keyless remote for 2000 RL problems
#1
keyless remote for 2000 RL problems
Hi everyone.
I have a 2000 RL and I have a new keyless remote bob. Its a factory key bob and I saw the directions for programing it on this site. Unfortunately the procedure didnt work. How can you tell if the system entered the programing mode? While doing the on/off button pressing, I noticed a green symbol of a key in the display system. Is this telling me anything? I would appreciate any input. Thanks.
I have a 2000 RL and I have a new keyless remote bob. Its a factory key bob and I saw the directions for programing it on this site. Unfortunately the procedure didnt work. How can you tell if the system entered the programing mode? While doing the on/off button pressing, I noticed a green symbol of a key in the display system. Is this telling me anything? I would appreciate any input. Thanks.
#2
has been here awhile
Join Date: Jul 2003
Location: Charlotte, NC
Age: 37
Posts: 1,612
Likes: 0
Received 0 Likes
on
0 Posts
Starting in 2002, Acura switched remote locking systems on the RL. My understanding is that the 2002+ remotes are not compatible with 1996-2001 RLs.
A picture of the new remote is shown below:
The correct remote for your RL is below:
Someone may be able to correct me if I am wrong, as I have not tried linking one of the "new" remotes.
A picture of the new remote is shown below:
The correct remote for your RL is below:
Someone may be able to correct me if I am wrong, as I have not tried linking one of the "new" remotes.
#3
RL remote programming problems
Thanks for the reply. At least according to the pic's I have the right remote control. So the procedure I followed is the 4 times key to position II with button pressing on the remote. I've tried it many times with no success. I did it easily in the time allotted. Any ideas?
Thanks again.
Thanks again.
Thread
Thread Starter
Forum
Replies
Last Post
SidhuSaaB
3G TL Problems & Fixes
18
05-30-2020 12:40 AM
Mike Bertram
2G TL (1999-2003)
9
09-10-2015 09:27 AM