Neccesaty Steps for a turbo
#1
Evolution
Thread Starter
Join Date: Feb 2002
Location: South Bend, Indiana
Age: 39
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
Neccesaty Steps for a turbo
I knw dust is en route of building a cutom turbo as well, but I was wondering, aside from headers, sooped up tranny, pulleys, and fuel injectors, what would be needed to build my engine for a turbo (Garrett T3/T4) and spearco front mount intercooler
#5
TEAM BLUR So. CAL
Join Date: May 2002
Location: Chino Hills
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
well if your going turbo, you can throw your headers in the trash. the exhaust manifold goes in place of the headers. it really depends on how much psi your going to boost. but the must needs are:
some type of fuel management system like greedy e-manage or apexi vafc.
injectors at least 440cc
and a thinner headgasket to lower your compression.
some type of fuel management system like greedy e-manage or apexi vafc.
injectors at least 440cc
and a thinner headgasket to lower your compression.
#6
TEAM BLUR So. CAL
Join Date: May 2002
Location: Chino Hills
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
there a whole other list of stuff that you will need. . . . in your case. . i'd go to a pro. the 3.0 doesn't have many parts to make it functional with turbo. . . it's really hard to say what you need.
Thread
Thread Starter
Forum
Replies
Last Post
DerrickW
3G TL Performance Parts & Modifications
9
11-15-2015 05:52 PM
Joe Avesyan
3G TL Performance Parts & Modifications
9
09-29-2015 03:57 PM