just need new ballasts from o6 or higher. the o6+ ballasts are slimmer and smaller.
o6 and o5 share all same bulbs and whatnot otherwise so there will be no wiring issues.

 

PM sent a few days ago... No response yet

 

Yeah it takes him a while to respond - but, all the times he responded to me have been SUPER helpful and worth the wait.

JnC is the man.

 

JNC.. You posted this ages ago but do you still have this set of headlights for sale? I know its late haha

 

are you still making headlights?

 

Yessir, I have been slacking a little bit on updating the thread with the recent projects as I have been mostly busy with 4G lights and occasional 3G ones.

The best way to get in touch with me is through my cell/txt at (five zero eight) three six zero - eight three two zero.

 

Hey JnC do you have any pictures of quad headlight you've done?

 

 

^^ my god.....I could not even imagine that car coming down the road with those...

 

Quads are usually for esthetics, no one needs that much light on the road as with the sharp cut off your eyes start hurting after a while. I should know as I use to have TL/ZKW and AP1 S2k combo in my 02 TL-S back in the day.

BTW have you installed your lights? Post pictures if you can.

 

Hey - Did you have any issues related to having a Canadian Domestic Market TL? I'd like to do a swap, as I'm all the way out on the west coast, but only if the headlights are the same as a USDM.

 

^^ I have both, USDM and CDM headlights available for all years of the 3G TL. Shoot me over a PM for details.

 

They are installed except the Angel Eyes are not currently hooked up as I am waiting for a switch....once I have time to install them then I will snap some pics and throw them on this thread.

Shipping my old ones back to you Monday....forgot to bring them into work today...whoops..

They look great though as I would have expected, and no leaks on these ones so far! Thanks again

 

Hey JnC, I don't know if you remember me, but I need to send my TL-S lights in again. My halos burned out, so I'm in the process of buying new ones. The ballasts from the previous halos were kinda crappy and burned out the rings prematurely.

How much would it cost to reinstall new halos on my TL-S lights?

 

That sucks as we replaced them once already in one of the lights . Shoot me a PM and we'll go over details.

 

Details

07-08 TL base headlights
Blacked out V2 (Matte Black)
Carbon Fiber inserts
ZKW-R lens swap



Condition

All tabs are present, one of the inner tabs on the driver side light is plastic welded.
Lenses are in great condition, both lenses have been cleaned and a new coating of UV protection has been applied.
Inner main bezels on both sides had minor cracks but have been fully mended, the crack is only noticeable if inspected from a very close distance.


$500/OBO.

 

Details

07-08 Type S headlights
Blacked out V2
Matte Black main bezel
Main bezel left black chrome
ZKW-R Lenses
Matte Black painted Amber inserts

 

Imabeast31 sent his lights in a few weeks ago to had them redone. The front lenses were shot due to heat damage caused by being in the over for too long. He also got into a fender bender and damaged the passenger side light severely, which included broken inside bezel and completely shattered inner side mount of the headlight plus the headlight itself had a crack.

Couple of before pictures to show the damage and condition of the front lens.





As I personally love challenges like these I wanted to fix these lights rather then replace them with new ones.




Details

05 TL headlights
Blacked out V2, Matte Black
Complete front lens restoration
Replaced inner bezels

 

You never fail to impress JnC.....

 

hey JNC. sent you a PM about my burnt out halo done less than a year ago. I kindly expect a reply, thanks

 

yea yea... pics are not so great. when i'm not busy i'll get some better ones. these are from my iphone

blacked out v3, flatblack diffusers,zkw-r lenses, 6000k HID bulbs and 6000k LED switchbacks

 

Can you explain what you mean here? What do you mean your eyes hurt? And also do those quad headlights still fit on the car without any heavy modification in the engine compartment with the extended projector?

 

I'm very interesting with your tl 04-05 headlight for sale ( i got a tl 05) can you tell me how much it cost for blacked out v2 carbon fiber inlays,led halos or umnititza color changing orion v2 additional with ZKW-R lenses also come with a LED strip on the top of the headlight plz thanks

 

Wow those look awesome JnC! Very nice work on that last pair. Challenge completed.

 

I will love to get this

 

The lens on the headlights you work on look really good. What do you use to restore them?

 

+1

I wet sand and everything with multiple passes and then use Plast-X but the headlights don't look as clear as they can get lets say.

 

Any output shots? How much would you charge for a quad job?

 

can i call you jnc im from canada

 

JNC is the man.. He really impressed me I personally vouch for this guy

 

lights on car

 

im interested but my car is a 2006 tl wwhat can we do

 

Start by reading through the thread.

 

Magic

I sent you a PM with details.
I just use light wet sanding, ONLY if necessary as I try to avoid that as much as possible, polish with different polishes/compounds etc and then throw on a layer or two of clear.



PM me for details or txt at (Five Zero Eight) THree Six Zero - Eight three two zero.

Yessir, number is posted in the above quote.

 

question, i have a 2g TL and im looking to get my headlights cleared and angel eyes installed with the projection headlights can you do this? and how much would it cost?

 

^Check the first page in the thread. He does any headlights.

 

JNC, you got a picture of the turn signal/parking light without the diffuser? I see the lights without diffuser just never saw that area lit up when it was out

 

I have a 07 type S and I would like to know if these are possible to have the DRL be HID and work as intended stock instead of both on or have set up to run both as wanted and as stock when not?? Hope you understand but I will definately contact you during normal people hours.

 

oh my god Color matched Version 2 (V2), Satin Silver Metallic just gave me a stiffy!!!!!! - but now the question is do i get that to match the rdx wheels im gonna get or match the dark grey paint job........ ughhhhhhhhh i wish i wasnt so ocd about this shit!!!! - beautiful work there, playboy!!!

 

Jnc what's the lowest you can go for the headlights you are selling? will it include shipping?