Got Custom Trunk?
#41
Banned
Originally Posted by TLBaller
you know? I have a sub that I am planning on putting in and since our seat don't fold down, I was going to have a ported box built so the ports are pointing upward through the 6x9 grill (planning taking out the 6x9s). It will shoot through the grill, onto the rear windsheild into the cabin of the car. Either that or have the port shoot through the ski slot. Which do you think?
#42
Banned
Originally Posted by TLBaller
yeah but where? I'm thinking the best place is here
#44
giggity giggity giggity
Join Date: Aug 2002
Location: MontCo, PA
Age: 40
Posts: 3,217
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TLBaller
yeah but where? I'm thinking the best place is here
#45
i was thinking that location too but running the wires there would be a bid diff..i think? You can't go wrong with audio b/c you can take it with you when you sell the car unless its a hassle to take out custon installs.
#46
Overland Park, KS
Join Date: Dec 2005
Location: Overland Park, KS
Age: 41
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
hah, i've been wondering what those were by the dome light. i'm like these look like speakers but i swear i don' thear shit coming from them. the kenwood components i bought fit perfectly in the front window tweet spots, that's where i'm keeping mine. i didn't put the crossover on yet so i get some crackling at higher volumes, but it's pretty temp for the time being.
#48
Overland Park, KS
Join Date: Dec 2005
Location: Overland Park, KS
Age: 41
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
no no i put the kenwood component tweets in the corners in the front by the windshield. those just popped out and were pretty much a perfect swap.
#52
Overland Park, KS
Join Date: Dec 2005
Location: Overland Park, KS
Age: 41
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
yah that's what we did. they just popped out. i will say that they didn't snap back in so i just got some double sided tape to hold them back in. the driver side one was a bitch because there's some kind of sensor or something in there and the angle of the windshield was hard to get it back in, but none the less...
it's possible we broke something since as much as i could study it, there wasn't anything else to snap back in to.
it's possible we broke something since as much as i could study it, there wasn't anything else to snap back in to.
#53
so they do pop off? did you use a flat head screwdriver? wow of all these years of being a member of this board, i didn't know that! Forums are great, aren't they??
oh and that black sensor thing adjust the hotness/coldness of the ac/heater by the temp of the inside of the car.
oh and that black sensor thing adjust the hotness/coldness of the ac/heater by the temp of the inside of the car.
#54
Overland Park, KS
Join Date: Dec 2005
Location: Overland Park, KS
Age: 41
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
yah i just tried to do it as careful as possible and as straight up as possible, but like i said... they didn't snap back in or anything and as far into the hole and on the piece that comes out, i didn't see any snaps or anything like that. i couldn't even see any signs of me breaking anything, so i dunno what to say. just used some double sided tape and it's fine. not like it's a door speaker or sub that's gonna rattle if it's not secure.
#55
Instructor
Thread Starter
Originally Posted by TLBaller
so they do pop off? did you use a flat head screwdriver? wow of all these years of being a member of this board, i didn't know that! Forums are great, aren't they??
oh and that black sensor thing adjust the hotness/coldness of the ac/heater by the temp of the inside of the car.
oh and that black sensor thing adjust the hotness/coldness of the ac/heater by the temp of the inside of the car.
Actually that sensor is for the temperature outside, the sensor for inside your car is the little vent to the right side of your steering wheel embedded into the wood trim.
#57
Instructor
Thread Starter
It doesn't have any display for the outside temp. I have no idea what it's for, I just know that the one on the windshield is for the outside temp. When you press the button "AUTO" and adjust the knob to the right temperature, your car automatically put more heat, or take out heat to get it to your desire temperature.
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
07-16-2017 07:33 AM
Yumcha
Automotive News
1
09-25-2015 06:14 PM
justin.w13.walker
Car Parts for Sale
0
09-22-2015 02:21 PM