Need help from somebody with Helm manual
#1
4th Gear
Thread Starter
Join Date: Aug 2004
Location: Westminster, MD
Age: 53
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Need help from somebody with Helm manual
I am trying to find out what friction area of front brake pads on 2gen CL.
Can some body with Helm manual tell me the spec?
It should be in specification chapter under design specification.
Thank you
Can some body with Helm manual tell me the spec?
It should be in specification chapter under design specification.
Thank you
#2
Senior Moderator
Fronts 59cm2 x 2 (9.1sq in x 2)
Rears 28cm2 x 2 (4.3sq in x 2)
Rears 28cm2 x 2 (4.3sq in x 2)
#3
Burning Brakes
Join Date: Feb 2004
Location: your moms house
Age: 41
Posts: 776
Likes: 0
Received 0 Likes
on
0 Posts
hey fsttyms1 I'm trying to hardwire my V1 radar detector can you possibly scan or take a digital pic of the drivers side fuse box wiring diagram in the helms manual. I gotto know which color wire and fuse goes to the cigerette lighter.
#4
Senior Moderator
hook it to the back side of the drivers side fuse panel. there is a spot (lower left) thats an accessory optional conector. its conected to fuse #8 all it takes to wire to it is a female spade conector
#5
Burning Brakes
Join Date: Feb 2004
Location: your moms house
Age: 41
Posts: 776
Likes: 0
Received 0 Likes
on
0 Posts
any way you can scan that page of the helms that shows a wiring diagram of the drivers side fuse box that shows what fuses go to which items and the colors of the wire that correspond with it?
#6
Senior Moderator
the manual doesnt show that. If you look at the back side you wont have to tap any wires with those conectors.
#27 is what i would use
#27 is what i would use
#7
Senior Moderator
OOOOOPS thats kinda big
Trending Topics
#8
Burning Brakes
Join Date: Feb 2004
Location: your moms house
Age: 41
Posts: 776
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for doing that for me,
hmm, im not near my car right now, how hard is it to get to the back of the box, and what kind of connection is that #27?
hmm, im not near my car right now, how hard is it to get to the back of the box, and what kind of connection is that #27?
#9
Senior Moderator
the back side its reall easy. you can see it from looking under the dash, or by removing the lower dash panel (1 screw) its a spade conector. All it takes is a female spade to conect to it)
#10
Senior Moderator
there is also 1 there that comes on with the headlights and 1 thats constant power
#11
Senior Moderator
this is from the gauge face diy but it shows you what you are looking for. you want teh lower left one
here is what you need to conect to them
here is what you need to conect to them
#13
Senior Moderator
no its a different one. Ive had things hooked int there or years now. thats what they are for, is adding accessories
#15
Burning Brakes
Join Date: Feb 2004
Location: your moms house
Age: 41
Posts: 776
Likes: 0
Received 0 Likes
on
0 Posts
yea fsttyms1 I hardwired my Valentine 1 last night and it works perfectly. Only wire you barely see is the wire going from the right side of the detector up to the headliner. And I snaked that wire inbetween the 2 suction cups. Looks cool. Due to the angle of our windshield and the placement of our rear view mirror, I mounted the detector centered underneith the rear view mirror as high as possible but where the rear-redar piece of the detector can see out my rear window without obstructing it's view. Looks cool.
#16
10th Gear
Join Date: Jul 2004
Location: San Jose
Age: 49
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Just to clarify, you want to connect the female spade connector to #27 and not #26 (which has red highlight around it). I'm a complete newbie on this but I want to hardwire my sirius receivers 12v power lead. It sounds like I can connect it directly to #27. Can I just connect the ground lead to anything that's metal in the area?
#17
Senior Moderator
Originally Posted by flexed2death
Just to clarify, you want to connect the female spade connector to #27 and not #26 (which has red highlight around it). I'm a complete newbie on this but I want to hardwire my sirius receivers 12v power lead. It sounds like I can connect it directly to #27. Can I just connect the ground lead to anything that's metal in the area?
#19
Senior Moderator
Originally Posted by sluudog
Is there a 5v connection there as well? I have a TomTom GPS unit that I would like to hard wire to the care that requires a 5v power source.
#21
Senior Moderator
does the cig lighter knock it down or goes the gps itself do it? You wont find a 5v connection in the car.
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
07-16-2017 07:33 AM
Biggie_B
5G TLX (2015-2020)
12
02-26-2017 11:14 AM
MetalGearTypeS
3G TL Audio, Bluetooth, Electronics & Navigation
6
08-29-2016 08:28 PM