Speedrow

1.Brand of Rim- Niche 130's
2.Rim size (diameter and width) – 19x9.5 all around
3.Offset- +35 all around
4.Brand of tire – Federal super steel 595
5.Tire size - 25/35/19 all around
6.Drop Type and Amount – stock
7.Do they rub – not at preset ride height
8. Transmission type - 5AT no spacers

Bswain321

iTrader: (1)

1.Brand of Rim - Varestoen
2.Rim size 18x9.5 F 18x10.5 R
3.Offset - +25 front ( trying to find out rear
4.Brand of tire - Genral
5.Tire size - 245/40/18
6.Drop Type and Amount - tein advanced 1.5 drop
7.Do they rub
8. Transmission type 5AT for a type S with brembo

05_TX_TL

Was wanting to go with those Miro wheels myself and Powder Coat them Hyper Black but found these for $300 and couldn't pass them up. Also have 245/40R18 Nitto INVO tires which I LOVE! I feel like they need spacers but unsure how much... 25mm maybe??? Thoughts please.

BiggPinyot

Well I'm sure 20mm or 25mm should be fine. And honestly, great pick up for $300. Hopefully one day I will be able to post on here. I am long from it.

blackjackmon

Pulled and cambered for the new wheels.
Weds Bazreia's in 19x10.5 and 19x11.5. Added 20mm spacers all around making it a -5 offset. Stretched 225/35/19 up front and 245/35/19 in rear.

blackjackmon

Hell yeah bro! stoked to see this in Sacramento

tomlinsonj

iTrader: (2)

I have ASPEC wheels and run 245/40/18 as well. Check my progress thread for how they look with 15mm front and 20mm rear spacers.

Modassir

Soooo effing niceeeee You make me wanna go air ride

Modassir

1.Brand of Rim- MB Battles
2.Rim size (diameter and width) – 17x9.5 + 15
3.Offset- +15 Square
4.Brand of tire – Yokahama S-Drive
5.Tire size - 215/35/17
6.Drop Type and Amount – Function & Form Type I not sure how much of a drop
7.Do they rub – Not unless it's a hard turn with bumps
8. Transmission type - 6MT No spacers, clears BBK

jjjoootttaaa

1.Brand of Rim- Concept One CS-16
2.Rim size (diameter and width) – 19x10
3.Offset- +20; +5 & 0 with spacers.
4.Brand of tire – Achilles ATR
5.Tire size - 225/35/19
6.Drop Type and Amount – BC coils w/ custom rates; A lot
7.Do they rub – Barely
8. Transmission type - 5AT

Oscar E

1.Brand of Rim- Niche Concourse
2.Rim size (diameter and width) - 20x8.5
3.Offset - 38mm
4.Brand of tire - Nankang
5.Tire size - 255/30/20
6.Drop Type and Amount - none
7.Do they rub - No rubbing
8. Transmission type (use of spacers if 6MT) - 5AT

envy

1. Brand of Rim - Rays Forged (370 z nissian rim)
2. Rim size - front 19x9 / rear 19x10
3. Offset - +47 front +30 rear
4. Brand of tire - pirelli p zero
5. Tire size -245-40-19 fronts - 275/35/19 rears
6. Drop Type & Height - Stock (rear has 2 shims each side)
7. Do they rub - rubbing on turns... (70 mph on a bend) and 2 people in rear on a dip
8. Transmission type - auto

moesalamah

aznxstylez

Do you have cambers from front to back or just the back

daciss

daciss

Polishacorn

1.Brand of Rim - Avant Garde M580
2.Rim size - 19X8.5
3.Offset - +35
4.Brand of tire -Bridgestone SO4
5.Tire size -245/35/19
6.Drop Type & Height - TEIN Street basis 25" ground to fender
7.Do they rub - only in reverse on inner plastic fender when full lock
8.Transmission type - 5AT, Type S, close fit to brakes

Eschott1985

1.Brand of Rim - FK Ethos
2.Rim size - 20X8.5
3.Offset - +35 (all around)
4.Brand of tire - falken azenis pt-722
5.Tire size -235/30/20
6.Drop Type & Height - Stock with A-Spec kit
7.Do they rub - Not one bit
8.Transmission type - 5AT, Base

1985bmxtl

1 rim brand xxr531
2 rim size 19×8.5 19×10
3 offset +35 all round
4 tire brand ohtsu fp8000
5 tire size 235 35 19 255 35 19
6 drop tein street advanced still could go lower
7 do they rub rolled all fenders still rub inner front fender liner just sometimes
8 trans 5at

JD TL-S

iTrader: (1)

BeezleTL85

Will a 245x40x19 on a 19x8.5? I know a 235x40x19 will fit for sure but the price on those are like 225-300 from what im looking at vs the 245's are "regularly" priced, basically all under 200 per

1985bmxtl

245s will look meaty on a 8.5 and they will throw your spedo off because there taller especially with a 40 series tire.i would go with 235×35×19

BeezleTL85

1. Brand of Rim - Stance
2. Rim size - 19x8.5 all around
3. Offset - +35
4. Brand of tire - Michelin Pilot Super Sport
5.Tire size - 235x35x19
6. Drop Type and Amount - ISC, not sure on amount.
7. Do they rub - Only when I enter my steep driveway.
8. Transmission type - 5AT

Joseph Stansbury

OMG these look amazing! Do they rub?

Joseph Stansbury

Nice!

Joseph Stansbury

Dude, there's a tornado coming?

story.customz

1.Brand of wheel - Prodrive Reps
2.Wheel size (diameter and width) - 18 x 9.5
3.Offset - +22
4.Brand of tire - Nankang fronts, Michelin Pilot Sport A/S 3 rears
5.Tire size - 225/40, 235/40
6.Drop Type and Amount - BC Racing - 2.5" front, 2" rear
7.Do they rub - No
8. Transmission type - AT

justin.w13.walker

1.Brand of wheel - Stock Type-S
2.Wheel size (diameter and width) - 17X 8
3.Offset - +30
4.Brand of tire - continental
5.Tire size - ?
6.Drop Type and Amount - H&R Race Springs & TruHart Struts (2 in)
7.Do they rub - NO
8. Transmission type - AT

sethman2000

New rims today.

18x8 +35 lowered on Tanabe DF210 springs and Koni yellows. Need to put the fronts down a perch...

2Morrow

Looks good!

sethman2000

Sorry guys... Here is the correct format

Brand of wheel - Advanti HY Hybris
2.Wheel size (diameter and width) - 18x8
3.Offset - +35
4.Brand of tire - Capitol
5.Tire size - 235/40/18
6.Drop Type and Amount - Tanabe DF-210 koni yellow
7.Do they rub - NO
8. Transmission type - 6MT, clears Brembos

Slayer-33

iTrader: (1)

Clean AF you sob, very nice.

TonyN923

Brand of wheel - AME Spec-R two piece
2.Wheel size (diameter and width) - 18x9.5F 18x10R
3.Offset - +45 fronts, +42 rear
4.Brand of tire - GT-Radials
5.Tire size - 245/40/18
6.Drop Type and Amount - Tein S-Tech, about 1.5 all around
7.Do they rub - NO
8. Transmission type - Base Auto

camber set at 1.0 all around, no fender mods, no rubbing even with a fully loaded car. Wheels are flush with the fenders without being "stanced", perfect for my daily driver.

VisualEchos

iTrader: (1)

Finally got my BC Racing coilovers on, so I thought I'd update mine. I initially chose the 255/40 (which is a ½" too tall) over the 255/35 because I was going to leave the car at stock height. The tires seemed a bit tall a that time, because of the wheel gap. Once the gap was gone the tires set just perfect.

1.Brand of wheel - Miro 112
2.Wheel size (diameter and width) - 18 x 9.5
3.Offset - +40
4.Brand of tire - Conti DW
5.Tire size - 255/40
6.Drop Type and Amount - still settling, I'll let you know
7.Do they rub - No
8. Transmission type - AT

daciss

17 inch TSW Interlagos.

aussie_tl

1.Brand of wheel - Stock Type-S
2.Wheel size (diameter and width) - 17X 8
3.Offset - +30
4.Brand of tire - continental
5.Tire size - ?
6.Drop Type and Amount - H&R Race Springs & TruHart Struts (2 in)
7.Do they rub - NO
8. Transmission type - AT

aussie_tl

1.Brand of wheel - XXR 530
2.Wheel size (diameter and width) - 18x8.75
3.Offset - +20
4.Brand of tire - Nankang NS-20
5.Tire size - 225/40/18
6.Drop Type and Amount - Tein SA Coilovers, not sure on drop.
7.Do they rub - NO (rolled rear fenders)
8. Transmission type - AT

serpent

Wow, nice setup, wheels remind me of the Hellcats:

AD614

Have to say, I'm really loving the setup.

Acuraluvr

iTrader: (2)

1. Brand of Rim - Avant Garde M510
2. Rim size - 19x8.5 front, 19x9.5 rear
3. Offset - +35, +40
4. Brand of tire - Continental DWS
5.Tire size - 245x35x19 all around, minor stretch on back
6. Drop Type and Amount - Tein H spring, .8-1.0 inch drop
7. Do they rub - Nope
8. Transmission type - 5AT