on3_mike

im getting my very first mod for my 06 TSX... What should I get? I was thinking of getting an intake first of all but I dont know which... any suggestions?

SeanS627

it all depends on your budget

less than $200 i'd say RSB or intake

less than $500 i'd say both above or Hondata

TacoBellSauce

or a supercharger if its above $4000

clee109

The intake I see being ran the most on here are:
Injen
K&N Typhoon
AEM

I personally have the injen and love it, nice sound. However; intake is more about sound than anything, just like exhaust. A great mod to the TSX is RSB and Hondata. RSB is of course the cheaper of the two and will greatly reduce body roll and understeer and has a high fun factor. Hondata completely remaps your ECU, which boosts power noticably but costs a pretty penny!

S14 n Tsx

You want comptech stuff.. get it now. they are closing down.

larsenvega

Tint would be a good place to start, then a lip spoiler or wing depending on your style preference. I did 15% tint all around, and a gave it a factory spoiler within days of picking mine up. I plan on doing an Injen CAI and other engine mods only after my factory warranty expires.

crazybaboon6000

My first mod was putting tints on my car, followed by an Injen SP1431 cold air intake install. The cold air intake does NOT void your warranty as stated by many different acura dealerships. It only voids the warranty if it is the direct cause of a problem on your engine e.g. Hydrolocking, but if something goes wrong elsewhere in the engine, and the intake is not the cause, then the problem will be fixed under warranty.

rza49311

iTrader: (1)

my first mod was a clear bra but thats not so cheap

TSeXaholic

yeah my first mod was 20% tint all around... followed by the 06 oem lip kit, and then my injen cold air.... come one guys what should i get next?? (hondata?) but like i said in other post i find it complicated to come about. or maybe save up and buy my tanabe sustec pro II coils?

taz98spin

Yup! Mine was a clear bra too!

LoveMyTL-S

My first mod was the throttle body bypass. Under $10.00 and took all of 20 minutes to complete. Next was Injen CAI. Main thing is to have fun doing it yourself.

joerockt

Stretching the Mod definition a bit there...

on3_mike

got the tint... got the m3 lip... aiming for injen or
fujita intake!

sluggercz

For my first mod, which I'm installing this weekend!, I bought a Progress Rear Sway Bar.
Hopefully installation goes smooth, I will post this weekend on it.

vidgamer

If I have to spend 5 hours working on the car, I'm gonna count it!

Let's just call it an "appearance mod" as opposed to a "performance mod".

SeanS627

mine would have been a set of headrest tvs with a built in dvd player

$1700 to please my 2 year old

Excelerate

iTrader: (1)

I would go with the Injen CAI if you were interested in an intake. You can convert it to a short ram or keep it a cold air. PM me if you want one.

lito

DEBADGE that bad boy to a "Honda"