 4th gear is ridiculous while passing people on the freeway. I need to twiddle with the fuel pressure and make sure everything runs right before going all out.This is the second mod to my car... the first being the Comptech Headers. I'd say the difference is like 5-6x of the Comptechs. I will take it easy until I dyno it and figure out everything is working properly.
By the way... I JUST LOVE THE BLOWOFF VALVE!! I *pssffftt* past this convertible 'vette and you should have seen the baffled look on his face!!
The car has stock exhaust and is stock height.
Trending Topics
02-01-2003, 09:33 PM
#14
VOTE OUT THE BUSH REGIME
Join Date: Mar 2002
Location: PHX
Posts: 2,207
Likes: 0
Received 0 Likes
on
0 Posts
Yes high rez pics!!! FROM ALL ANGLES! 
That shit be TIGHT!@! What kind of FMU did you use?? cartech, vortech?
How hard was it to route the mandrel bent tubing to the intercooler? Did you have to cut some holes up front for the tubes?
The power up top must be insane...
CONGRATULATIONS!!!!
That shit be TIGHT!@! What kind of FMU did you use?? cartech, vortech?
How hard was it to route the mandrel bent tubing to the intercooler? Did you have to cut some holes up front for the tubes?
The power up top must be insane...
CONGRATULATIONS!!!!
02-01-2003, 10:21 PM
#18
Sold 12/29/04 :-(
Join Date: Feb 2001
Location: Ft. Lauderdale, FL
Age: 49
Posts: 1,277
Likes: 0
Received 0 Likes
on
0 Posts
Nice picture under the hood 
Congratulations on a job well done.
Now that you have the bumper back on, PLEASE post a picture of the INTERCOOLER!!!!
Congratulations on a job well done. Now that you have the bumper back on, PLEASE post a picture of the INTERCOOLER!!!!
02-01-2003, 10:34 PM
#19
Safety Car
Thread Starter
I'll take some pictures of the front tomorrow... I need to put some thermal-wrap on the downpipe as its 1" from the lower radiator hose (not that it will do anything... just my paranoia).
I can't weld... so there's no point in me coming up and trying to make a turbo-kit for you
When I get bored of it... I'll sell it to you!
I am sure there's some tuning left to do before it hits any sort of big hp number... so we shall see.
I cut a total of 1" square during this whole job... just a little bit of plastic in the bumper where that fog-lamp gadget is... cuz the intake pipe was barely touching it.
I used the Comptech FMU... its fully adjustable and works pretty well (same as their S/C kit)
I can't weld... so there's no point in me coming up and trying to make a turbo-kit for you
When I get bored of it... I'll sell it to you!
I am sure there's some tuning left to do before it hits any sort of big hp number... so we shall see.
I cut a total of 1" square during this whole job... just a little bit of plastic in the bumper where that fog-lamp gadget is... cuz the intake pipe was barely touching it.
I used the Comptech FMU... its fully adjustable and works pretty well (same as their S/C kit)
02-02-2003, 06:21 AM
#23
Senior Moderator
my stomach got all fluttery when i looked at that pic.
looks like so much fun. there are gonna be some shocked m3's and such running around your area.
them =
looks like so much fun. there are gonna be some shocked m3's and such running around your area.
them =
02-02-2003, 02:30 PM
#33
Safety Car
Thread Starter
02-02-2003, 04:39 PM
#39
Senior Moderator
