Ron Jon
05-23-2005, 07:54 PM
#1
Pro
Thread Starter
Join Date: May 2005
Age: 36
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
Ron Jon
I was looking for rims to put on my car i have been looking at ronjon because they r made for acuras. Anyway my question is that it posible to put the devotion 3 piece 19 inch wheels would fit on the tsx.
05-23-2005, 09:20 PM
#2
Drifting
Originally Posted by tsxgoogs
I was looking for rims to put on my car i have been looking at ronjon because they r made for acuras. Anyway my question is that it posible to put the devotion 3 piece 19 inch wheels would fit on the tsx.
I believe they are a similar fitment to the CL which rondog actually drives. The 3 piece wheels are on his car too.
05-27-2005, 02:11 PM
#4
Luke 1:37
Join Date: Nov 2004
Location: Boston, MA
Age: 44
Posts: 4,425
Likes: 0
Received 0 Likes
on
0 Posts
What color TSX do you have? If you have the silver color, then I would definitely get the Ron Jon Inspyres. They look hot on this color and even without the car lowered. Ron Jon has a pic of the silver TSX with Inspyres on his website gallery. You'll love it! Actually, here's one of the pics:
05-27-2005, 02:53 PM
#5
Drifting
Originally Posted by hbux
I check the price of the "Devotion" wheel of Ron Jon. Each wheel is $850. a set of 4 is over 3K + tire. I think there is a lot of choice if you are willing to pay this price.
He doesn't really have a choice if he wants a custom 3 piece wheel.
Typically those will run you a lot more than $850 each.
The RonJon 3 piece wheels are a pretty good deal for that price and quality.
They actually custom make these to order.
Personally, i think that spending 3.5K+ on wheels and tires on a car that's under $30k new is kind of silly.
But then again... some folks have done silier things.
05-27-2005, 03:00 PM
#6
Registered Abuser of VTEC
Originally Posted by Alin10123
Um...
He doesn't really have a choice if he wants a custom 3 piece wheel.
Typically those will run you a lot more than $850 each.
The RonJon 3 piece wheels are a pretty good deal for that price and quality.
They actually custom make these to order.
Personally, i think that spending 3.5K+ on wheels and tires on a car that's under $30k new is kind of silly.
But then again... some folks have done silier things.
He doesn't really have a choice if he wants a custom 3 piece wheel.
Typically those will run you a lot more than $850 each.
The RonJon 3 piece wheels are a pretty good deal for that price and quality.
They actually custom make these to order.
Personally, i think that spending 3.5K+ on wheels and tires on a car that's under $30k new is kind of silly.
But then again... some folks have done silier things.
Trending Topics
05-28-2005, 07:30 PM
#8
It's a free country and people can do whatever they want to their cars. But again, it's a free country and if you post pics of it, we can make fun of you for it too! 
But kidding aside, that picture of the Ron Jon rims look hot. One of the better looking ones out there for TSX IMO.
But kidding aside, that picture of the Ron Jon rims look hot. One of the better looking ones out there for TSX IMO.
05-28-2005, 09:22 PM
#9
Drifting
Originally Posted by scl23
It's a free country and people can do whatever they want to their cars. But again, it's a free country and if you post pics of it, we can make fun of you for it too!
But kidding aside, that picture of the Ron Jon rims look hot. One of the better looking ones out there for TSX IMO.
But kidding aside, that picture of the Ron Jon rims look hot. One of the better looking ones out there for TSX IMO.
I just hope that they look somewhere near as nice on my CG as they do the SSM.,
05-29-2005, 08:57 AM
#10
|____\\===(/\)===//____|
Join Date: Apr 2005
Location: Montreal
Age: 50
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
692$
671$
For multi piece rims Racing Harts are pretty good too, I think that RJ Inspyres are a bit too much "OEM" looking (ordinary looking.)
J-F
05-29-2005, 10:38 AM
#11
Originally Posted by DaBlackT
692$
671$
For multi piece rims Racing Harts are pretty good too, I think that RJ Inspyres are a bit too much "OEM" looking (ordinary looking.)
J-F
05-29-2005, 10:19 PM
#14
|____\\===(/\)===//____|
Join Date: Apr 2005
Location: Montreal
Age: 50
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
In order to fit my tiny budget I will most likely get Racing Hart C4 (not the multi piece ones.) I had BBS CH on my Jetta but I just cant afford another set of those (even though they looked amazing and were very stong.) If money wasn't a problem I would get a set of BBS LM... but that's another story.
Without prejudice.
But I still believe that if one is willing to spend money (around 800$ each) on rims, that person should go with a company that has proven itself in racing. For example in 2005, 4 companies are manufacturing wheels for the F1 cars : OZ - BBS - ENKEI - FONDMETAL. But then again rims are mostly an emotional thing, most people buy them for looks first.
But that is just my humble opinion.
J-F
Without prejudice.
But I still believe that if one is willing to spend money (around 800$ each) on rims, that person should go with a company that has proven itself in racing. For example in 2005, 4 companies are manufacturing wheels for the F1 cars : OZ - BBS - ENKEI - FONDMETAL. But then again rims are mostly an emotional thing, most people buy them for looks first.
But that is just my humble opinion.
J-F
05-30-2005, 11:20 PM
#18
|____\\===(/\)===//____|
Join Date: Apr 2005
Location: Montreal
Age: 50
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
BTW other similar options
Similar in construction and design (3 pieces) --> SSR GT3 at 23,8lbs for 18"x8" : 559$
Or SSR GT10 (also 3 pieces) at 23,4lbs for 18"x8" : 629$
IMHO : I think that the GT3 would look amazing on a TSX
J-F
Similar in construction and design (3 pieces) --> SSR GT3 at 23,8lbs for 18"x8" : 559$
Or SSR GT10 (also 3 pieces) at 23,4lbs for 18"x8" : 629$
IMHO : I think that the GT3 would look amazing on a TSX
J-F
Thread
Thread Starter
Forum
Replies
Last Post
lanechanger
Member Cars for Sale
4
10-13-2015 10:56 AM
