qsgreencl

So i finished up some projects Friday and decided to take some pictures today. Everything will be coming off soon and the projectors will be redone along with the high beams.I'm no photographer so the pics aren't the best.






The pictures really don't do the car any justice. I need to find a better photographer.

spencer_homer

what kind of rear lip is that?


and did u do a full retro fit? or what? more pics of the headlights

what projectors did u use?

qsgreencl

They are valeo projectors the lip is for a 94-97 accord i forget the name.Im not sure what you mean by full retro. I did not use a shroud because i got alittle over excited and didnt want to wait another week or more for them to come. When i redo them over the winter they will be done with shrouds.

Blind_Shooter

looks cool whered you get the rear lip??

qsgreencl

ebay

XxAtTheGatesxX

It's best not to rush projects.

Looks pretty good though. Did the lip need any modification done to it?

97BlackAckCL

iTrader: (6)

Love the rear lip, but should have done the bezel on the projector

qsgreencl

The rear lip bolted right up fine. And as for the projectors i have a set of headlights im putting on for the winter. So over that time they will be done again and with a few more surprises.

*BAY*CL

Nice ass! haha i like what you've done to the cl so far.. looks clean

qsgreencl

Thanks

asianspec

iTrader: (1)

me likey.

AcAttAcK98

iTrader: (1)

Dude, I'm in love with those acura caliper stickers.. Secondly.. The rear lip looks cool.. It goes nicely with your front lip.. I'm impressed.. How much did it run you including shipping? I personally would have to get a WW rear lip because it flows nicely with the front lip..

Projectors look good too.. A shroud would really set it off..

A rear spoiler would set it off nicely.. I think you should look into that.. just my

qsgreencl

I think the rear lip came to like 140 shipped.

GianJ30a

i second that, how did u do that?

97BlackAckCL

iTrader: (6)

What ballasts and bulbs are you using? Did you get relay harnesses, or make your own?

qsgreencl

Im using the same hid kit i was using before.Its an ebay kit. I've been searching for upgrades but i dont know what to use.

klepto

I like the projectors but the rear lip looks kind of high. It's weird to see the stock exhaust not even be able to fill out the cutout well enough

Gnate

iTrader: (10)

What brakes are those?

qsgreencl

Yea i mounted it there because i didn't want to have to cut where the exhaust is. You cant even fit a finger on any side of it.

qsgreencl

drilled rotors,painted calipers with ACURA decals, and soon to have stainless steel lines.

AznX TL

man your car is coming along VERY nicely.

qsgreencl

Thanks man i would love to check out the accord in person. We need to have another meet but a little bit further in PA so we can get more people from both sides

unlewser

looks good, what shrouds do you plan on using?

qsgreencl

something like these
http://cgi.ebay.com/ebaymotors/_Car-...=p4506.c0.m245

XxAtTheGatesxX

Is that rear lip polyeurothane or plastic?

GianJ30a

wouldnt the decal melt off? is it a special kind?

qsgreencl

nope they've been on for a while. they lasted through both summer and winter

unlewser

good thinking

fliplyricist1

great stuff man...in fact I was JUST thinking how the 94-95 mugen style accord rear lips would look on our cars...you pulled it off nicely

and to those who are wondering whether its urethane or abs, it's abs. And with our cars, ABS is much easier and cheaper to modify for the rear lips since you're gonna have to trim some of the lip in the middle to fit. Then from there it's easy just use some ABS cement to bond the two pieces back together and sand. With urethane it's nearly impossible for you to bond the two pieces together yourself, and shops will charge you out the ass to do it.


could you do me a favor and tell me how much lower the rear mugen lip sits than the stock lip? Thanks

qsgreencl

Only like a inch or two the way i have it sitting now.i could bring it down some if i cut the exhaust cutout but i like how it fits in there.

97Acura3.0CL

dude I wish I knew that you needed a pair of those shrouds I just sold a pair for 80 shipped REAL OEM

I would be aware of replicas. they are not always good replicas.

I have more parts if you need some, I have one shroud left of the real deal e46 xenon trim. but I also have other trims too, I can also cut things out of other housings. email me and I can let you know what I have joseph.j.giguere@erac.com

klepto and 97BlackAckCL can vouch for me I am the one of the founders of projector mods to the CL with VXCL (he got me into it and I continue to sell parts)

it looks like you have a valeo projector right? am I mistaken, from your first picture I can see almost a top and bottom shield, I have a pair just like that which is D1S, did you do D1S or d2s? hit me up I can give you some tips to get more color and make it look more OEM

South Jersey CL

lookin good man, cant wait to see it in person

97BlackAckCL

iTrader: (6)

i really like that rear lip, I wonder how it would line up with a ww lip

qsgreencl

when you coming back up