Wassup guys..We have droppped the first kit design and started on a completely new design for the first gen TLs. I'll try to keep you guys informed.

1. The eyelids are completed, but will not be available until the release of the bodykit and wing.

2. Bodykits will be made for the 3.2 and the 2.5... similar designs will be used but 2 different fronts.

3. Rear spoiler will be a lip wing similar to our wing for the 01-04 Honda Civic coupe wing. http://www.inspiredmotorsports.com/01civic.htm

==>>No eta, nor sneek peeks until I post here. sorry guys...<<==

http://www.InspiredMotorsports.com

Also, can you guys do me a favor by letting me know who is interested in any of these future products? I might be willing to co-sponsor a car or two in the future. Thanks

Edit: *Update 11.17.03* Still in design phase. Photos of the progress as of now is available.
http://www.InspiredMotorsports.com/ua123.htm

Edit: *Update 12.11.03* Still underdevelopement. Added some new photos of the final design of the front lip.
Same link as above: http://www.InspiredMotorsports.com/ua123.htm

 

im interested but as always, depends on how it looks

 

ya keep us posted...

 

 

Hope it doesnt look anything remotely similar to the hideous kits that jtautostyle.com and andysautobody has. =| jt's kit is something i would want if i were rallying with the evo's and wrx's. Andy's kit is just a big bubble butt and its ugly.

Please make it sleeeeeeeeeeeeeeeeeek =)

 

i like that wing alot to bad i already have the OEM wing its fine enough for me right now.

 

I'm definitely down to get the lip. Just as long as it doesn't cost as much as a value lip.

 

any estimate price range yet?

 

Well, the kits for the other cars are around $500 for rear and $500 for front, and $300 for sides, $1100 for entire kit...

 

that is alot like 2 years ago
i had a crx and paid $500 shipped for a wings west RS kit

 

yeah, no front LIPS are 500 or so unless its carbon fiber or something? everything for our cars are expensive, even the ones t hat are available in the US b/c one, our cars are a luxury car, and 2 the demand for our cars is low.

 

Yeah, I was just trying to show how the other aero parts were. A lip *theoretically* should be less than a whole front bumper. Lets hope...

 

will it look luxury or sport?

 

We are trying to get alittle of both. More towards the JDM "VIP" look.

 

On the previous posts regarding the price:

The price is yet to be determined. The final cost of production is yet to be determined so I can't give you guys an exact number...

 

Prototype look sooo much better. If the price is right, I would consider purchasing one...

 

Please please build the new one you guys will then have the only good looking kit in the states. And i think the best looking one ive seen yet for the 1st gens

 

Anxious to see the new kit... If I like it, definately intersted, as long as it won't cost me an arm and a leg to ship it up to Canada. You wanna sponsor a Canadian car?!

 

Info: To clear up the questions regarding the muffler setup from a different forum, I will post here also.

In regards to the question about the muffler*:

There are a total of 4 setups on the design. The rear lip will come with a single 5" exhaust opening. The actual part has the other optional sizes within that part. Grooves in the inner part is the guide to show where to cut in order to fit the other 3 optional exhaust setups. It's hard to explain, but when we have the products ready, I'll post the photos.

1. single exhaust tip (up to 4.5" tip)
2. dual exhaust tip ( up to 8.5" tips)
3. dual muffler - single tips (up to 4.5" tips)
4. dual muffler - dual tips (up to 8.5" tips)

*note: The muffler(s) will have to be relocated.

 

Update: new photos. Look at first thread.

 

Nice work, hope the price is affordable. I will definitely consider adding this kit to my mod list. Keep up the good work fellas, and keep us posted.

 

Sexy.

 

 

:hitit:

 

I am very interested in getting a lip kit for my tl, that's the one thing i have left for the outside, please keep us posted and let us know, i hope it doesnt cost too much

 

repost of development photos due to server crash:



http://www.InspiredMotorsports.com/ua123.htm