Just did seafoam...here's a little how-to just in case
#1
SSM Accord V6 6 Spd
Thread Starter
Join Date: May 2003
Location: Austin, TX
Age: 38
Posts: 1,933
Likes: 0
Received 0 Likes
on
0 Posts
Just did seafoam...here's a little how-to just in case
Hey Guys,
I just finished doing seafoam on my 3.0 with a friend and thought that I would share a couple of pics of what went down. Basically, we did 1/3 in the PCV valve, 1/3 in the oil, and 1/3 in the gas, then went straight for an oil change afterwards. Anyways, here are a few pics of it all:
The bottle itself. I picked mine up at O'Reilly for about 6 bucks.
This is the tube we used to suck it in. You can see the little 'T' connector we took it off of.
A closeup of the actual 'T' connector.
Now some videos:
Vid One: us sucking it into the car. Always important to do it a bit at a time.
Click Here
Vid Two: smoke shooting out. Lots of fun here.
Click Here
All in all, it was a lot easier than I thought it would be. Within 30 minutes, we had done everything, including an oil change. Hope this has helped all. Feel free to ask any questions and I'll try to answer them the best I can.
I just finished doing seafoam on my 3.0 with a friend and thought that I would share a couple of pics of what went down. Basically, we did 1/3 in the PCV valve, 1/3 in the oil, and 1/3 in the gas, then went straight for an oil change afterwards. Anyways, here are a few pics of it all:
The bottle itself. I picked mine up at O'Reilly for about 6 bucks.
This is the tube we used to suck it in. You can see the little 'T' connector we took it off of.
A closeup of the actual 'T' connector.
Now some videos:
Vid One: us sucking it into the car. Always important to do it a bit at a time.
Click Here
Vid Two: smoke shooting out. Lots of fun here.
Click Here
All in all, it was a lot easier than I thought it would be. Within 30 minutes, we had done everything, including an oil change. Hope this has helped all. Feel free to ask any questions and I'll try to answer them the best I can.
#3
Peace, Love & Acura
So you put 1/3 in the oil and 1/3 in the gas. Was this vacume hose to the EGR, and when you say you put it in the oil and gas, you just poored it in the oil fill and into the gas tank? cool, I will have to try that. Correct me if I miss understood you. By the way, how long did you let it run in your oil before you changed it?
#6
BigAngryAsian
Join Date: Jan 2003
Location: Calgary
Age: 44
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by endlessdragon
that's awesome...
i wanna do that too but they don't sell seafoam in canada...
damn
i wanna do that too but they don't sell seafoam in canada...
damn
Trending Topics
#11
I'm a llama :(
Join Date: Jul 2004
Location: Washington
Posts: 4,243
Likes: 0
Received 0 Likes
on
0 Posts
I did that too and there was sooooo much smoke. It was really cool! I wanted to smoke other cars, but it ran out before I got to a main road.
I had some pinging though...is that normal? I took it easy till the pinging stopped, then I drove it hard.
I had some pinging though...is that normal? I took it easy till the pinging stopped, then I drove it hard.
#12
Safety Car
Join Date: Aug 2003
Location: TAMPA
Age: 47
Posts: 4,317
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Motohip
I did that too and there was sooooo much smoke. It was really cool! I wanted to smoke other cars, but it ran out before I got to a main road.
I had some pinging though...is that normal? I took it easy till the pinging stopped, then I drove it hard.
I had some pinging though...is that normal? I took it easy till the pinging stopped, then I drove it hard.
your supposed to let the car sit for a while.. ive always waited like 30min then started, just to avoid hydrolock.
#14
I'm a llama :(
Join Date: Jul 2004
Location: Washington
Posts: 4,243
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by wilp99
your supposed to let the car sit for a while.. ive always waited like 30min then started, just to avoid hydrolock.
#18
~ The Endless One ~
Join Date: Jul 2004
Location: Vancouver, B.C.
Age: 47
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Chen
Theres an AutoValue that carries it here in Calgary. Might want to check there.
#19
Ciao Pho Eva eva
Join Date: Oct 2004
Location: Pasadena, CA
Age: 39
Posts: 4,527
Likes: 0
Received 0 Likes
on
0 Posts
When i gave my car a foam job, it only spit out a lil white smoke.. i prolly did it wrong...
Order it online..
Originally Posted by endlessdragon
i think i'll pass...hahaha vancouver -> calgary for a can of seafoam? lol
#20
BigAngryAsian
Join Date: Jan 2003
Location: Calgary
Age: 44
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by endlessdragon
i think i'll pass...hahaha vancouver -> calgary for a can of seafoam? lol
#25
SEAFOAM is the shiznit...did it over the weekend....about 14 ounces sucked right down through PCV...left it sit 3 1/2 hours...smoked like a bad boy...took it for a ride up the highway...lots of white smoke for about seven miles...also lots of concerned looks from other drivers...then changed oil..car runs lot smoother now...jumps on command...
all in all, a good product.
all in all, a good product.
#26
Ahhhhhhhh
Join Date: Oct 2003
Location: Bay Area, CA
Age: 38
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by macac
SEAFOAM is the shiznit...did it over the weekend....about 14 ounces sucked right down through PCV...left it sit 3 1/2 hours...smoked like a bad boy...took it for a ride up the highway...lots of white smoke for about seven miles...also lots of concerned looks from other drivers...then changed oil..car runs lot smoother now...jumps on command...
all in all, a good product.
all in all, a good product.
#27
Safety Car
Join Date: Aug 2003
Location: TAMPA
Age: 47
Posts: 4,317
Likes: 0
Received 0 Likes
on
0 Posts
naw man u leave it off...
you can also put it in your oil, start the car run for 2 min shut down and drain. gets all the old oil out of the crevist. u can put it in the tranny, and gas tank too.
i love that shit... some times it makes the cel come on, but it can be reset and never come back.
you can also put it in your oil, start the car run for 2 min shut down and drain. gets all the old oil out of the crevist. u can put it in the tranny, and gas tank too.
i love that shit... some times it makes the cel come on, but it can be reset and never come back.
#34
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by ajtcl
Yeah, you will blow smoke out your ass. hahaha...
#35
Originally Posted by endlessdragon
i think i'll pass...hahaha vancouver -> calgary for a can of seafoam? lol
maybe we could do it on the spot
#38
Skuuuurrrrrt!
iTrader: (1)
Alright, so I just searched 5 different seafoam threads for the 3.0 and they all say the same thing about the 'T' connector thing but the pics are always down. wtf is that? Can someone post a pic of the tube of the T conector? I really want to do this before my dad gets home in 3 hours...
#40
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
The T-Connector is the vacuum lines on the back part of the engine