Lip kit
#1
Alex's CL
Thread Starter
Join Date: Jun 2004
Location: FL, miami
Age: 37
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
Lip kit
Well I called autoaportz.com and was ordering the acura cl front lip with the accord agressor 95-96 rear lip when the guy told me that the rear lip 95-96 did not make sense becuase 95 and 96 are two different models. What year is exactly the rear lip of the accord that would be easier to modify and also if its 2 door or 4door?
pic of rear lip I want, plz help me out
pic of rear lip I want, plz help me out
#2
DamnThisHobby'sExpensive!
From what I remember...
Theres the 94-95 rear lip.... and then theres the 96-97 rear lip.
Thus...if im correct...the models did change between 95 & 96.
I think both should be able to fit though.
I think Nippon_Wa had the 94-95 style
Klepto has the 96-97 style rear lip
Theres the 94-95 rear lip.... and then theres the 96-97 rear lip.
Thus...if im correct...the models did change between 95 & 96.
I think both should be able to fit though.
I think Nippon_Wa had the 94-95 style
Klepto has the 96-97 style rear lip
#3
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by Acura3.0CL
From what I remember...
Theres the 94-95 rear lip.... and then theres the 96-97 rear lip.
Thus...if im correct...the models did change between 95 & 96.
I think both should be able to fit though.
I think Nippon_Wa had the 94-95 style
Klepto has the 96-97 style rear lip
Theres the 94-95 rear lip.... and then theres the 96-97 rear lip.
Thus...if im correct...the models did change between 95 & 96.
I think both should be able to fit though.
I think Nippon_Wa had the 94-95 style
Klepto has the 96-97 style rear lip
#4
nippon_wa 2.0
Join Date: May 2002
Location: Lynnwood, WA
Age: 40
Posts: 2,348
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Acura3.0CL
From what I remember...
Theres the 94-95 rear lip.... and then theres the 96-97 rear lip.
Thus...if im correct...the models did change between 95 & 96.
I think both should be able to fit though.
I think Nippon_Wa had the 94-95 style
Klepto has the 96-97 style rear lip
Theres the 94-95 rear lip.... and then theres the 96-97 rear lip.
Thus...if im correct...the models did change between 95 & 96.
I think both should be able to fit though.
I think Nippon_Wa had the 94-95 style
Klepto has the 96-97 style rear lip
currect. I have 94-95. And, the picture above is exactly same as mine.
#5
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Are they selling just the rear lip? They have only the whole kit listed on their site?
#6
Alex's CL
Thread Starter
Join Date: Jun 2004
Location: FL, miami
Age: 37
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
no you can order it seprate and they gave me a pretty gud deal its was 369 front lip shipped considering you can't find the lip anywere and both the front lip and rear lip is 641$ shipped with tax and everything to miami FL.
Trending Topics
#10
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by KLepTo
ok. you can have the wing
#12
DamnThisHobby'sExpensive!
I thought there wasnt really much customizing? I didnt think Klepto or Nippon had to cut it in half and mold it back...?...I thought they just stuck it on the bumper and slid it up or down to get it just right...?...am i wrong?
Did u guys have to cut them in 1/2 and mold them back??
Did u guys have to cut them in 1/2 and mold them back??
#13
Senior Moderator
Join Date: Jul 2002
Location: Bay Area, CA
Age: 39
Posts: 12,005
Likes: 0
Received 9 Likes
on
8 Posts
this is serioulsy liky my 20th time saying it.
I had to cut out 2" from the middle and bond it back. Nippon didnt, but his sits much higher up on the bumper than mine. VXCL, baka_t, and reminxzza (forgot the actual spelling) all had theirs cut and bonded back as well
I had to cut out 2" from the middle and bond it back. Nippon didnt, but his sits much higher up on the bumper than mine. VXCL, baka_t, and reminxzza (forgot the actual spelling) all had theirs cut and bonded back as well
#15
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by KLepTo
this is serioulsy liky my 20th time saying it.
I had to cut out 2" from the middle and bond it back. Nippon didnt, but his sits much higher up on the bumper than mine. VXCL, baka_t, and reminxzza (forgot the actual spelling) all had theirs cut and bonded back as well
I had to cut out 2" from the middle and bond it back. Nippon didnt, but his sits much higher up on the bumper than mine. VXCL, baka_t, and reminxzza (forgot the actual spelling) all had theirs cut and bonded back as well
#16
Alex's CL
Thread Starter
Join Date: Jun 2004
Location: FL, miami
Age: 37
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
Im going for a whole different look. Well i hope no one has it like this.
-Molding front lip to bumper
-molding rearlip to bumper and mold the rear bumper to body
-molding side skirts to the body
-getting fender flares and molding all the way to the front lip to the rear lip but being cut off in the front bumper so in case I need to take out the front bumper there will be no problem
-so basically everything molded except the front bumper to body.
What you guys think?
-Molding front lip to bumper
-molding rearlip to bumper and mold the rear bumper to body
-molding side skirts to the body
-getting fender flares and molding all the way to the front lip to the rear lip but being cut off in the front bumper so in case I need to take out the front bumper there will be no problem
-so basically everything molded except the front bumper to body.
What you guys think?
#17
First EVER K24 Turbo CL
iTrader: (2)
Originally Posted by slamed_cl_on_18z
Im going for a whole different look. Well i hope no one has it like this.
-Molding front lip to bumper late
-molding rearlip to bumper and mold the rear bumper to bodylate
-molding side skirts to the bodydunno bout that
-getting fender flares and molding all the way to the front lip to the rear lip but being cut off in the front bumper so in case I need to take out the front bumper there will be no problemlate
-so basically everything molded except the front bumper to body.why?
What you guys think?
-Molding front lip to bumper late
-molding rearlip to bumper and mold the rear bumper to bodylate
-molding side skirts to the bodydunno bout that
-getting fender flares and molding all the way to the front lip to the rear lip but being cut off in the front bumper so in case I need to take out the front bumper there will be no problemlate
-so basically everything molded except the front bumper to body.why?
What you guys think?
#18
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by starboy2nv
lol
#19
Moderator
iTrader: (1)
Originally Posted by slamed_cl_on_18z
Im going for a whole different look. Well i hope no one has it like this.
-Molding front lip to bumper
-molding rearlip to bumper and mold the rear bumper to body
-molding side skirts to the body
-getting fender flares and molding all the way to the front lip to the rear lip but being cut off in the front bumper so in case I need to take out the front bumper there will be no problem
-so basically everything molded except the front bumper to body.
What you guys think?
-Molding front lip to bumper
-molding rearlip to bumper and mold the rear bumper to body
-molding side skirts to the body
-getting fender flares and molding all the way to the front lip to the rear lip but being cut off in the front bumper so in case I need to take out the front bumper there will be no problem
-so basically everything molded except the front bumper to body.
What you guys think?
#20
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by slamed_cl_on_18z
Im going for a whole different look. Well i hope no one has it like this.
-Molding front lip to bumper
-molding rearlip to bumper and mold the rear bumper to body
-molding side skirts to the body
-getting fender flares and molding all the way to the front lip to the rear lip but being cut off in the front bumper so in case I need to take out the front bumper there will be no problem
-so basically everything molded except the front bumper to body.
What you guys think?
-Molding front lip to bumper
-molding rearlip to bumper and mold the rear bumper to body
-molding side skirts to the body
-getting fender flares and molding all the way to the front lip to the rear lip but being cut off in the front bumper so in case I need to take out the front bumper there will be no problem
-so basically everything molded except the front bumper to body.
What you guys think?
#21
DamnThisHobby'sExpensive!
Well crap. I know i gotta cut out the honeycomb crap...but i really didnt want to have to cut it in 1/2 and bond/mold it back together....crrappp Maybe I can just F* with it on the bumper to make it fit...(like Nippon_Wa)
Otherwise, I guess i better start reading on how to do this...cuz theres nooo way in hell im payin a bodyshop to do anything other than paint....
(if u dont remember...they wanted $300 to install the damn CF hood.... So theres nooo way in hell im letting them do anything elce besides shootin some paint....I'll install and do the rest.
Otherwise, I guess i better start reading on how to do this...cuz theres nooo way in hell im payin a bodyshop to do anything other than paint....
(if u dont remember...they wanted $300 to install the damn CF hood.... So theres nooo way in hell im letting them do anything elce besides shootin some paint....I'll install and do the rest.
#22
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by Acura3.0CL
Well crap. I know i gotta cut out the honeycomb crap...but i really didnt want to have to cut it in 1/2 and bond/mold it back together....crrappp Maybe I can just F* with it on the bumper to make it fit...(like Nippon_Wa)
Otherwise, I guess i better start reading on how to do this...cuz theres nooo way in hell im payin a bodyshop to do anything other than paint....
(if u dont remember...they wanted $300 to install the damn CF hood.... So theres nooo way in hell im letting them do anything elce besides shootin some paint....I'll install and do the rest.
Otherwise, I guess i better start reading on how to do this...cuz theres nooo way in hell im payin a bodyshop to do anything other than paint....
(if u dont remember...they wanted $300 to install the damn CF hood.... So theres nooo way in hell im letting them do anything elce besides shootin some paint....I'll install and do the rest.
I still can't believe taht place tried charging $300 to install the fawkin hood, took me like 15 mins with a friend.
#24
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by shnee420
i dont like red cars, but that looks pretty sexy
#25
Senior Moderator
Join Date: Jul 2002
Location: Bay Area, CA
Age: 39
Posts: 12,005
Likes: 0
Received 9 Likes
on
8 Posts
Originally Posted by 97BlackAckCL
G'luck, klepto paid i think 4-500 (he can clarify) for this to be fit to his bumper. But if you can get it to fit w/o that would be cool. G'luck
I still can't believe taht place tried charging $300 to install the fawkin hood, took me like 15 mins with a friend.
I still can't believe taht place tried charging $300 to install the fawkin hood, took me like 15 mins with a friend.
#27
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by Nato
i didnt have to cut the middle on my back lip... just cut the edges on two sides
#28
DamnThisHobby'sExpensive!
I thought VXCL had the 96-97 Lip like Klepto....and Nato has the 94-95 Wagon Style??
We really need to make a list of who has what type...and how they modded & installed it.
We really need to make a list of who has what type...and how they modded & installed it.
#29
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by Acura3.0CL
I thought VXCL had the 96-97 Lip like Klepto....and Nato has the 94-95 Wagon Style??
We really need to make a list of who has what type...and how they modded & installed it.
We really need to make a list of who has what type...and how they modded & installed it.
#30
DamnThisHobby'sExpensive!
crraappp...so out of all the rear lips....I finally find one and get it...and its the hardest to mod and install...
I wonder If I could just cut the ends of this one...not have to cut the middle...
I wonder If I could just cut the ends of this one...not have to cut the middle...
#33
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by slamed_cl_on_18z
Orderd the front lip and rear lip front andy's auto sport 580$ both shipping inculded.
what you guys think?
what you guys think?
#35
Senior Moderator
Join Date: Jul 2002
Location: Bay Area, CA
Age: 39
Posts: 12,005
Likes: 0
Received 9 Likes
on
8 Posts
Originally Posted by slamed_cl_on_18z
Orderd the front lip and rear lip front andy's auto sport 580$ both shipping inculded.
what you guys think?
what you guys think?
Thread
Thread Starter
Forum
Replies
Last Post
emailnatec
5G TLX Tires, Wheels & Suspension
29
09-28-2018 04:27 PM
rp_guy
Member Cars for Sale
9
07-16-2017 07:33 AM
calrow
Car Parts for Sale
11
05-03-2017 10:21 PM