Custom headlights by JnC, part III.
The following users liked this post:
BigNose3000 (02-06-2014)
08-08-2012, 10:45 AM
#363
1) Do not do anything with the factory 9005 outputs after the retrofit is done
2) To make the setup run quad low beams, you will actually want to tap the input on your relay harness into the 2 wire connector that power one of the existing OEM HID ballasts
3) To make the bi-xenon high beams work at the same time as the existing bixenon high beams on the TL projector, tap the solenoids in with their solenoids wiring
Basically, we're just going to piggyback the signals for the new setup off the signals for the existing bixenon setup and ignore the fact that the DRL is there all together, they'll just hang loose
Matt
2) To make the setup run quad low beams, you will actually want to tap the input on your relay harness into the 2 wire connector that power one of the existing OEM HID ballasts
3) To make the bi-xenon high beams work at the same time as the existing bixenon high beams on the TL projector, tap the solenoids in with their solenoids wiring
Basically, we're just going to piggyback the signals for the new setup off the signals for the existing bixenon setup and ignore the fact that the DRL is there all together, they'll just hang loose
Matt
08-12-2012, 10:32 PM
#364
Advanced
JnC how mush to get this done and how long would it take if I ship you mine to get done? Plus is the V2 keep the chrome bar and the rings untouched? Sorry still a bit of a newbie when it comes to the versions. What I'd want is this:
07-08 Type S headlights
Color matched CBP V2
CF overlays
Thanks!
07-08 Type S headlights
Color matched CBP V2
CF overlays
Thanks!
08-13-2012, 07:55 AM
#365
Former Sponsor
Thread Starter
iTrader: (12)
JnC how mush to get this done and how long would it take if I ship you mine to get done? Plus is the V2 keep the chrome bar and the rings untouched? Sorry still a bit of a newbie when it comes to the versions. What I'd want is this:
07-08 Type S headlights
Color matched CBP V2
CF overlays
Thanks!
07-08 Type S headlights
Color matched CBP V2
CF overlays
Thanks!
PM sent.
08-13-2012, 08:01 AM
#366
Former Sponsor
Thread Starter
iTrader: (12)
Paul's type S conversion
Paul sent in a set of used Type S headlights that were in poor shape, previous owner had aggressively sanded the front lenses to remove old spray on tint, which he did a poor job of removing and then clear coated the headlights.
Paul wanted to install these onto his 2006 TL and wanted something inspired by rockstar143's headlights. Beside the modification a custom harness was made in order for the 7443 bulbs to be plug and play with the 1157 type S turn signal application.
BTW credit to rockstar143 for the inspiration
Details
2007 Type S headlights
Blacked out V2 (Satin black)
Painted chrome strips (satin black)
USR clear diffusers
Painted projector and DRL bezels (custom blue)
ZKW-R lenses
Refinished front lenses.
Paul wanted to install these onto his 2006 TL and wanted something inspired by rockstar143's headlights
. Beside the modification a custom harness was made in order for the 7443 bulbs to be plug and play with the 1157 type S turn signal application. BTW credit to rockstar143 for the inspiration
Details
2007 Type S headlights
Blacked out V2 (Satin black)
Painted chrome strips (satin black)
USR clear diffusers
Painted projector and DRL bezels (custom blue)
ZKW-R lenses
Refinished front lenses.
The following users liked this post:
rockstar143 (08-13-2012)
08-13-2012, 08:18 AM
#367
Paul wanted to install these onto his 2006 TL and wanted something inspired by rockstar143's headlights . Beside the modification a custom harness was made in order for the 7443 bulbs to be plug and play with the 1157 type S turn signal application.
BTW credit to rockstar143 for the inspiration
Details
. Beside the modification a custom harness was made in order for the 7443 bulbs to be plug and play with the 1157 type S turn signal application. BTW credit to rockstar143 for the inspiration
Details
I have to tell you, I haven't visited the site in quite a while...just happened to stop in today and BAM, saw the blue rings and thought...COOL!
Thank you very much for giving me credit for it...I was iffy on doing it, but ended up really loving how it looked. I'm glad others enjoyed it too.
Take care, man.
J.
The following 2 users liked this post by rockstar143:
JnC (08-13-2012),
Undying Dreams (08-14-2012)
09-01-2012, 05:14 AM
#369
Former Sponsor
Thread Starter
iTrader: (12)
David's headlights
David, sent in his oem 04 TL headlights to get them modified and rejuvenated. Some one in the past had tried to clear the front lenses and applied some sort of clear on it that had chewed through the front lenses pretty bad. At first I was a little apprehensive towards the idea of spending time to rejuvenate these headlights as the front lenses were in awful shape but after spending close to 4 hours on the lenses I think the result speaks for itself. The OEM Fresnel lenses were replaced with ZKW-R clear lenses, internals were painted hi gloss black, a set of Type S diffusers with amber pieces painted gloss black were also added.
Details
04-05 TL headlights
Blacked out V2 (Gloss black)
ZKW-R lenses
Complete front lens restoration
Type S diffusers with painted amber pieces
Painted fog light bulb covers
. The OEM Fresnel lenses were replaced with ZKW-R clear lenses, internals were painted hi gloss black, a set of Type S diffusers with amber pieces painted gloss black were also added. Details
04-05 TL headlights
Blacked out V2 (Gloss black)
ZKW-R lenses
Complete front lens restoration
Type S diffusers with painted amber pieces
Painted fog light bulb covers
09-11-2012, 11:23 PM
#371
hi, JnC, i want to do the Blacked out V2 gloss black and ZKW-R lenses, how much you will charge for? thanks
[QUOTE=JnC;13793603]I havent been that active at taking pictures/details lately as I usually am but here are some pictures of some of the most recent Acura projects.
Details
Type S headlights
Blacked out V2 gloss black
ZKW-R lenses
hidden single LED halo (inspired by jptls04's headlights)
[QUOTE=JnC;13793603]I havent been that active at taking pictures/details lately as I usually am but here are some pictures of some of the most recent Acura projects.
Details
Type S headlights
Blacked out V2 gloss black
ZKW-R lenses
hidden single LED halo (inspired by jptls04's headlights)
09-12-2012, 12:38 PM
#372
Suzuka Master
^ Please show pics when they are installed
09-13-2012, 06:14 AM
#374
Former Sponsor
Thread Starter
iTrader: (12)
Thanks, I haven identical set of those for sale if anyone is interested .
https://acurazine.com/forums/car-parts-sale-361/04-05-darkness-theme-headlights-868091/
. https://acurazine.com/forums/car-parts-sale-361/04-05-darkness-theme-headlights-868091/
09-17-2012, 06:14 AM
#376
09-18-2012, 07:47 AM
#379
makes it a dual projector, just really looks cool, doubtful it's very useful as far as much better light output since most of your usable light comes from the main projector.
JNC, for those that needed MAJOR restoration, I'd love it if you posted up ONE pre work picture. I think people would gain a MAJOR appreciation for what you do if they saw what you were starting with some of the time.
As per usual, amazing work.
J.
JNC, for those that needed MAJOR restoration, I'd love it if you posted up ONE pre work picture. I think people would gain a MAJOR appreciation for what you do if they saw what you were starting with some of the time.
As per usual, amazing work.
J.
The following users liked this post:
JnC (09-18-2012)
i have a restoration job id be willing to let you use for demonstration purposes
09-18-2012, 08:35 AM
#381
Former Sponsor
Thread Starter
iTrader: (12)
makes it a dual projector, just really looks cool, doubtful it's very useful as far as much better light output since most of your usable light comes from the main projector.
JNC, for those that needed MAJOR restoration, I'd love it if you posted up ONE pre work picture. I think people would gain a MAJOR appreciation for what you do if they saw what you were starting with some of the time.
As per usual, amazing work.
J.
JNC, for those that needed MAJOR restoration, I'd love it if you posted up ONE pre work picture. I think people would gain a MAJOR appreciation for what you do if they saw what you were starting with some of the time.
As per usual, amazing work.
J.
Thanks for the kind words, J. I actually love working on projects that have been ruined by a DIY job or another retro-fitters. I guess I love a good challenge
. Here are a few recent examples.
Brian sent over his headlights a week or so ago, he had done a DIY project a few months back but for some reason the the fumes from the clear coat inside the headlights ate up the inside of the front lenses. Both the lenses had sever damage due to this chemical reaction, they were both refinished and clear coated on the inside plus the added mods.
Details
2012 TL headlights
TSX-R lens swap with custom cut off shields.
Silver painted front ridges
Repainted chrome strip on the side silver
Re-installed amber diffusers, tinted black.
Thin SMD halos
Before pictures
After pictures
Picture showing halo output with camera brightness at minimum
and now at normal brightness
Details
2012 TL headlights
TSX-R lens swap with custom cut off shields.
Silver painted front ridges
Repainted chrome strip on the side silver
Re-installed amber diffusers, tinted black.
Thin SMD halos
Before pictures
After pictures
Picture showing halo output with camera brightness at minimum
and now at normal brightness
RLCLAW sent his modified headlights to be fixed recently.
Issues on arrival
- Bad seal
- Scratches on the outside of the lenses
- Scratches and damaged clear coat on the inside of the lenses
- Damaged silicone channel
- Water residue on the inside passenger side lens
Modifications
- Fixed silicone channel
- Removed/replaced all old sealant with black kioto sealant
- Resurfaced and clear coated both inside and outside of the lenses
- Replaced OEM ballast gaskets.
Before
After
Pictures to show clarity of the front lenses.
Issues on arrival
- Bad seal
- Scratches on the outside of the lenses
- Scratches and damaged clear coat on the inside of the lenses
- Damaged silicone channel
- Water residue on the inside passenger side lens
Modifications
- Fixed silicone channel
- Removed/replaced all old sealant with black kioto sealant
- Resurfaced and clear coated both inside and outside of the lenses
- Replaced OEM ballast gaskets.
Before
After
Pictures to show clarity of the front lenses.
The following users liked this post:
rockstar143 (09-18-2012)
09-18-2012, 10:38 AM
#382
WOW...I'm awestruck...you do some really killer work.
I'm an apprentice for plastic restoration. I've gotten to the point where I can get the lens to look good, but longevity to withstand the sun again is where I lack. I also need to get a much much smaller backing plate/pads for my porter cable. I make due with the rotary and 8.5" curved pads but that wouldn't work for the interior of the lens.
Anyway, I appreciate you sharing those...Great job!
I'm an apprentice for plastic restoration. I've gotten to the point where I can get the lens to look good, but longevity to withstand the sun again is where I lack. I also need to get a much much smaller backing plate/pads for my porter cable. I make due with the rotary and 8.5" curved pads but that wouldn't work for the interior of the lens.
Anyway, I appreciate you sharing those...Great job!
09-21-2012, 02:39 AM
#383
New Customer
Hi JnC,
I sent an email to you in regards to my 04TL headlight project. Hopefully you're still at rook786@aol.com
Thx
I sent an email to you in regards to my 04TL headlight project. Hopefully you're still at rook786@aol.com
Thx
09-22-2012, 08:46 AM
#385
09-26-2012, 11:29 AM
#388
Former Sponsor
Thread Starter
iTrader: (12)
Paul's headlights
Paul, sent in his OEM headlights for some JnC treatment over the past weekend. Headlights are from an 06 TL and the years hadnt been kind to the front lenses. Both the lenses were fully restored and clear coated upon completion of the project. Here are some before and after pictures, enjoy
Details
06 TL headlights
Blacked out V2
Type S OEM diffusers
ZKW-R lenses
Satin black
Full front lens restoration
Before (OEM)
Before (Modified)
After (Modified)
upon completion of the project. Here are some before and after pictures, enjoy Details
06 TL headlights
Blacked out V2
Type S OEM diffusers
ZKW-R lenses
Satin black
Full front lens restoration
Before (OEM)
Before (Modified)
After (Modified)
The following users liked this post:
JnC (10-15-2012)
10-07-2012, 01:37 PM
#393
Former Sponsor
Thread Starter
iTrader: (12)
tlmailman's headlights
Details
04-05 TL headlights
Blacked out V2 (darkness theme)
Painted fog light cover
Painted chrome strip
Type S diffusers
Hybrid TL projectors
ZKW-R lenses
04-05 TL headlights
Blacked out V2 (darkness theme)
Painted fog light cover
Painted chrome strip
Type S diffusers
Hybrid TL projectors
ZKW-R lenses
10-08-2012, 06:42 PM
#395
Instructor
"Chrome on the reflector bowls for 06+ model TLs is better finished than 04-05 model reflectors but the early 04 model TL projectors used step style cut off shields, you pair the both together i.e. cut off shields/front halves from the 04 model TL projectors with the 06+ bowls and you have the hybrid TL projectors .
Light spread is more even with less hot spots." quote from JnC's response to my exact question.
. Light spread is more even with less hot spots." quote from JnC's response to my exact question.
The following users liked this post:
ibtrue2my04TL (10-13-2012)
10-15-2012, 06:57 AM
#396
Former Sponsor
Thread Starter
iTrader: (12)
ibtrue2my04TL's headlights
Details
04-05 TL headlights
Color matched V2 (AM)
Painted chrome strip (AM)
Painted fog light bulb cover (AM)
ZKW-R lenses
USR Clear diffusers
Resurfaced polished front lenses
04-05 TL headlights
Color matched V2 (AM)
Painted chrome strip (AM)
Painted fog light bulb cover (AM)
ZKW-R lenses
USR Clear diffusers
Resurfaced polished front lenses
The following users liked this post:
JnC (10-15-2012)
10-15-2012, 10:40 AM
#399
I'm knew to Acurazine and I just found this thread.. I want a pair of headlights from you but I need a month or 2 as I have other mods and expenses underway. Is there any risk if I were wait a month or 2 before ordering? It seems like you've been doing this for a while and I didn't want to miss out on the opportunity - if you were planning to stop soon.
10-15-2012, 01:05 PM
#400
JnC-you're the go to guy for headlight restoration....they look awesome!! and even more so when they will be in my hands. Just text me the info I need to complete the transaction. Thanks-Eddie
