chiggacl68

Well I am new to this forum...someone told me there was a CL forum which is cool...
Anyways now onto the problem...I have a 99 2.3 CL and I got the Eibach sportlines from the 94-97 accords which everyone told me to get...the drop should have been 1.8 inches to maybe max 2 or even 2.25 inches...well when they were finally put on...the actual drop is like 3 inches to the point where I have to angle like crazy and half the time I still scratch...I hate that cuz its a B*tch to do and not practical for everyday driving... Does anyone know why it does this or if something is wrong? Or should I have put the 98-00 accord springs...? If I get the pro-kit which is supposed to do a 1.3 inch drop when put on my car will it turn into something like 2-2.25 inches or something...I was looking into H&R sports which drop it about 1.5-1.75 which is about the height i would want so when it settles it will be more like 2 inches if the number is correct on my car...Does anyone have any experience with this...Sorry about the long post but I appreciate any help from you guys...didnt know getting things for my car would be such a pain in the @ss...thanks guys

------------------
99 Black 2.3 Acura CL 5-speed
Clarion DRX957Rz,
Crossfire 404s & 1000D,
Diamond Audio M561 w/hex
tweeters, Crystal CXe693,
Matrix intake, R*SR exhaust,
AIM-Chiggacl68

NOVAwhiteTypeS

should of went w/ comptechs

------------------
CL-S
White/Ebony/Navi/Spoiler/Visor/Full Bra/Mud Guards/Cargo Net/Acura Car Cover/Tint 20%,35%,5% on Sun Roof, Rockford 250a2 Amp w/JL10w6 / K&N Drop in Filter. Comptech Springs. Polarg m-6.
Comptech Headers, Comptech Sways, Eurolite Xenon Crystal high beams.
AEM CAI once they decide to make the dame thing.
235/40/17's or 225/45/17's once I found out which one works for me.

gtech 0-60 6.03 w/ 438 pound load. preheader.

chiggacl68

I would have thought about it but the comptech's only make it for the 2001 CL

------------------
99 Black 2.3 Acura CL 5-speed
Clarion DRX957Rz,
Crossfire 404s & 1000D,
Diamond Audio M561 w/hex
tweeters, Crystal CXe693, 2 12" Diamond M5 subs in custom sealed box
Matrix intake, R*SR exhaust,
AIM-Chiggacl68

tw1112

I think they do only make them for the 01 CL's. Are you still on the stock shocks? That's kinda wierd...did it settle into 3inches or was it right away? Maybe upgrade to better shocks...

Anyways...im going to move this to 1st gen Forum, there's a lot of us over there that have springs

By the way, welcome to the board!
------------------
Tw1112
CL 3.0 '98 - Cleared bumper, Hiper/Piaa/Polarg bulbs all around, PIAA 1700x fogs, AEM CAI, V1, and Mugen Pedals.

• My CL
• LA Autoshow
• SoCal Meet

[This message has been edited by tw1112 (edited 03-18-2001).]

chiggacl68

The drop was right away...Im afraid if it settles in a little more... I will scratch over everything which would suck...I was looking into H&R sports or Eibach prokit...but I cant have it lower than 2.25 inches...I was looking into maybe 1.75-2inches...

------------------
99 Black 2.3 Acura CL 5-speed
Clarion DRX957Rz,
Crossfire 404s & 1000D,
Diamond Audio M561 w/hex
tweeters, Crystal CXe693, 2 12" Diamond M5 subs in custom sealed box
Matrix intake, R*SR exhaust,
AIM-Chiggacl68

Jawo

I suggest you go with prokits. You'll have to deal with camber problems if you lower your car more than 1.5 inches. And like already mentioned above, you should change shocks too.

chiggacl68

I already got a camber kit...so it really doesnt matter ...i should get shocks...i was looking into koni yellows but they are hella expensive...so...not sure yet on that

------------------
99 Black 2.3 Acura CL 5-speed
Clarion DRX957Rz,
Crossfire 404s & 1000D,
Diamond Audio M561 w/hex
tweeters, Crystal CXe693, 2 12" Diamond M5 subs in custom sealed box
Matrix intake, R*SR exhaust,
AIM-Chiggacl68