4G TL (2009-2014)
Sponsored by:
Sponsored by: DashLynx

2012 TL OEM Underbody Spoiler advise

Thread Tools
 
Search this Thread
 
Old 12-23-2011, 05:44 PM
  #1  
Cruisin'
Thread Starter
 
Z4Rider's Avatar
 
Join Date: Dec 2011
Location: PA
Posts: 21
Likes: 0
Received 2 Likes on 2 Posts
2012 TL OEM Underbody Spoiler advise

I have searched this forum and haven't found anything on actual installed cost on the underbody spoiler kit for front, back and sides of a 2012 TL/SH-AWD. I see the list cost at the dealer but am sure that the price can be negociated down. Plus the dealer price doesn't include intallation. Any suggestions would be appreciated.
Old 12-23-2011, 08:20 PM
  #2  
Advanced
iTrader: (1)
 
AEmedic's Avatar
 
Join Date: Dec 2011
Location: Madison, AL
Age: 53
Posts: 89
Received 4 Likes on 4 Posts
I am sure you can get below $1500 installed with BSMs...
Old 12-26-2011, 03:21 PM
  #3  
8th Gear
 
dditty708's Avatar
 
Join Date: Dec 2011
Age: 39
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Got my 2012 full kit and installation at Acura of OP in FL for $1400..
Old 12-26-2011, 03:22 PM
  #4  
8th Gear
 
dditty708's Avatar
 
Join Date: Dec 2011
Age: 39
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
It looks great by the way you should for sure get it..
Old 12-26-2011, 04:05 PM
  #5  
Safety Car
 
erick3's Avatar
 
Join Date: Feb 2006
Location: Seattle, Washington
Age: 35
Posts: 4,163
Received 7 Likes on 6 Posts
I've been out of the game for a while, but IIRC - the newer 4G kits come as individual pieces (in the rear), no? DIY it! A couple bolts + 3M tape and you're probably set. I'd image there's no more drilling required (3G Aspec Kits) for the rear lip no? Cost = FREE
Old 12-26-2011, 07:47 PM
  #6  
2G TLX-S
 
Edward'TLS's Avatar
 
Join Date: Dec 2000
Location: YVR
Posts: 10,172
Received 1,133 Likes on 813 Posts
^^^^^ Both the front and the rear aero pieces for the 2012TL DO require drilling many holes into the bumpers.
The following users liked this post:
montanadiver4 (04-13-2016)
Old 12-27-2011, 11:03 AM
  #7  
Moderator
 
potmilkz's Avatar
 
Join Date: May 2010
Location: Southern Cali 626 area
Age: 36
Posts: 7,101
Received 1,020 Likes on 792 Posts
diy.. if your not able to do this, you might as well get out of the modding game asap.
Old 12-27-2011, 04:29 PM
  #8  
Cruisin'
Thread Starter
 
Z4Rider's Avatar
 
Join Date: Dec 2011
Location: PA
Posts: 21
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by dditty708
It looks great by the way you should for sure get it..
I will probably do it. However I have seen somewhere that the back looks pretty tacky on the 2012. Your thoughts??
Old 12-31-2011, 11:03 AM
  #9  
Racer
iTrader: (2)
 
audi_to_TL's Avatar
 
Join Date: Dec 2004
Location: Vancouver, BC
Age: 44
Posts: 368
Received 3 Likes on 3 Posts
Just ordered the kit for my TL. 1420 and change incl tax and install in Lynnwood, WA.
Old 01-02-2012, 02:19 AM
  #10  
2G TLX-S
 
Edward'TLS's Avatar
 
Join Date: Dec 2000
Location: YVR
Posts: 10,172
Received 1,133 Likes on 813 Posts
Originally Posted by audi_to_TL
Just ordered the kit for my TL. 1420 and change incl tax and install in Lynnwood, WA.
Watch out for the shop boys tipping off Canada Customs, when you head back to Canada without declaring your new additions.
The following users liked this post:
sebounet2005 (01-02-2012)
Old 01-02-2012, 11:39 AM
  #11  
Racer
iTrader: (2)
 
audi_to_TL's Avatar
 
Join Date: Dec 2004
Location: Vancouver, BC
Age: 44
Posts: 368
Received 3 Likes on 3 Posts
Originally Posted by Edward'TLS
Watch out for the shop boys tipping off Canada Customs, when you head back to Canada without declaring your new additions.

Really?? I have bought Aspec wheels, body kit, short shifter all from lynnwood for my 05 TL and dont think they would do that.

Thanks for the heads up though
Old 01-02-2012, 02:03 PM
  #12  
TL 2012 SH-AWD TECH/UMBER
 
sebounet2005's Avatar
 
Join Date: Oct 2004
Location: canada Montreal
Age: 56
Posts: 580
Received 5 Likes on 5 Posts
Sorry may be i don't understand (not bilingual) but do you mean that the shop where the job was done will send some information to the custom ? If yes, Must they do that ?

Will it be the same thing if you put some new tires in USA ?
Old 01-02-2012, 02:07 PM
  #13  
Racer
iTrader: (2)
 
audi_to_TL's Avatar
 
Join Date: Dec 2004
Location: Vancouver, BC
Age: 44
Posts: 368
Received 3 Likes on 3 Posts
Originally Posted by sebounet2005
Sorry may be i don't understand (not bilingual) but do you mean that the shop where the job was done will send some information to the custom ? If yes, Must they do that ?

Will it be the same thing if you put some new tires in USA ?

I have bought at least 4 sets of tires in the US driven accross without any issues.

I highly doubt any shop in the US would call canada customs to say you bought something at their store.

Whats next bestbuy calling canada customs to say I bought some dvd's?

It just doesnt make any sense.
Old 01-03-2012, 02:00 AM
  #14  
2G TLX-S
 
Edward'TLS's Avatar
 
Join Date: Dec 2000
Location: YVR
Posts: 10,172
Received 1,133 Likes on 813 Posts
Some years back, I had a friend installed 4 new tires in the US. He was fined by Canada Custom for not declaring the new tires at the border crossing. One of the officers accidentally leaked out that they were being tipped off.

It wouldn't be the tire shop itself because it more than welcomed your business and your $$$. So it had to be the minimum-wages low-life working in the tire shop, who tried to get some reward by sending in the tip.

But if you have done this before in Lynnwood with no problem, then all the people there are good people.
Old 01-13-2012, 12:52 AM
  #15  
Racer
iTrader: (2)
 
audi_to_TL's Avatar
 
Join Date: Dec 2004
Location: Vancouver, BC
Age: 44
Posts: 368
Received 3 Likes on 3 Posts
I had the body kit installed and car lowered at lynnwood acura.

Got lucky at the border...got thru without a scratch.

No duty or taxes

Kit looks good...I will try and get some pics up within a couple days.

Gotta install my rear roof/window ebay spoiler first.

Anyone local that can help me out?
Old 01-16-2012, 03:40 AM
  #16  
Ronin
 
SlyGuy0975's Avatar
 
Join Date: Jul 2004
Location: Naperville, IL
Age: 48
Posts: 7
Likes: 0
Received 1 Like on 1 Post
I got the 2012 OEM body kit for $860 USD and I had it installed at McGrath Acura in Westmont, IL for $360 USD. So Grand Total: $1,220. If you shop around and purchase the kit and install at the same Acura shop you can probably negotiation them down between $1,300 - $1,600. The reason for such a large gap in price is labor. When I was pricing labor only I got prices between $360 - $588. One dealer told me straight up that they hate installing these new kits so that's why they charge so high on the labor. I didn't mind investing time to price around and most Acura dealers have no problems installing original Acura parts so that's usually not a problem. Good luck...
Old 01-21-2012, 01:27 PM
  #17  
Advanced
 
rbailey's Avatar
 
Join Date: Dec 2011
Location: South Carolina
Age: 53
Posts: 59
Received 1 Like on 1 Post
Slyguy....You bought from dealer for $820? I was told $1345 locally in Dayton Ohio and $1104 from Lynwood Acura on ebay? I have 2010 sh-awd.
Old 07-23-2014, 04:54 PM
  #18  
10th Gear
 
rockky872's Avatar
 
Join Date: Jul 2014
Location: Louisville, KY
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
new owner

do you guys have a link/website where i can order a kit for my 2012 tl. all i have been able to find is the ron jon. help please... thank you
Old 07-23-2014, 07:30 PM
  #19  
Burning Brakes
 
types1fan's Avatar
 
Join Date: Jun 2010
Location: The boogie down
Posts: 1,209
Received 93 Likes on 88 Posts
^^ Call acura of Lynwood and ask for Rob
Old 07-24-2014, 12:33 AM
  #20  
Moderator
 
potmilkz's Avatar
 
Join Date: May 2010
Location: Southern Cali 626 area
Age: 36
Posts: 7,101
Received 1,020 Likes on 792 Posts
just a little tip for you first time installers...

i install kits for the local socal guys.. did over 10 kits now and to tell you the truth its not hard.

only hard part is getting the side skirts off.

front lip takes about 20-30 mins to install. its litterally like 3-4 holes each side and slip the clips in the holes then remove the 3m tape.

rear is exactly the same process.

dont try to do it with the bumper on the car, you will never get it to line up.
Old 07-24-2014, 08:33 AM
  #21  
rock the block
 
lift3d_'s Avatar
 
Join Date: Dec 2013
Location: Waterloo, Ontario
Age: 33
Posts: 730
Received 143 Likes on 116 Posts
I got quoted $1500 plus HSTfor installation and parts from Fairview Acura in KW, Ont.

It was broken out as follows:

$1,320.00 for parts
$330.00 for labor

salesguy was willing to offer $1500 if I sent him photos of my car first , his service advisor had talked it up
Old 07-24-2014, 10:05 AM
  #22  
2014 TL SH-AWD Advance
 
03sixer's Avatar
 
Join Date: Dec 2006
Location: Charleston, IL
Age: 55
Posts: 291
Received 18 Likes on 14 Posts
You can buy the kit online here from an acura dealer for $975 shipped. That means you're really paying $525 labor.
Old 10-10-2014, 09:55 PM
  #23  
1st Gear
 
TTLEE's Avatar
 
Join Date: Sep 2014
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
hi. i'm NEW to this forum. just bought a 2012 TL SHAWD. looking for a rear spoiler to buy? can someone recommend me one to buy on ebay? can be OEM or aftermarket...doesn't matter? help? thank you!
Old 10-11-2014, 01:17 PM
  #24  
Intermediate
 
djoulez's Avatar
 
Join Date: Sep 2014
Posts: 31
Likes: 0
Received 2 Likes on 2 Posts
Anyone know if the pre 2012 and post 2012 rear lip kits are compatible?

I know they changed the front grill in 2012 but was the rear bumper left the same?

Anyone on here have pictures of running a post 2012 front and sides but a 2010 rear lip?
Thanks!
Old 10-12-2014, 01:22 PM
  #25  
Moderator
 
potmilkz's Avatar
 
Join Date: May 2010
Location: Southern Cali 626 area
Age: 36
Posts: 7,101
Received 1,020 Likes on 792 Posts
2009-11 and 12+ are different rear bumpers
Old 10-13-2014, 01:47 PM
  #26  
Loading...
 
Dpak's Avatar
 
Join Date: Mar 2005
Age: 36
Posts: 225
Received 4 Likes on 4 Posts
I installed my 13' kit a couple months ago. Check the forums for the installation pdf or ask the dealer to send you some. Total install time was about 3 hours because the side skirts were a pita. Recommend you buy any hid fogs or switch backs before you take the front bumper off to knock out two birds with one stone.

If your familiar with legos or ikea furniture this install will be cake for you.
Old 06-20-2016, 10:34 AM
  #27  
Instructor
 
fryrice's Avatar
 
Join Date: Feb 2008
Location: MA
Age: 37
Posts: 213
Received 8 Likes on 8 Posts
Question for those who bought the kits, did you have to buy the bolts, clips, and moldings or did you just choose #1 (08F03-TK4-220A) and it comes with everything?
Old 06-20-2016, 12:30 PM
  #28  
keep it clean
 
AcuraIntegTL's Avatar
 
Join Date: Mar 2011
Location: SoCal
Posts: 415
Received 78 Likes on 70 Posts
Originally Posted by fryrice
Question for those who bought the kits, did you have to buy the bolts, clips, and moldings or did you just choose #1 (08F03-TK4-220A) and it comes with everything?
To my knowledge the kit comes with all the required hardware to install the kit. I ordered a kit for both my 3G and 4G TL and both came with the hardware. Good luck with your mods.
The following users liked this post:
fryrice (06-20-2016)
Old 06-21-2016, 12:07 PM
  #29  
Burning Brakes
iTrader: (1)
 
TheMuffinMan's Avatar
 
Join Date: Jan 2015
Location: Virginia
Posts: 993
Received 210 Likes on 158 Posts
If you purchase the actual kit piece and not an individual part it comes with everything required including instructions.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BoricuaTL
Car Parts for Sale
138
04-08-2016 01:08 PM
HOWELLiNC
3G TL Photograph Gallery
24
10-08-2015 03:15 PM
nash3222
Car Talk
1
09-10-2015 09:46 PM
MyKids&Cars
Car Parts for Sale
6
09-01-2015 12:53 PM



Quick Reply: 2012 TL OEM Underbody Spoiler advise



All times are GMT -5. The time now is 02:45 AM.