H22 swap
#83
Instructor
Join Date: Feb 2007
Location: westchester, ny or philly
Age: 39
Posts: 139
Likes: 0
Received 1 Like
on
1 Post
There is no reason to buy the ultimate swap guide. You can definaltly find out all this info on here or honda-tech. I am new to acurazine but have been on honda tech for 5 or so years. wireing isn't that hard. Like pala said I would run the p13. I would even wire in the butterflies and egr to work. But I like everthing to run like stock.
#84
Pro
Join Date: Sep 2004
Location: Calgary, Canada
Age: 37
Posts: 643
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Palayah8ta
Okaay.. this Link :
http://www.xenocron.com/products.php?page=chipped-ecu
make sure if u buy from there to get the 'real p28' dont waste ur time with the other ones. but thats a pretty good deal if its coming with a chrome system already. its costing me $250 to have chrome installed and my car tuned after paying $150 for the chipped p28. SOO do me a favor and ASK the seller if hes going to install the chrome program or just 'prep' the ecu for chrome/uber/neptune.
The conversion harness, $75 is a ripoff. The $40 ebay ones are perfectly fine as long as u secure the ecu to the car properly. make sure u get an OBD2B to OBD1
http://cgi.ebay.com/ebaymotors/OBD2b...mZ270147431401
i bought from them, all these people get the harness from the same manufacturer but for some reason theres a $20 markup. except from this place.
http://www.xenocron.com/products.php?page=chipped-ecu
make sure if u buy from there to get the 'real p28' dont waste ur time with the other ones. but thats a pretty good deal if its coming with a chrome system already. its costing me $250 to have chrome installed and my car tuned after paying $150 for the chipped p28. SOO do me a favor and ASK the seller if hes going to install the chrome program or just 'prep' the ecu for chrome/uber/neptune.
The conversion harness, $75 is a ripoff. The $40 ebay ones are perfectly fine as long as u secure the ecu to the car properly. make sure u get an OBD2B to OBD1
http://cgi.ebay.com/ebaymotors/OBD2b...mZ270147431401
i bought from them, all these people get the harness from the same manufacturer but for some reason theres a $20 markup. except from this place.
When you say you're having Crome installed, are you sure you're not getting ripped off? If you're paying any money for Crome itself, make sure you're getting the licenced version (Crome Pro) which you can ONLY use on YOUR computer.
It sounds like you're just getting someone with a Crome Pro licence to tune your ecu, which is good. Just make sure you know what you're getting.
Moates.net and Xenocron.com are the two best sites to get ecu related stuff from.
#85
Ciao Pho Eva eva
Join Date: Oct 2004
Location: Pasadena, CA
Age: 39
Posts: 4,527
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Kulrevon
There is no reason to buy the ultimate swap guide. You can definaltly find out all this info on here or honda-tech. I am new to acurazine but have been on honda tech for 5 or so years. wireing isn't that hard. Like pala said I would run the p13. I would even wire in the butterflies and egr to work. But I like everthing to run like stock.
#89
Originally Posted by AznX TL
do the swap, gain experience.............then do mine
#90
yea even though ill void the motor's warranty (in case its all fucked up) im still gonna do the swap myself. even though the wiring is gonna be such a nightmare.
worst comes to worse i have it towed to my local speedshop. even though getting my car on a flatbed is gonna be a project within itself. ill have to take my bumper and exahust off just to get it on a flatbed with no damage.
worst comes to worse i have it towed to my local speedshop. even though getting my car on a flatbed is gonna be a project within itself. ill have to take my bumper and exahust off just to get it on a flatbed with no damage.
#91
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Sexy motor
Yeah getting your car on a flatbed would be a chore, that bitch is LOW. I saw her in person
Yeah getting your car on a flatbed would be a chore, that bitch is LOW. I saw her in person
#94
Originally Posted by CLpwner
what year prelude is it from?
they only gave me the header which i didnt realize until i got home. im gonna see if they can give me the downpipe.
i got the complete swap for $1800. they offered me a MINE's chipped p13, but i turned it down. i might still get it though. but id rather have the chipped p28.
#95
Ciao Pho Eva eva
Join Date: Oct 2004
Location: Pasadena, CA
Age: 39
Posts: 4,527
Likes: 0
Received 0 Likes
on
0 Posts
if ur going the p28 route, then i need to show u how to keep ur secondary butterfly rigged open. Or u can remove it completely if u take ur IM apart.
#96
arite cool. i can take my IM apart, no biggie.
im having some dude on Honda tech that lives close to me help me on the swap. all he does is swapp H22's into his civics and such, and does H2B swaps as well. so hopefully with his guidance this swap will be less of a headache, wiring wise.
im having some dude on Honda tech that lives close to me help me on the swap. all he does is swapp H22's into his civics and such, and does H2B swaps as well. so hopefully with his guidance this swap will be less of a headache, wiring wise.
#97
Ciao Pho Eva eva
Join Date: Oct 2004
Location: Pasadena, CA
Age: 39
Posts: 4,527
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 972xghost
arite cool. i can take my IM apart, no biggie.
im having some dude on Honda tech that lives close to me help me on the swap. all he does is swapp H22's into his civics and such, and does H2B swaps as well. so hopefully with his guidance this swap will be less of a headache, wiring wise.
im having some dude on Honda tech that lives close to me help me on the swap. all he does is swapp H22's into his civics and such, and does H2B swaps as well. so hopefully with his guidance this swap will be less of a headache, wiring wise.
#99
Ciao Pho Eva eva
Join Date: Oct 2004
Location: Pasadena, CA
Age: 39
Posts: 4,527
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 972xghost
how much u get that H23 trans for?? you did it yourself right?
#102
Complete Swap $1800.00
Hasport Motor Mount 140.00
H23 Manual Tensioner Converision 130.00
Ultimate H22 Swap Guide 40.00
--------------
$2110.00
thats what ive spent so far.
i still have to buy the chipped p28 ECU and the conversion harness. plus some small stuff along that way.
Hasport Motor Mount 140.00
H23 Manual Tensioner Converision 130.00
Ultimate H22 Swap Guide 40.00
--------------
$2110.00
thats what ive spent so far.
i still have to buy the chipped p28 ECU and the conversion harness. plus some small stuff along that way.
#103
Ciao Pho Eva eva
Join Date: Oct 2004
Location: Pasadena, CA
Age: 39
Posts: 4,527
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 972xghost
nice cant beat that. does mixxxwell have a CL??
#105
Ciao Pho Eva eva
Join Date: Oct 2004
Location: Pasadena, CA
Age: 39
Posts: 4,527
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SupraManAG
Hasport motor mounts $140? where when? are they aluminum or just inserts?
#106
Originally Posted by SupraManAG
Hasport motor mounts $140? where when? are they aluminum or just inserts?
they should be coming from cali tommorow, once i get them im putting my car under the knife.
#107
Ciao Pho Eva eva
Join Date: Oct 2004
Location: Pasadena, CA
Age: 39
Posts: 4,527
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 972xghost
i actually bought it directly from hasport, so figured i got the steepest price.
they should be coming from cali tommorow, once i get them im putting my car under the knife.
they should be coming from cali tommorow, once i get them im putting my car under the knife.
#109
Originally Posted by Palayah8ta
nice.. u must be excited as hell. for a month i had dreams of driving my new h-twinkie
#112
Senior Moderator
Originally Posted by 972xghost
ive had dreams of this swap in an accord (but CL is just as good) since i was in 8th grade, when i first got into accords. so i guess i was like 12-13.
#113
major set back in the swap. i have everything i need, but last night when trying to do the H23 manual tensioner conversion, i couldnt get the crank bolt off for the life of me. we had a 1000lb-ft air gun, but the compresser we were using is like 50 years old, so we couldnt get the full potential of the gun. so tommorow were getting a better compressor from a friend.
i should have had the tensioner conversion done last night, so i could have started pulling the F22 out on friday, but theres always that one set-back.
got my ECU and conversion harness today, and im pretty souped about that. went to xenocryn to pick it all up and had them set the ECU to 8g's and 4500 for the 2-step.
got my DC Sports 4-2-1 header from H22-EuroR the other day. so right off the bat im gonna have I/H/E.
ill keep you guys updated.
i should have had the tensioner conversion done last night, so i could have started pulling the F22 out on friday, but theres always that one set-back.
got my ECU and conversion harness today, and im pretty souped about that. went to xenocryn to pick it all up and had them set the ECU to 8g's and 4500 for the 2-step.
got my DC Sports 4-2-1 header from H22-EuroR the other day. so right off the bat im gonna have I/H/E.
ill keep you guys updated.
#114
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Sweetness, hope you don't have any more major set backs, I'm sure you will cuz that's the way of doing custom work. Let us know how it goes.
#115
Senior Moderator
Originally Posted by 972xghost
major set back in the swap. i have everything i need, but last night when trying to do the H23 manual tensioner conversion, i couldnt get the crank bolt off for the life of me. we had a 1000lb-ft air gun, but the compresser we were using is like 50 years old, so we couldnt get the full potential of the gun. so tommorow were getting a better compressor from a friend.
i should have had the tensioner conversion done last night, so i could have started pulling the F22 out on friday, but theres always that one set-back.
got my ECU and conversion harness today, and im pretty souped about that. went to xenocryn to pick it all up and had them set the ECU to 8g's and 4500 for the 2-step.
got my DC Sports 4-2-1 header from H22-EuroR the other day. so right off the bat im gonna have I/H/E.
ill keep you guys updated.
i should have had the tensioner conversion done last night, so i could have started pulling the F22 out on friday, but theres always that one set-back.
got my ECU and conversion harness today, and im pretty souped about that. went to xenocryn to pick it all up and had them set the ECU to 8g's and 4500 for the 2-step.
got my DC Sports 4-2-1 header from H22-EuroR the other day. so right off the bat im gonna have I/H/E.
ill keep you guys updated.
#117
Ciao Pho Eva eva
Join Date: Oct 2004
Location: Pasadena, CA
Age: 39
Posts: 4,527
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 972xghost
got my ECU and conversion harness today, and im pretty souped about that. went to xenocryn to pick it all up and had them set the ECU to 8g's and 4500 for the 2-step.
.
.
#118
Senior Moderator
Originally Posted by Palayah8ta
8k redline is pretty high.. they set mine at 7600, and my CEL comes on at 7200 telling me to shift
#119
Ciao Pho Eva eva
Join Date: Oct 2004
Location: Pasadena, CA
Age: 39
Posts: 4,527
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DaInFaMMuS1
8k is what i normally hear people setting their rev limiter to. My friend actually set his to 8200 in his accord to give him some leeway of hitting the rev limiter
plus ur power drops off dramatically, ur just abusing ur car. .
#120
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by Palayah8ta
for a stock motor? do u wnat to go boom? i/h/e doesnt do That much...
plus ur power drops off dramatically, ur just abusing ur car. .
plus ur power drops off dramatically, ur just abusing ur car. .