Originally Posted by me

OK here's the heights for inside the headlight, the reflector at it's highest point is 4" in the middle of the lowbeam area, the highbeam is 3.5" tall in the very center but is sloping down heading away from the lowbeam toward the hood. The height of the chrome housing that people paint black is 3.75" so you will need something under that to be able to clear into the front of the headlight including bezels, oh and 3" across is doable in both high and low beam as long as you're under 3.5" i'd say.

Meaning that the high beam is right at 4" tall above the bulb hole at the very center of the highbeam side of the reflector but the height starts going down beyond that, as in under 4" then down in a downward slope

Originally Posted by 97BlackAckCL

Funny you should ask since I just posted this in the Q&A thread a few weeks ago, this was regarding the height, and trying to fit 3" wide projectors in.



Let me know if you need more measurements of the reflectors as I have an extra headlight laying around open