kibbles906

iTrader: (14)

hey

i have alittle problem with my 2008 TL-S..i just recently bought it and it had no navi disc inserted.. i took my disc from my other car which was the 2010 disc and i installed it in the 08 TL to make sure everything worked properly. it updated and took some time but it worked fine, so i took the disc out and put it back in my newer car.

i just recently picked up the 09 version disc for the TL-S and i inserted it and it wont take it, says the disc version is older then the software installed version.

what can i do now, is there a way to reset the navi software version to original setting..or do i have to spend 160 bucks for another 2011 disc to get it to work.

any help is appreciated

thanks

av2600

iTrader: (1)

1. Go to your car.
2. Turn your car's ignition to ACC.
3. Open the trunk and insert your navi disk.
4. Go back to the driver seat, the display will give you the message about the old version or whatever, now press and hold "GUIDE" "MENU" and "CANCEL" for approx 5 seconds to bring up the diagnostic menu.
5. Wait another 5 seconds to let it load up completely. Press "version" button on the screen
6. Press "LOAD DISC".
7. Wait until it finishes loading.