Door Alignment (with pics)
#1
Door Alignment (with pics)
Has anyone seen anything like this happen before?
Here are pictures of both of my doors, the Driverside door doesn't close all the way and the passenger door does.
There's nothing preventing the door from closing, and its happened in the past 2 weeks.
Here are pictures of both of my doors, the Driverside door doesn't close all the way and the passenger door does.
There's nothing preventing the door from closing, and its happened in the past 2 weeks.
#4
Instructor
Join Date: Oct 2002
Location: Rocklin, CA
Age: 43
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
you have to adjust the "strike?" plate. The same thing happened to me and I was told to adjust it in a little. (the plate on the inside of the B pillar.) and I shut fine after that..
#7
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by CLver
you have to adjust the "strike?" plate. The same thing happened to me and I was told to adjust it in a little. (the plate on the inside of the B pillar.) and I shut fine after that..
Trending Topics
#10
1999 CL3.0
related to this does anyones door make a clicking noise as it opens?
just recently, when i open my door, at the points where it usually has its "rests" its been
clicking, the hing seems like its mobile. anyone experience this ?
just recently, when i open my door, at the points where it usually has its "rests" its been
clicking, the hing seems like its mobile. anyone experience this ?
#11
2.2 auto and coping
Join Date: Sep 2004
Location: San Antonio, Tx
Age: 39
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
my driver side was just like this.
But after my timing belt change...the door must have been left open for a long while because it sagged and would hit hard against the metal bar the striker grabs.
I bitched, they lowered that bar (bent it down) and now...closes perfectly flush..
But after my timing belt change...the door must have been left open for a long while because it sagged and would hit hard against the metal bar the striker grabs.
I bitched, they lowered that bar (bent it down) and now...closes perfectly flush..
Thread
Thread Starter
Forum
Replies
Last Post