97Acura3.0CL

These are pics from CiLver2.3

Thanks for taking pics denis

we had a nice turn out and about 12 people showed up

we had 4 first gens repreesenting, Me, 1st_gen, acura1983, and Rondizzle , but the primrose CL was out in front


nice to see your car in person David adn nice to meet you

Pics:


Me and 1st_gen


Me


Sorry Jayson, I never seen soemthing like this before I just had to share it


Rondizzle


acura1983, the feature 1st gen of the day, these are some great detailed pics of Davids car, and i have to say it is very nice and you did a very nice job in molding the kit to keep the curves of the bumpers but i have to say that the flares on the side of the front bumper dont flow with the skirts and it you took it down a bit like a 1/4 or 1/2 inch on the bottom flares you will have a much smoother continuous look and get those door guards off

but it was nice to meet you and check a look at your awsome creation, nice work

1st_gen

lol yeah he supposed to straighten it out when he has time at the shop at the time he was busy anf=d i wanted it angeled he was like jus do it like this then heel straighten it out when hre has time

1st_gen

alot oh nissans came out

97Acura3.0CL

cars:
1 infinity g35 with 19x10 and 19x9 PIAA rims
2 350z's
2 SC'ed CL-S, Manual and triptronic both
1 Infinity Sedan
2 TL's
4 First Gens

97Acura3.0CL

davids pics that didnt work

baka_t

I would like to see more pics of acura1983. N/m he just posted it. That car is pimp.

klepto

lookin good guys, are those c5's 18s?

baka_t

I'm thinkin 18"'s but with the drop it looks like 17's.

DigiBox

They are 18's. Just a low pro tire on them.

baka_t

I figured they were 18"s i think they would look bigger if the car was lower.

acura1983

thanks fellas!!!thanx 97Acra it was fun, we'll meet again soon!.......alot a work was put into it...and if i was too lower it ne more i wood have to remove my back seat to fit my front kit wen it falls off...i've cracked, scratched, and smashed this kit numerous times...(baka_t i hate speed bumps with a passion,too)but they are 18s..phatass gap but wat can u do...

baka_t

Thats why i'm investing in air ride before i make my full front kit. Don't wanna crack or scrape anything.

acura1983

hows hawaii roads?

baka_t

Pretty bad nowdays because of all the rain. They usually try to fill the pot holes but its a no no to run 35 series tires in the areas that i drive in daily. To date, I only had a bent control arm and alot of scraped plastic.

Katies99CL

i really like the back...and the front...well, it's starting to grow on me

97Acura3.0CL

its the drift kit that is taken the bottom half of the kit and molded it to the stock bumper

and i think he said the rear is the stock lip but he took an extra lip and molded the sides to extend them lower????

David, How did you do the rear again?

99Black3.0

lookin good, the weather looks great!

Cocoa

iTrader: (2)

Acura1983, I really like that kit you have. Very nice....what rear bumper/lip is that?

97Acura3.0CL

i cant remember how he told me the shop did it

dennis

What the hell is up with Jayon's exaust...literally?

DigiBox

I can't remember the exact manufacturer, but I believe it was some kind of prelude lip. The stock lip was remade in fiberglass and the corners of the prelude lip were cut. They were all glassed together. It looked VERY nice.

bryanz3.0cl

what rims on the car in the 1st pic?

AcUrALiTy

damn, nice cars, i like the kitted CL as well as the silver one with black rims, now i really wanna paint mines black

97Acura3.0CL

those are powdercoated 2.2 rims in black

they look real nice

1st_gen

naw those are powder coated 94 accord rims i traded it for the stok cl rims cuz the cl rims are jus fugly..

97CLgenius

Me see no pics

acura1983

i actually took a prelude rear bodykit and cut the sides off(where it comes down) and copied the stock addon with fiberglass and molded it on so that it went with the stock addon.....some sanding and ichty ass fiberglass and wah lah..custom rear.. i did the same to the front...sideskirts WW from accord....

superj721

nice pics-clean cl's

OUTRAGEOUS CL TYPE S

hey do u guys know if that magnaflow exhaust will fit the cut out of 2nd generations, or who ever owns that car, can measure the tips for me i'll c if it fits on my own.

laslo

all o those cars are sick, and 1983 . i like your ride .. we should meet up some time round here ......... oh and i love those rims .there the best ive ever seen .......im so sad i missed the meet . but ill get on the next one .......

acura1983

im always around the roseville area....r u the one with the white CL?

layedout95

Someone should make one of these meets in Central California.

97Acura3.0CL

layedout95: what part of central cali are you from? im from turlock area, i know of another guy in modesto and ive seen a couple in turlock but i dont think they are on the board

where are you from layedout95????

97Acura3.0CL

i clicked your WWW link, nice pics of your car

hit me up i sent you a PM

layedout95

Fresno area there is a very clean cl around here hammered on nepper hazz wheels Badest cl in town I have seen without a doubt.