Time for me to retrofit the MDX Jewel eyes!!!
#81
Engineer
iTrader: (1)
the retrofit god has spoken.
how much for the MDX headlights??!!!
might as well custom the 3G TL to fit those instead right? LOL
mmm...let's see, i have patience, i have CAD skill, i have access to CNC machines, maybe this is a task for me! took me more than 3 years to complete my current headlights!
anyhow, i'm waiting to see OP's progress. i'm sure it'll be a good one!
how much for the MDX headlights??!!!
might as well custom the 3G TL to fit those instead right? LOL
mmm...let's see, i have patience, i have CAD skill, i have access to CNC machines, maybe this is a task for me! took me more than 3 years to complete my current headlights!
anyhow, i'm waiting to see OP's progress. i'm sure it'll be a good one!
Last edited by lights; 08-16-2014 at 11:08 AM.
The following users liked this post:
JnC (08-17-2014)
#82
Former Sponsor
iTrader: (12)
^^ You are the perfect candidate for this retro PM me for details.
BTW these are complete headlights with all the internal goodies such as adjustment knobs, AFS actuators, all the bezels etc etc. Only blemish is a small crack on the underside of the driver side headlight which can be easily mended if needed.
BTW these are complete headlights with all the internal goodies such as adjustment knobs, AFS actuators, all the bezels etc etc. Only blemish is a small crack on the underside of the driver side headlight which can be easily mended if needed.
#83
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Looks good JnC.
The following users liked this post:
Undying Dreams (08-21-2014)
#87
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 30
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
Where is OP?!
#88
2007 Type S WDP 5AT
Thread Starter
Im still waiting on shipping from USPS. The tracking number says they are in my country now a few cities over. So I hope to get them tomorrow so I can begin
The following users liked this post:
1black_seven (08-21-2014)
#92
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Where's the pics?????
The following 6 users liked this post by wojo1988:
1black_seven (08-22-2014),
Acura_Dude (08-22-2014),
corrado85 (08-22-2014),
nttstt444 (08-22-2014),
thoiboi (08-24-2014),
and 1 others liked this post.
#97
2007 Type S WDP 5AT
Thread Starter
^ Ill need to customize it. Basically rewire my old headlight harness into a connector and then into another connector. So I can revert to old headlights whenever
#98
2007 Type S WDP 5AT
Thread Starter
MODS: can you change title to say UPDATED! Pics inside
Im done for today and one is almost done. Vertical height adjustment is in there aswell. When I have my next free night off I can put them on my tl to do the side to side adjustment. Just a teaser for now!!!
Im done for today and one is almost done. Vertical height adjustment is in there aswell. When I have my next free night off I can put them on my tl to do the side to side adjustment. Just a teaser for now!!!
The following 16 users liked this post by wojo1988:
1black_seven (08-22-2014),
AcuraSraN (08-22-2014),
Acura_Dude (08-22-2014),
bluetl04 (08-22-2014),
corrado85 (08-22-2014),
and 11 others liked this post.
#99
2007 Type S WDP 5AT
Thread Starter
This is definitely not a beginner retro. Im about 5 hours in and have just finished cutting and jb welding on the 2 adjustment knobs onto the driver side. Im waiting for it to dry and then I can modify in the other adjustment screw onto the back side of the housing. Let me say that this is a super tight and close retro!
Ive got it where there is a cm gap around most of the heat sink and more in other areas. A few parts of the headlight need to be rebuilt, but the way I cut it should make it so easy to finish up. The 2 adjustment knobs are what holds the housing in place with one pivot point I put in aswell. Epic wont describe how this will look when im done. To play it safe ill say 2 weeks until its on the car. I still need to find a set of plastic lenses to close them up when im done.
Anyone??
Ive got it where there is a cm gap around most of the heat sink and more in other areas. A few parts of the headlight need to be rebuilt, but the way I cut it should make it so easy to finish up. The 2 adjustment knobs are what holds the housing in place with one pivot point I put in aswell. Epic wont describe how this will look when im done. To play it safe ill say 2 weeks until its on the car. I still need to find a set of plastic lenses to close them up when im done.
Anyone??
#101
2007 Type S WDP 5AT
Thread Starter
So much time is going into these. I do understand it is my first time doing the jewel eyes and as I did more it would get easier. But for the cost involved! I don't see many people dropping that much coin. Roughly 600 to get the jewel eyes to my door. Plus a spare set of tl headlights. 300 - 500. Then the labour ontop of it all! Easily 1500
#103
King of NYC
iTrader: (6)
I am just amazed how (at least from the front side horizontally) the LED array seem to be just the perfect squeeze for the TL headlight housing.
Being that the height of the TL headlight is less than the MDX means they will stand out even more prominently. Good luck wojo, looking good!
Being that the height of the TL headlight is less than the MDX means they will stand out even more prominently. Good luck wojo, looking good!
#105
So jealous. I may need to make this work in my ILX headlight if the 2016 doesnt see jewel eyes I can swap out.
#106
Moderator
iTrader: (3)
This is phenomenal. Can't wait for installed pics!
#109
2007 Type S WDP 5AT
Thread Starter
UPDATE! Got home from work and was able to mount the slides in which the jewel eyes slide on when you use the adjustment knobs. I need to now light them up on the car at night to see if the adjustment knobs can put the light into proper specs while projected on the wall. I might need to cut and adjust to make it so the jewels are level in the unit and with the car. As I get more and more into this process I see how tedious it is becoming and how perfect I am making it.
Im sure you could half ass it but I want this done properly and to last a long time! I now have the tl bezel cut out and on the jewel eyes. Next I also need to trim the jewel eye bezel to fit snugly behind the tl bezel
Im sure you could half ass it but I want this done properly and to last a long time! I now have the tl bezel cut out and on the jewel eyes. Next I also need to trim the jewel eye bezel to fit snugly behind the tl bezel
#110
2007 Type S WDP 5AT
Thread Starter
#119
2007 Type S WDP 5AT
Thread Starter
I did ask him about his. But he didn't want to reveal anything and that's fine. I respect that. So ive tackled this on my own and retrofit it my own custom way.
Im also not going to show how I mounted it and such in detail, but I will show a few more pics and then final pics when its done. I should have pics up tonight of the jewel eyes in the 3g tl headlights on the front of my car at night and light up in all modes. DRL, lows, highs.
STAY tuned!
#120
2007 Type S WDP 5AT
Thread Starter