noleaf74

Just sold my TL which was sitting on a set of 18s when I sold her so I still have two sets of wheels in my apartment that I am looking to get rid of. Here is some info on both sets.

Works: 19x8 +50 offset, wrapped in 225/35/19 toyo proxes 4 tires. The tires have about 15-20% tread left on them, so a few more miles but they will probably need to be replaced relatively soon. The wheels have some minor curb rashes (no longer than an inch) on a few of them. I'll take some shots of the rashes as soon as I can. One of the wheels is damaged on the hub; specifically the lug hole has been worn down so the wheel doesn't sit right on the car. I'm not sure if it is able to be repaired or not. Obviously the price is going to reflect this.

I paid about 3700 for these new and I'm looking to get 500 for them (local pickup). If I have to ship them I am willing to do so but at the cost to the buyer. Shipping should cost roughly between 120 -200. Accepting all reasonable offers, except trades.

The other set of wheels are my 2001 Stock 16s". Again more pics to follow. The 16"s are in great condition, wrapped in the stock tires still, which probably have a 20-30% tread left on them. I'm looking to sell those for 200(local pickup) again willing to ship but at the buyers expense.

Here are some shots of the works on the car.

JnC

iTrader: (12)

Dibbs on the works, send me a shipping quote for zip 01730 and also pictures of the rash and damage to the hub.

noleaf74

you've got a pm!

websters03

ill hold the 2nd place if JNC backs out. id also like pics of the damaged wheels(esp the hub damage) and shipping to 91911. thanks.

brianlin87

iTrader: (1)

bump for an OG member!

noleaf74

Thanks for the bump man, ya i've been hanging around here for quite a while. I'm going to work on posting some pics of the damaged hub today when I get off from work, stay tuned.

Also I found a website today that did say they could fixed worn lug holes, by welding and redrilling the holes, so it is possible to fix the one damaged wheel. I'm sure the cost will varry some but it is possible to repair it apparently, just gotta find the right place.

noleaf74

Bump

Here are some shots of the mounting rash, hub damage and tread. I've also attached a link to website that says they can repair this kind of damage. Check their FAQs and it says that can weld and redrill the lug holes to be good as new. I'm not sure how much it will cost but again the price is designed to reflect the one damaged wheel.

Both sets are still up for grabs as of right now. Here is the link to the wheel repair place. http://www.fixrim.com/?gclid=CKTZ49fG35kCFQIwxwodeEi1jA


Here you can see how the lug holes are just slightly oblong shape instead of round. This happened because the tapper on my lug nuts was apparently incorrect. I wasn't happy with the shop that mounted the new lugs on but there wasn't much I could do in terms of reprocussion.



minor curb rash, this is the most significan rash on the wheels and it is hardly noticable. Probably happened during the mounting onto the tires.



2 tires have about 50-75% tread on them, they look like this



2 of the tires have some inside camber wear, still good for a bit longer, but will need to be replaced soon

noleaf74

Price Drop to 400 + shipping OBO! considering the one wheel needs to be fixed and two of the tires have some camber wear I'm dropping the price on these.

Juancachorro

pm me shipping quote to 10532. Thanks

NoLimitDeC

ive been seeing these on craigslist for a while.. have you found out if that 1 wheel is repairable yet?

noleaf74

Yes, talked to a few places and the one wheel is repairable. There is a link included in the thread to one of the places that I spoke with. they quoted me at 150 to repair it I believe.

Willie3.5

Any pictures of the actual rims? That might help the rims sale...

noleaf74

I'm going to try to make some time to take some better pictures of the wheels this week.

pimpstaman90

Sold to muh... Thanks and also a get a seller... Also had a nice TL

noleaf74

yep the works are sold. Could a mod close this thread. I am going to start a new one for the 16s as soon as I have some time to drag them out and take pictures.

Thanks.