Originally Posted by ccannizz11

Can I put you on the list? Anyone else want to go ahead and add their name?

I'd like to be able to tell my contact that we have a solid group. and we can start hashing out the specs. A quick and dirty measurement shows that we have about 4.75 inch gap to work with on stock suspension. I'm thinking a 2 inch drop all around, with progressive springs would work. The spring rate would vary, but I think it would need to be close to whatever the stock spring is in order to help maintain ride comfort. Any thoughts?



1. ccannizz11
2. DJBLAST
3. FiftyFive???
4. chaosnexstacy
5.

Originally Posted by ccannizz11

Deaded.

1. During my discussions with an Acura Lead Master Technician, it was determined that there is no wiggle room on the MDX to lower the car without modification to keep camber within spec. Adding lowering springs would require a camber kit, which almost doubles the cost from what I posted in the OP.
2. When it came down to it, we couldn't get enough to commit to buying. And I don't have the time any more to round everyone up and handle the communication in every direction.

If those 2 issues do not deter you, I would be happy to give you the contact information for the spring manufacturer I was talking to. Just pm me.

But as far as I'm concerned, this isn't happening.

Originally Posted by Shaun Thompson

I know this is an old post but can you still get lowering spring or air ride for the 06 MDX please let me know if it’s not to late