Car's computer says engine was over-reved-Dealer is voiding ptrain warranty, HELP!!!!
#81
Moderator Alumnus
Join Date: Jul 2003
Location: Windsor-Quebec corridor
Age: 47
Posts: 7,709
Likes: 0
Received 6 Likes
on
4 Posts
Originally Posted by DoCoMo
Hello,
My black TSX is running like a charm, and recently on the freeway I inadvertently drove it for about 10 miles on D3 between 70-80mph (I was going uphill (put it on "D3" and then merge onto a main freeway, but forgot to put it back on "D"). I could hear the engine making a slightly louder roar, and that what gave me a hint on my unintentional gear engagement. Can anybody tell me how "badly" this can ruin the transmission?
thanks,
I just love this car !!
My black TSX is running like a charm, and recently on the freeway I inadvertently drove it for about 10 miles on D3 between 70-80mph (I was going uphill (put it on "D3" and then merge onto a main freeway, but forgot to put it back on "D"). I could hear the engine making a slightly louder roar, and that what gave me a hint on my unintentional gear engagement. Can anybody tell me how "badly" this can ruin the transmission?
thanks,
I just love this car !!
#82
My bolonga has a 1st name
Thread Starter
Join Date: Oct 2001
Location: Fort Lauderdale, FL
Age: 39
Posts: 2,209
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by slo007
This is what its says on my invoice....
Problem:
A C/S THAT THE IDEL SEEMS TO BE VERY ROUGH
Solution:
DTC CODE P0219 ENGINE OVER SPEED RPM 8455 SPEED 96MPH CUSTOMER WAS DRIVING VEH. AT HIGH SPEED AND EITHER DOWN SHIFTED OR UPSHIFTED AND WAS OVER REVVED, ROUGH IDLE DUE TO DRIVING
#83
Suzuka Master
Originally Posted by 97AcuraCL
This is what its says on my invoice....
Problem:
A C/S THAT THE IDEL SEEMS TO BE VERY ROUGH
Solution:
DTC CODE P0219 ENGINE OVER SPEED RPM 8455 SPEED 96MPH CUSTOMER WAS DRIVING VEH. AT HIGH SPEED AND EITHER DOWN SHIFTED OR UPSHIFTED AND WAS OVER REVVED, ROUGH IDLE DUE TO DRIVING
Problem:
A C/S THAT THE IDEL SEEMS TO BE VERY ROUGH
Solution:
DTC CODE P0219 ENGINE OVER SPEED RPM 8455 SPEED 96MPH CUSTOMER WAS DRIVING VEH. AT HIGH SPEED AND EITHER DOWN SHIFTED OR UPSHIFTED AND WAS OVER REVVED, ROUGH IDLE DUE TO DRIVING
When you were referring to getting your oil changed, get it done at an Acura dealer. The reason I say this is that it looks as if you show financial obligation to the Acura division and not to some other party (A Honda dealer doesn't make it look as good, though it isn't as bad as going to Jiffy Lube).
Back to my earlier recommendation: If that dealer won't resolve this (which it seems they won't), call client services and get the ball rolling. You should have done this yesterday.
As for my background, I until recently, worked for Acura in service. Before that I have 4 years total for American Honda (2 years for Honda and 2 for Acura). I have worked in sales, F&I, sales management, and of course a little service and technical service. Basically, I know a LOT. Not to seem too cocky, but I am a good source of input.
#84
My bolonga has a 1st name
Thread Starter
Join Date: Oct 2001
Location: Fort Lauderdale, FL
Age: 39
Posts: 2,209
Likes: 0
Received 1 Like
on
1 Post
This will be my task this afternoon then, to get this started with Acura.
But I still can't help but feel they too are gonna say 'over-rev' = you're screwed.
I mean whats my case against them? Do I tell them that the over-rev doesn't mean anything? I mean I'm not sure how to argue this. Do I just explain the situation and wait for thier response?
But I still can't help but feel they too are gonna say 'over-rev' = you're screwed.
I mean whats my case against them? Do I tell them that the over-rev doesn't mean anything? I mean I'm not sure how to argue this. Do I just explain the situation and wait for thier response?
#85
Houston we have a problem
Join Date: Jul 2003
Location: Houston, TX
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
overreved does not mean you're screwed. A lot of BMW owners who does track driving does misshift sometimes, and I heard something a long time ago that the dealer/manufacturer cannot void the warranty based solely on the overrev code. I think there's even a lawsuit which rules in the customer's favor. Good luck!
#89
My bolonga has a 1st name
Thread Starter
Join Date: Oct 2001
Location: Fort Lauderdale, FL
Age: 39
Posts: 2,209
Likes: 0
Received 1 Like
on
1 Post
I actually did take it to Ferman Acura here in tampa, and there were a Class act. They did see the code, but instead of immediatly pointing fingers, the svc manager took it upon themselves to check the car to see if any damaged was caused by my mishap. They did a compression test and found NOTHING wrong with the car. Thats the way shit should be, ever since I had my CL before the TSX, i've had nothing but bad experiences from Fountain Acura in Orlando, the biggest bunch of fucking pricks you'll ever meet. I wouldn't even toss them a penny for thier thoughts.
#90
My bolonga has a 1st name
Thread Starter
Join Date: Oct 2001
Location: Fort Lauderdale, FL
Age: 39
Posts: 2,209
Likes: 0
Received 1 Like
on
1 Post
But the clicking is still there on the clutch, they swear its normal. but my friend who just bought an 05 6-spd doesn't have the sound... oh well with 2k left under the 50k warranty i'm just fucked into dealing with it until the clutch needs to be changed I guess.
#91
Driver/Detailer
Originally Posted by 97AcuraCL
But the clicking is still there on the clutch, they swear its normal. but my friend who just bought an 05 6-spd doesn't have the sound... oh well with 2k left under the 50k warranty i'm just fucked into dealing with it until the clutch needs to be changed I guess.
If your click is at the bottom of the clutch travel, it might point to the clutch master cylinder fault.
#93
Instructor
Join Date: Sep 2004
Location: St. Charles, MO
Age: 55
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 97AcuraCL
But the clicking is still there on the clutch, they swear its normal. but my friend who just bought an 05 6-spd doesn't have the sound... oh well with 2k left under the 50k warranty i'm just fucked into dealing with it until the clutch needs to be changed I guess.
#94
HOWARD911S
Join Date: Oct 2003
Location: los angeles
Age: 50
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
call AMERICAN HONDA at Torrance, CA, complain to them. They usually will bend their back over for you, my tech taught me that, he used to work at acura dealer. I had trouble where they wont fix stupid things it should be covered, slightest mention of making complain with american honda made them took it up and suck up the bill to fix for me
#95
Engineer
damn kurt, great advice and patience in this thread... its a pleasure to have someone as helpful as you on this board... you definitely are the "go to guy" on issues like these...
#98
TRUE THAT!!! FOUNTAIN ACURA FUKING SUX COCKWANK. they said there were no acura's in florida and they wanted me to pay MSRP. They wouldn't budge, so i'm like fuck you and i went to Ferman and got a cg navi ebony for fucking 27950 _|_ and they got it from miami. FUCK THEM!
#99
Moderator Alumnus
Join Date: Jul 2003
Location: Windsor-Quebec corridor
Age: 47
Posts: 7,709
Likes: 0
Received 6 Likes
on
4 Posts
Originally Posted by vpat25
TRUE THAT!!! FOUNTAIN ACURA FUKING SUX COCKWANK. they said there were no acura's in florida and they wanted me to pay MSRP. They wouldn't budge, so i'm like fuck you and i went to Ferman and got a cg navi ebony for fucking 27950 _|_ and they got it from miami. FUCK THEM!
Your momma should clean your mouth with a soap bar.
#100
Advanced
Join Date: Jul 2005
Location: Long Island, NY
Age: 40
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
I had a stang that had a problem with the clutch clicking. I know there very different cars. but my shifting fork was bent. part cost 15 bucks. unfortunately changing it is as involved as doing a clutch.
#101
I spend 2 much time here
Originally Posted by vpat25
TRUE THAT!!! FOUNTAIN ACURA FUKING SUX COCKWANK. they said there were no acura's in florida and they wanted me to pay MSRP. They wouldn't budge, so i'm like fuck you and i went to Ferman and got a cg navi ebony for fucking 27950 _|_ and they got it from miami. FUCK THEM!
#102
Banned
Join Date: Nov 2004
Location: Bushwhacked Land
Age: 50
Posts: 3,846
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sauceman
Uhmm, what's with the cursing? Clean up your language dude, there's no need for this.
Your momma should clean your mouth with a soap bar.
Your momma should clean your mouth with a soap bar.
#103
Instructor
Join Date: Sep 2003
Location: Toronto, ON
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Car should not be destroyed by <1% over REV limit x1
I'm not a mechanical engineer but I know your engine/tranny should not be destroyed by going 8434 RPM or 8455 rather than 8400 max once or even a few times.
If it is this car is a total piece of crap and we should all sue Honda for selling defective goods.
Don't fiddle with the ECU, call the Acura Hotline and the District Service Manager directly. Get their names and document all your conversations so we can read in detail about how well/poorly you were treated by Honda here.
As for going 96MPH you should point out that the speedo goes to 160. When the engine computer says you were going 170MPH for a few hours they have a reason to complain.
Acura needs to act like a real luxury car company.
If it is this car is a total piece of crap and we should all sue Honda for selling defective goods.
Don't fiddle with the ECU, call the Acura Hotline and the District Service Manager directly. Get their names and document all your conversations so we can read in detail about how well/poorly you were treated by Honda here.
As for going 96MPH you should point out that the speedo goes to 160. When the engine computer says you were going 170MPH for a few hours they have a reason to complain.
Acura needs to act like a real luxury car company.
#104
Advanced
Join Date: Oct 2004
Location: Minneapolis, MN
Age: 45
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by crfortin
As for going 96MPH you should point out that the speedo goes to 160. When the engine computer says you were going 170MPH for a few hours they have a reason to complain.
TZ
#107
CJAMS is at least sorta cool, i mean I know he has a wang cuz he hits on that tease all the time (the one whose name is associoated with boobs i forget her name)...but matelot is scrate homoerotic...w3rd
#108
Banned
Join Date: Nov 2004
Location: Bushwhacked Land
Age: 50
Posts: 3,846
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by vpat25
CJAMS is at least sorta cool, i mean I know he has a wang cuz he hits on that tease all the time (the one whose name is associoated with boobs i forget her name)...but matelot is scrate homoerotic...w3rd
#113
Senior Moderator
iTrader: (2)
Originally Posted by crfortin
I'm not a mechanical engineer but I know your engine/tranny should not be destroyed by going 8434 RPM or 8455 rather than 8400 max once or even a few times.
If it is this car is a total piece of crap and we should all sue Honda for selling defective goods.
Don't fiddle with the ECU, call the Acura Hotline and the District Service Manager directly. Get their names and document all your conversations so we can read in detail about how well/poorly you were treated by Honda here.
As for going 96MPH you should point out that the speedo goes to 160. When the engine computer says you were going 170MPH for a few hours they have a reason to complain.
Acura needs to act like a real luxury car company.
If it is this car is a total piece of crap and we should all sue Honda for selling defective goods.
Don't fiddle with the ECU, call the Acura Hotline and the District Service Manager directly. Get their names and document all your conversations so we can read in detail about how well/poorly you were treated by Honda here.
As for going 96MPH you should point out that the speedo goes to 160. When the engine computer says you were going 170MPH for a few hours they have a reason to complain.
Acura needs to act like a real luxury car company.
#114
Instructor
Join Date: Sep 2003
Location: Toronto, ON
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
TSX Cheesewagon
Originally Posted by JTso
It depends on the condition when the engine was over-revved. The engine can be destroyed even at lower rpm if the engine is low on lubrication, poor gas or other forms of mechanical failure. Also, just because the speedo is 160, it doesn't mean the equipment on the car will allow you to safely go that high or handle such high speed.
I know a stock TSX can't go 170 or even 160 unless dropped from a plane, my point is that they put 160 on the speedo without any warning. If they think going too fast (96MPH LOL) will destroy the car or make it so unsafe they should print a redline on the speedo too at 70MPH and put a limiter on that too so we can paint our TSXes yellow and call them schoolbuses.
& they can stop pretending to be a performance car company.
#115
Photography Nerd
Originally Posted by crfortin
I'm not a mechanical engineer but I know your engine/tranny should not be destroyed by going 8434 RPM or 8455 rather than 8400 max once or even a few times.
#116
Moderator Alumnus
Join Date: Jul 2003
Location: Windsor-Quebec corridor
Age: 47
Posts: 7,709
Likes: 0
Received 6 Likes
on
4 Posts
Originally Posted by crfortin
I know a stock TSX can't go 170 or even 160 unless dropped from a plane, my point is that they put 160 on the speedo without any warning. If they think going too fast (96MPH LOL) will destroy the car or make it so unsafe they should print a redline on the speedo too at 70MPH and put a limiter on that too so we can paint our TSXes yellow and call them schoolbuses.
Obviously, going at 96mph in 2nd is a misuse of the car, even though it was caused by a misshift. The redline is at 7100rpm on the tach. It is accompanied by a cutoff at 7300. What more does one need? Honestly, if you failed your engine because of a mis-shift, your own mistake, can you blame the constructor for that?
#117
Master Graphic Artist
Join Date: Oct 2004
Location: Northbrook, IL
Age: 40
Posts: 2,859
Received 0 Likes
on
0 Posts
Ah shitt.. I overrevved today when i misshifted from 6th to 2nd. Bad news because I rev matched to forth at around 6k so it jumped real fast over 8k. So far I don't know how far. But I checked engine and nothing smelled burnt out. Then I drove back to champaign and the engine ran smooth... so I'm assuming nothing is wrong. However does this void any warranty?
#118
Race Director
Originally Posted by PixelHarmony
Ah shitt.. I overrevved today when i misshifted from 6th to 2nd. Bad news because I rev matched to forth at around 6k so it jumped real fast over 8k. So far I don't know how far. But I checked engine and nothing smelled burnt out. Then I drove back to champaign and the engine ran smooth... so I'm assuming nothing is wrong. However does this void any warranty?
#119
Moderator Alumnus
Join Date: Jul 2003
Location: Windsor-Quebec corridor
Age: 47
Posts: 7,709
Likes: 0
Received 6 Likes
on
4 Posts
Originally Posted by PixelHarmony
Ah shitt.. I overrevved today when i misshifted from 6th to 2nd. Bad news because I rev matched to forth at around 6k so it jumped real fast over 8k. So far I don't know how far. But I checked engine and nothing smelled burnt out. Then I drove back to champaign and the engine ran smooth... so I'm assuming nothing is wrong. However does this void any warranty?
#120
Instructor
Join Date: Sep 2003
Location: Toronto, ON
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Wow ...
this board if full of people slagging the slushbox but the
Manual transmission sound like a real PITA to me. Skip a gear, void your waranty.
Glad I drive auto. Can use the manumatic if I'm bored and I can blame misshifts on a programmer in Japan.
What do you guys gain for all that right hand and heel and toe figiting anyways ? about 0.75 of a second 0-60 ?
& Can't we just have a button/toggle on the steering wheel for this shifting? Seems a little less 1950s.
Just MO, don't flame me or anything.
Manual transmission sound like a real PITA to me. Skip a gear, void your waranty.
Glad I drive auto. Can use the manumatic if I'm bored and I can blame misshifts on a programmer in Japan.
What do you guys gain for all that right hand and heel and toe figiting anyways ? about 0.75 of a second 0-60 ?
& Can't we just have a button/toggle on the steering wheel for this shifting? Seems a little less 1950s.
Just MO, don't flame me or anything.