sup guys.. i think it was vxcl and dennis who had a 94-95 ww type w rear skirt (accord). What needs to be done to make it fit right on the cl? i appreciate all the help..

 

cut about 2 inches off and mold

 

I'm not totally sure. But I remember reading awhile back that 2 inches was correct.

 

sup dennis and acurality.. thanks for the help..

 

bottom line is that its has to be cut in two places to remove a section out of the center. the amount depends on how low your going to mount the lip on the bumper. just keep in mind that you will also have to cut a section out for the exhaust and have your exhaust extended becuase it will be hinding behind the lip if you mount it as low as i did.

my server is messed and my pic wont show for some reason

 

sup vxcl.. thanks a lot.. on your WWW the link is at Comcast but no images there.. do you have another server where you have all of your pictures? thanks..

 

To piggyback on that, depending on where you mount the lip, you might have to cut into the bumper for the liscense plate opening. On top of have your exaust extended, it needs to be lower.