My volks!!!
#56
I had to raise it up about an inch..thing is that I still rub..so later this week I will be grinding off the inner lip of my fenders to stop that. And now my car looks high to me so I am considering an OEM lip kit. Thanks sigmachi for linking the pix =)
#58
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Joined: Dec 2003
Posts: 43,655
Likes: 3,884
From: Mooresville, NC
Originally Posted by GSGOMEZ
Nice!!!! I am sure that wheel looks good on CG!
#59
Originally Posted by Stokeless_TSX
I had to raise it up about an inch..thing is that I still rub..so later this week I will be grinding off the inner lip of my fenders to stop that. And now my car looks high to me so I am considering an OEM lip kit. Thanks sigmachi for linking the pix =)
#60
Originally Posted by Stokeless_TSX
I had to raise it up about an inch..thing is that I still rub..so later this week I will be grinding off the inner lip of my fenders to stop that. And now my car looks high to me so I am considering an OEM lip kit. Thanks sigmachi for linking the pix =)
#62
Originally Posted by JTso
Remember I tried to warn ya about the 235 width tires for your ride height? Perhaps Discount Tires will let you switch to 225? They did for me...
#63
Originally Posted by Stokeless_TSX
I was extremely low...I am gonna grind off the inner lip of the fenders tonight.
Where is the rubbing? Front or rear? From looking at the pic, you have a rear camber kit, don't you? Ingall or something like the Comptech (SPC) one?
If the rubbing you're talking about in from the front, you can remove the clips for the inner fender liner. Then put the fender liner behind the metal tabs. This will eliminate some rubbing, however it doesn't prevent the tire from rubbing the fender when the front wheels are turned and the suspension being fully compressed.
#64
Oh I was over 2.5 drop maybe 3. And its not the liner thats rubbing I took that completely out already. It is the lip on the fender itself. I am going to gring the lip and put touch up paint on it so it wont rust. Hopefully get to it tonight.
#66
Originally Posted by CCColtsicehockey
I am thinking that a set of silver te37 would look good on CG that is what i am leaning towards
#72
Originally Posted by Benz_05_TSX
That's a 2.5 inch drop??....... doesn't look like it......but..maybe it will look even lower with the kit......y not get a Mugen kit?
mine is only lowered about 1.8inches.
:troutslap
#73
It was about 2.5 to 3 inch. Maybe even more. I raised it up 4 turns in the front and 3 in the back and it still is lower than all the eibach pro kits i have seen. It rubs on the outer lip of the fender. I am getting them rolled soon.
I will tint the ride eventually. Just isnt a big priority for me. I have 3 cars and I am modding 2 of them so yea tint isn't very high on my list.
I will tint the ride eventually. Just isnt a big priority for me. I have 3 cars and I am modding 2 of them so yea tint isn't very high on my list.
#75
Originally Posted by CCColtsicehockey
I am thinking that a set of silver te37 would look good on CG that is what i am leaning towards
pm me if you are interested.
#77
Originally Posted by Benz_05_TSX
Whats the other two then??
Thread
Thread Starter
Forum
Replies
Last Post