Stainless Steel Exhaust Tips for 99 RL
 

Not stainless steel, but I have 13'' long Magnaflow daul 3'' chrome tip. It looks good lol. I don't have pics on this laptop, but I'll post it tomorrow.

I got only one pic. I couldn't find the other. I need to take some new pic of the tip.[IMG]http://img687.imageshack.us/img687/7725/28440575.jpg Uploaded with ImageShack.us[/IMG]

Looks good. 13" is long. How far is the tip from the bumper? Any bumper melting issues?

The stock tip on my 96 was around 8 or 9'' long, I'm not sure. I just cut the stock tip off and added a little extension so the new tip slightly passed the bumper. I had a magnaflow muffler with the same tip, but it was too loud so I took it off. Anyway, it has been there for almost a year now and it is not melting the bumper:tongue: I'll take pic from the rear so you can get an idea how big the tip is. I'll post it tonight if I have time lol

Here you go!
[IMG]http://img805.imageshack.us/img805/9997/img0778f.jpg Uploaded with ImageShack.us[/IMG]
[IMG]http://img515.imageshack.us/img515/7852/img0776d.jpg Uploaded with ImageShack.us[/IMG]

Thanks for the pics. It looks like the tips are touching each other. I am looking for something to put over my existing pipes. I will prefer not to do any welding. Based on the info you provided, I will look for something less that 3" in diameter. Thanks again.

If you don't want to weld, you could go to any auto stores and get a 2.5-2.7'' tip and screw to the oem tip. I did that before lol, but I didn't like the way it came out.

I like your smoked out turn signals!

Thanks. But I'm going to put on an 03-04 taillights. I got the taillight already, but I never have the time to do some custom work. I was so busy installing my type s speakers and repainting my front lip.:tongue: