MD/VA/DC/PA June/July Install Meet & BBQ
#83
Team Owner
Thread Starter
Join Date: Feb 2006
Location: District of Corruption
Age: 36
Posts: 23,588
Received 105 Likes
on
69 Posts
Originally Posted by CGTSX2004
3 CGPs...
Haven't done one of these in a while so I look forward to it.
Though seriously, is it possible to get this in a parking structure of some sort? It's gonna be hot outside...
Haven't done one of these in a while so I look forward to it.
Though seriously, is it possible to get this in a parking structure of some sort? It's gonna be hot outside...
Technically speaking, it was one 04 CGP TSX, three 06 CGP TSX's, one NBP 06 TSX, one SSM 04 TSX and one PWP 04 TSX
#84
Team Owner
Thread Starter
Join Date: Feb 2006
Location: District of Corruption
Age: 36
Posts: 23,588
Received 105 Likes
on
69 Posts
Originally Posted by lcrazyaznl
For the most part i should be there! from ny...
says 4hrs 30 mins weee
Lets say i get there in 4 hours lol...
says 4hrs 30 mins weee
Lets say i get there in 4 hours lol...
#85
Three Wheelin'
Join Date: Jun 2006
Location: Philadelphia Burbs
Age: 41
Posts: 1,727
Likes: 0
Received 0 Likes
on
0 Posts
OK fellas,
I def want to do this and that little picture was some helpful motivation Although, i don't have anything i need to install at this time i will be glad to help out
Here is what i'm looking to try and do. Since it will be about a 3-3.5 hrs drive, i was actually think about heading down friday night and grabbing a cheap hotel room and maybe hit the town since i haven't gone out down there before. So i have a few questions for ya. One, would anyone fron PA, NY, or NJ want to head down friday night as well and maybe split the hotel bill, and two, anyone know of any good places to hit up at night?!? PM if anyone is interested in heading down friday night.
Has the location been set in stone yet, i'm being lazy?!
I def want to do this and that little picture was some helpful motivation Although, i don't have anything i need to install at this time i will be glad to help out
Here is what i'm looking to try and do. Since it will be about a 3-3.5 hrs drive, i was actually think about heading down friday night and grabbing a cheap hotel room and maybe hit the town since i haven't gone out down there before. So i have a few questions for ya. One, would anyone fron PA, NY, or NJ want to head down friday night as well and maybe split the hotel bill, and two, anyone know of any good places to hit up at night?!? PM if anyone is interested in heading down friday night.
Has the location been set in stone yet, i'm being lazy?!
#86
Team Owner
Thread Starter
Join Date: Feb 2006
Location: District of Corruption
Age: 36
Posts: 23,588
Received 105 Likes
on
69 Posts
Originally Posted by jwood_06TSX
OK fellas,
I def want to do this and that little picture was some helpful motivation Although, i don't have anything i need to install at this time i will be glad to help out
Here is what i'm looking to try and do. Since it will be about a 3-3.5 hrs drive, i was actually think about heading down friday night and grabbing a cheap hotel room and maybe hit the town since i haven't gone out down there before. So i have a few questions for ya. One, would anyone fron PA, NY, or NJ want to head down friday night as well and maybe split the hotel bill, and two, anyone know of any good places to hit up at night?!? PM if anyone is interested in heading down friday night.
Has the location been set in stone yet, i'm being lazy?!
I def want to do this and that little picture was some helpful motivation Although, i don't have anything i need to install at this time i will be glad to help out
Here is what i'm looking to try and do. Since it will be about a 3-3.5 hrs drive, i was actually think about heading down friday night and grabbing a cheap hotel room and maybe hit the town since i haven't gone out down there before. So i have a few questions for ya. One, would anyone fron PA, NY, or NJ want to head down friday night as well and maybe split the hotel bill, and two, anyone know of any good places to hit up at night?!? PM if anyone is interested in heading down friday night.
Has the location been set in stone yet, i'm being lazy?!
Should be a great turnout!
#87
Three Wheelin'
Join Date: Feb 2007
Location: Rockville, MD
Age: 40
Posts: 1,554
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jwood_06TSX
OK fellas,
I def want to do this and that little picture was some helpful motivation Although, i don't have anything i need to install at this time i will be glad to help out
Here is what i'm looking to try and do. Since it will be about a 3-3.5 hrs drive, i was actually think about heading down friday night and grabbing a cheap hotel room and maybe hit the town since i haven't gone out down there before. So i have a few questions for ya. One, would anyone fron PA, NY, or NJ want to head down friday night as well and maybe split the hotel bill, and two, anyone know of any good places to hit up at night?!? PM if anyone is interested in heading down friday night.
Has the location been set in stone yet, i'm being lazy?!
I def want to do this and that little picture was some helpful motivation Although, i don't have anything i need to install at this time i will be glad to help out
Here is what i'm looking to try and do. Since it will be about a 3-3.5 hrs drive, i was actually think about heading down friday night and grabbing a cheap hotel room and maybe hit the town since i haven't gone out down there before. So i have a few questions for ya. One, would anyone fron PA, NY, or NJ want to head down friday night as well and maybe split the hotel bill, and two, anyone know of any good places to hit up at night?!? PM if anyone is interested in heading down friday night.
Has the location been set in stone yet, i'm being lazy?!
#88
Team Owner
iTrader: (1)
Originally Posted by jwood_06TSX
OK fellas,
I def want to do this and that little picture was some helpful motivation Although, i don't have anything i need to install at this time i will be glad to help out
Here is what i'm looking to try and do. Since it will be about a 3-3.5 hrs drive, i was actually think about heading down friday night and grabbing a cheap hotel room and maybe hit the town since i haven't gone out down there before. So i have a few questions for ya. One, would anyone fron PA, NY, or NJ want to head down friday night as well and maybe split the hotel bill, and two, anyone know of any good places to hit up at night?!? PM if anyone is interested in heading down friday night.
Has the location been set in stone yet, i'm being lazy?!
I def want to do this and that little picture was some helpful motivation Although, i don't have anything i need to install at this time i will be glad to help out
Here is what i'm looking to try and do. Since it will be about a 3-3.5 hrs drive, i was actually think about heading down friday night and grabbing a cheap hotel room and maybe hit the town since i haven't gone out down there before. So i have a few questions for ya. One, would anyone fron PA, NY, or NJ want to head down friday night as well and maybe split the hotel bill, and two, anyone know of any good places to hit up at night?!? PM if anyone is interested in heading down friday night.
Has the location been set in stone yet, i'm being lazy?!
#89
Instructor
Will anybody at the Meet & Greet be able to help me install a KP Tech One Touch Sunroof module? And when I say help I basically mean do everything since I am retarded when it comes to electronics and car mods.
#90
Team Owner
iTrader: (1)
Originally Posted by tsxinva
Will anybody at the Meet & Greet be able to help me install a KP Tech One Touch Sunroof module? And when I say help I basically mean do everything since I am retarded when it comes to electronics and car mods.
#93
Senior Moderator
^ + radioshack's red T-taps if you want me to do it in a jiffy. and the directions!
Guys, I'm willing to forgo some of my own stuff and help do a lot of electronics, but we will be limited to what we have on site.
Everyone do not forget to bring some tools, especially if you plan on jacking up your car, you'll need to source a jack and some stands!
I still haven't heard of a better location (that won't kick us out) so I'm going to set this one in stone. Yes, its an open surface lot, it will be hot! Bring lots of water and some snacks, and try to bring something to share!
I am updating the first page with the location.
Guys, I'm willing to forgo some of my own stuff and help do a lot of electronics, but we will be limited to what we have on site.
Everyone do not forget to bring some tools, especially if you plan on jacking up your car, you'll need to source a jack and some stands!
I still haven't heard of a better location (that won't kick us out) so I'm going to set this one in stone. Yes, its an open surface lot, it will be hot! Bring lots of water and some snacks, and try to bring something to share!
I am updating the first page with the location.
#97
2nd Gear
Join Date: Jun 2007
Location: Ho Co, MD
Age: 55
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I'm planning on attending. I just got my TSX earlier this week, it's a used 2004, and it's in awesome shape.
This is my 4th car from the Honda / Acura family (but my first TSX). I'd love to see what types of mods people have done to their cars, I'm especially interested in adding the AUX-IN for a MP3 player and Sirius.
Hope to see everyone there!
This is my 4th car from the Honda / Acura family (but my first TSX). I'd love to see what types of mods people have done to their cars, I'm especially interested in adding the AUX-IN for a MP3 player and Sirius.
Hope to see everyone there!
#98
Team Owner
iTrader: (1)
Originally Posted by xizor
man! i wish I could come, this is literally just down the road from me, but its my wife's company summer picnic. if you're there at 9am then I can swing by, or if you're still there till 7pm like our install meets usually go.
#100
Team Owner
iTrader: (1)
Originally Posted by rza49311
Damn, this meet is gonna be big. I'm on the fence....its a 3 1/2 hour drive or so. I got a short shifter that needs installing too. I'll have to decide after this weekend.
Plus, we can get a TSX shoot for Ron of his hottest new wheels.
#101
Team Owner
Thread Starter
Join Date: Feb 2006
Location: District of Corruption
Age: 36
Posts: 23,588
Received 105 Likes
on
69 Posts
Originally Posted by CGTSX2004
Come on up and we'll help you install it.
Plus, we can get a TSX shoot for Ron of his hottest new wheels.
Plus, we can get a TSX shoot for Ron of his hottest new wheels.
To think...a full day of pictures. I think I'm already getting excited LOL.
#102
I already got some stuff install install this weekend. So I will bring the EuroR pedals, Progress RSB with Blox racing endlinks and oil catch can. Dammit I want the 06 JDM headlights and no one has it in stock and I can't wait 4-6 weeks for it. I am still debating on whether I should debadge or not. NE1 have a cordless electric drill they can bring cause I have the drill out the pedals.
#103
Originally Posted by jwood_06TSX
OK fellas,
I def want to do this and that little picture was some helpful motivation Although, i don't have anything i need to install at this time i will be glad to help out
Here is what i'm looking to try and do. Since it will be about a 3-3.5 hrs drive, i was actually think about heading down friday night and grabbing a cheap hotel room and maybe hit the town since i haven't gone out down there before. So i have a few questions for ya. One, would anyone fron PA, NY, or NJ want to head down friday night as well and maybe split the hotel bill, and two, anyone know of any good places to hit up at night?!? PM if anyone is interested in heading down friday night.
Has the location been set in stone yet, i'm being lazy?!
I def want to do this and that little picture was some helpful motivation Although, i don't have anything i need to install at this time i will be glad to help out
Here is what i'm looking to try and do. Since it will be about a 3-3.5 hrs drive, i was actually think about heading down friday night and grabbing a cheap hotel room and maybe hit the town since i haven't gone out down there before. So i have a few questions for ya. One, would anyone fron PA, NY, or NJ want to head down friday night as well and maybe split the hotel bill, and two, anyone know of any good places to hit up at night?!? PM if anyone is interested in heading down friday night.
Has the location been set in stone yet, i'm being lazy?!
#104
Three Wheelin'
Join Date: Jun 2006
Location: Philadelphia Burbs
Age: 41
Posts: 1,727
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the replies guys! I will be PM'ing a few of you once i get my plans straight this weekend
Also, let me know what kind of tools we need and i'll see what i can bring!
Also, let me know what kind of tools we need and i'll see what i can bring!
#105
Team Owner
Thread Starter
Join Date: Feb 2006
Location: District of Corruption
Age: 36
Posts: 23,588
Received 105 Likes
on
69 Posts
Originally Posted by CGPTSX06
I already got some stuff install install this weekend. So I will bring the EuroR pedals, Progress RSB with Blox racing endlinks and oil catch can. Dammit I want the 06 JDM headlights and no one has it in stock and I can't wait 4-6 weeks for it. I am still debating on whether I should debadge or not. NE1 have a cordless electric drill they can bring cause I have the drill out the pedals.
You have one other thing to install at the meet as well
#106
Three Wheelin'
Join Date: Jun 2006
Location: Philadelphia Burbs
Age: 41
Posts: 1,727
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by EuRTSX
You have one other thing to install at the meet as well
#109
Originally Posted by EuRTSX
Well, that's not what I meant, I meant, you have a new "something" to install on YOUR front end
#110
CL9 ABP
iTrader: (1)
Join Date: Feb 2005
Location: Commack, Long Island -> Queens NY
Age: 37
Posts: 4,528
Received 245 Likes
on
112 Posts
I can bring my rachet set, and some other stuff
the bottom wind deflector if anyone needs it
h11 stock bulbs
nokya h11 yellow bulbs
4 oem stock new spar plugs
the rear reflectors on our bumper
what else...
ahah
the bottom wind deflector if anyone needs it
h11 stock bulbs
nokya h11 yellow bulbs
4 oem stock new spar plugs
the rear reflectors on our bumper
what else...
ahah
#114
I haven't bought my brakes yet but I don't have any tools for it since they are all in Charlotte. Could someone hook a brother up with some jacks, tools, clamps so I can get that done?
SHYU, you going to get some brakes? We can do them together if you buy.
SHYU, you going to get some brakes? We can do them together if you buy.
#116
J M U ... DUUUKEESSSS
iTrader: (1)
Originally Posted by Savio
I haven't bought my brakes yet but I don't have any tools for it since they are all in Charlotte. Could someone hook a brother up with some jacks, tools, clamps so I can get that done?
SHYU, you going to get some brakes? We can do them together if you buy.
SHYU, you going to get some brakes? We can do them together if you buy.
Sounds good, ordered some Hawk HPS pads yesterday from MrHeelToe,
Originally Posted by jwood_06TSX
20 mins
#117
Originally Posted by SHYUperman
Sounds good, ordered some Hawk HPS pads yesterday from MrHeelToe,
what made you go with the HPS over the Ceramics? I'll put in my order tonight.
What's the address of this place so I can put it in my Nuvi?
#118
J M U ... DUUUKEESSSS
iTrader: (1)
Originally Posted by Savio
what made you go with the HPS over the Ceramics? I'll put in my order tonight.